From 8d6b04384b3d59b251cc59a9a03a2c19b54281ce Mon Sep 17 00:00:00 2001 From: Mikkel Schmidt Date: Mon, 8 Jan 2024 13:13:57 +0100 Subject: [PATCH] Docs: add warning about octopus pro h723 v1.0 --- site/docs/boards/btt/octopus-pro-h723.md | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/site/docs/boards/btt/octopus-pro-h723.md b/site/docs/boards/btt/octopus-pro-h723.md index 4c0c4f74c..11ac38ffe 100644 --- a/site/docs/boards/btt/octopus-pro-h723.md +++ b/site/docs/boards/btt/octopus-pro-h723.md @@ -4,6 +4,13 @@ sidebar_label: Octopus Pro h723 # BIGTREETECH Octopus Pro STM32H723 +:::danger V1.0 of this board can be dangerous +When this board boots into DFU mode (which happens during firmware updates), the heater pins on HE0 and HE2 will be set to high, meaning your hotend will heat up for the duration of the firmware update process. +For this reason automatic firmware updates is disabled by default for the Octopus Pro H723 v1.0 boards in RatOS. You'll have to flash it through the [RatOS Configurator](http://RatOS.local/configure?step=2) when needed, +and monitor it closely, preferably disconnect the heater from the board. +See the [Octopus Pro readme]() +::: + ## Wiring ![BTT Octopus Pro STM32H723 Wiring Diagram](_media/octopus-pro-wiring.png)