-
Notifications
You must be signed in to change notification settings - Fork 2
/
Copy pathshell-definition.yaml
128 lines (123 loc) · 5.94 KB
/
shell-definition.yaml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
tosca_definitions_version: tosca_simple_yaml_1_0
metadata:
template_name: F5 BIG IP Firewall Shell 2G
template_author: Quali
template_version: 2.0.0
template_icon: shell-icon.png
description: >
This Shell supports F5 BIG-IP Firewall devices
imports:
- cloudshell_standard: cloudshell_firewall_standard_3_0_2.yaml
node_types:
vendor.firewall.F5 BIG IP Firewall 2G:
derived_from: cloudshell.nodes.Firewall
capabilities:
auto_discovery_capability:
type: cloudshell.capabilities.AutoDiscovery
properties:
enable_auto_discovery:
type: boolean
default: true
auto_discovery_description:
type: string
default: Describe the auto discovery
inventory_description:
type: string
default: Describe the resource shell template
User:
description: User with administrative privileges
type: string
Password:
description: The password is required by some CLI protocols such as Telnet and is required according to the device configuration.
type: cloudshell.datatypes.Password
Enable Password:
description: The enable password is required by some CLI protocols such as Telnet and is required according to the device configuration.
type: cloudshell.datatypes.Password
Sessions Concurrency Limit:
description: The maximum number of concurrent sessions that the driver will open to the device. Default is 1 (no concurrency).
type: integer
default: 1
SNMP Read Community:
description: The SNMP Read-Only Community String is like a password. It is sent along with each SNMP Get-Request and allows (or denies) access to device.
type: string
SNMP Write Community:
description: The SNMP Write Community String is like a password. It is sent along with each SNMP Set-Request and allows (or denies) chaning MIBs values.
type: string
SNMP V3 User:
description: Relevant only in case SNMP V3 is in use.
type: string
SNMP V3 Password:
description: Relevant only in case SNMP V3 is in use.
type: cloudshell.datatypes.Password
SNMP V3 Private Key:
description: Relevant only in case SNMP V3 is in use.
type: string
SNMP Version:
type: string
default: ''
description: The version of SNMP to use. Possible values are v1, v2c and v3.
constraints:
- valid_values: [ v1, v2c, v3]
SNMP V3 Authentication Protocol:
description: Relevant only in case SNMP V3 is in use.
type: string
default: No Authentication Protocol
constraints:
- valid_values: [No Authentication Protocol, MD5, SHA]
SNMP V3 Privacy Protocol:
description: Relevant only in case SNMP V3 is in use.
type: string
default: No Privacy Protocol
constraints:
- valid_values: [No Privacy Protocol, DES, 3DES-EDE, AES-128, AES-192, AES-256]
Enable SNMP:
description: If set to True and SNMP isn’t enabled yet in the device the Shell will automatically enable SNMP in the device when Autoload command is called. SNMP must be enabled on the device for the Autoload command to run successfully. True by default.
type: boolean
default: true
Disable SNMP:
description: If set to True SNMP will be disabled automatically by the Shell after the Autoload command execution is completed. False by default.
type: boolean
default: false
Backup Location:
description: Used by the save/restore orchestration to determine where backups should be saved.
type: string
Backup Type:
description: Supported protocols for saving and restoring of configuration and firmware files. Possible values are 'File System' 'FTP' and 'TFTP'. Default value is 'File System'.
type: string
default: File System
Backup User:
description: Username for the storage server used for saving and restoring of configuration and firmware files.
type: string
Backup Password:
description: Password for the storage server used for saving and restoring of configuration and firmware files.
type: cloudshell.datatypes.Password
Power Management:
type: boolean
default: true
description: Used by the power management orchestration, if enabled, to determine whether to automatically manage the device power status. Enabled by default.
Console Server IP Address:
description: The IP address of the console server, in IPv4 format.
type: string
Console User:
type: string
Console Port:
description: The port on the console server, usually TCP port, which the device is associated with.
type: integer
default: 0
Console Password:
type: cloudshell.datatypes.Password
CLI Connection Type:
type: string
description: The CLI connection type that will be used by the driver. Possible values are Auto, Console, SSH, Telnet and TCP. If Auto is selected the driver will choose the available connection type automatically. Default value is Auto.
default: Auto
CLI TCP Port:
description: TCP Port to user for CLI connection. If kept empty a default CLI port will be used based on the chosen protocol, for example Telnet will use port 23.
type: Numeric
default: 0
artifacts:
icon:
file: shell-icon.png
type: tosca.artifacts.File
driver:
file: F5BigIPFirewallShell2G.zip
type: tosca.artifacts.File