Apple homekit app

[andrealm10]

Hello, this is a problem I have had for a very long time. When I add a relay I can set up the Wifi and connect to the manger. But when I go to the Homekit app on iPhone and try to add a new device it never shows up! I have tried many different relays and Wifi boards. I had a break for 6 month because it was so annoying and now I was gonna try again.
![Screenshot 2024-06-14 at 21 54 43](https://github.com/Raven

System/esp-homekit-devices/assets/141873518/182814ba-0859-4e5d-8608-b22e713ad478)

[andrealm10]

[andrealm10]

[tsgxwolf]

Seems you did not connect the WIFI.Try to Enter the wifi ssid manually.And do not choose “Reset the homekit ID”

[andrealm10]

Hello, thank you for the reply.
This picture just didn't show with when Wifi was entered. I have tried many many times with wifi and “Reset the homekit ID” not selected. The problem is that the device will not show up in the Apple Home app. I don't know what is blocking it and/or making it never showing up.
// André

[tsgxwolf]

so,if you connected a 2.4g wifi,and the dhcp setting is correct,then you need to confirm if the MEPLHAA Script is correct.Your pic shows the device name HAA-163A97-setup，it usualy happens when the script is not working,and the device will enter the setup mode

[shengweitw]

If it is a new device, please wait a little longer, sometimes 10 minutes, but it may also take half an hour. If it is an old setting, you must Reset Homekit ID.