[General]
AutoFocus=1
Aero=1
SmartAero=1
StickyResize=1
InactiveScroll=0
MDI=1
AutoSnap=0
ResizeCenter=1
Language=en-US
MMMaximize=1
CenterFraction=24
AeroHoffset=50
AeroVoffset=50
MoveTrans=
[Advanced]
ResizeAll=1
PiercingClick=0
AutoRemaximize=0
AeroTopMaximizes=1
MultipleInstances=0
FullScreen=1
BLMaximized=0
SnapThreshold=20
AeroThreshold=5
AeroMaxSpeed=
AeroSpeedTau=32
[Zones]
UseZones=9
;UseZones=1; orig
; If set to 1, enables Snap Layouts (Zones)
; If set to 3, enables Grid mode (configure below)
; If 4 is added window is extended without Ctrl.
; If 8 is added snapping will occur without Shift ie: 1+8 => UseZones=9.
; Shift will disable Zones instead.
; recomended is UseZones=1 or 9 for normal snap Layout with or w/o shift
; and 3+4 => UseZones=7 for grid mode.
FancyZone=0
Zone0=0,30,640,1440,
Zone1=640,30,1920,1440,
Zone2=1920,30,2560,1440,
Zone3=-1064,46,-16,1904,
InterZone=0
;InterZone=32 ; orig
; Size in pixels between zones from -128 to +127 (default 32)
; where the window will be snapped to the union of zones.
; If set to 0, you cannot cover more than one zone.
[Blacklist]
Processes=
Windows=
Scroll=
MDIs=
Pause=
[Performance]
;FullWin=2; orig
FullWin=0
; Set to 1 to force the Drag Full Windows option (old default)
; Set to 0 to force off
; Default is 2: autodetect based on Windows setting

RezTimer=1
;RezTimer=0 ; orig
; Set to 1 to move the window only when the timestamp of
; a mouse event is different from the previous one, every 16ms
; more or less. MoveRate and ResizeRate and RefreshRate
; will have no effect if the option is enabled.
; This is overall the option that gives the best performances.
; It can be combined with FullWin=0 mode for ~0% CPU usage.

RefreshRate=0
; Minimum delay, in milliseconds, between two refreshes of a window.
; For minimum CPU usage use a value around your monitor's rate:
; 75Hz monitor => RefreshRate=13
; Max value is 255 (4 Hz), sane values are below 100 (10 Hz).
; If set to 0 (default), you get the most reactivity.

;MoveRate=1
;ResizeRate=1
MoveRate=2 ; orig
ResizeRate=4 ; orig
; The number of pixels to wait before actually moving the window.
; If set to 1, updates will be instant. You will have better perf with
; higher values but you will lose precision in moving/resizing.
; Sane values are below 10. Recommended is 1 to 5
[Input]
LMB=Move
MMB=Close
RMB=Resize
MB4=Lower
MB5=Nothing
Scroll=Nothing
HScroll=Nothing
TTBActions=0
LongClickMove=0
Hotclicks=