forked from LHardwick-git/Victron-Service
-
Notifications
You must be signed in to change notification settings - Fork 8
/
i2c.py
executable file
·100 lines (82 loc) · 2.93 KB
/
i2c.py
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
#!/usr/bin/python
# Thie file can be extended to add class drivers for additional devices as they are implemented and tested
# https://github.com/Gozem/am2320/blob/master/am2320.py
# file has been updated to catch and report errors (rather than raising and exception
# use i2cdetect -y 1 on venus Rpi to check the device is found at address 5c
import posix
from fcntl import ioctl
import time
class AM2320:
I2C_ADDR = 0x5c
I2C_SLAVE = 0x0703
def __init__(self, i2cbus = 1):
self._i2cbus = i2cbus
@staticmethod
def _calc_crc16(data):
crc = 0xFFFF
for x in data:
crc = crc ^ x
for bit in range(0, 8):
if (crc & 0x0001) == 0x0001:
crc >>= 1
crc ^= 0xA001
else:
crc >>= 1
return crc
@staticmethod
def _combine_bytes(msb, lsb):
return msb << 8 | lsb
def readSensor(self):
fd = posix.open("/dev/i2c-%d" % self._i2cbus, posix.O_RDWR)
ioctl(fd, self.I2C_SLAVE, self.I2C_ADDR)
# wake AM2320 up, goes to sleep to not warm up and affect the humidity sensor
# This write will fail as AM2320 won't ACK this write
try:
posix.write(fd, b'\0x00')
except:
pass
time.sleep(0.001) #Wait at least 0.8ms, at most 3ms
# write at addr 0x03, start reg = 0x00, num regs = 0x04 */
try:
posix.write(fd, b'\x03\x00\x04')
except:
posix.close(fd)
return (0,0,1,"Device did not acknowledge request")
time.sleep(0.0016) #Wait at least 1.5ms for result
# Read out 8 bytes of result data
# Byte 0: Should be Modbus function code 0x03
# Byte 1: Should be number of registers to read (0x04)
# Byte 2: Humidity msb
# Byte 3: Humidity lsb
# Byte 4: Temperature msb
# Byte 5: Temperature lsb
# Byte 6: CRC lsb byte
# Byte 7: CRC msb byte
data = bytearray(posix.read(fd, 8))
posix.close(fd)
# Check data[0] and data[1]
if data[0] != 0x03 or data[1] != 0x04:
return (0,0,4,"First two read bytes are a mismatch")
# raise Exception("First two read bytes are a mismatch")
# CRC check
if self._calc_crc16(data[0:6]) != self._combine_bytes(data[7], data[6]):
return (0,0,4,"CRC failed")
# raise Exception("CRC failed")
# Temperature resolution is 16Bit,
# temperature highest bit (Bit15) is equal to 1 indicates a
# negative temperature, the temperature highest bit (Bit15)
# is equal to 0 indicates a positive temperature;
# temperature in addition to the most significant bit (Bit14 ~ Bit0)
# indicates the temperature sensor string value.
# Temperature sensor value is a string of 10 times the
# actual temperature value.
temp = self._combine_bytes(data[4], data[5])
if temp & 0x8000:
temp = -(temp & 0x7FFF)
temp /= 10.0
humi = self._combine_bytes(data[2], data[3]) / 10.0
return (temp, humi, 0,'')
#am2320 = AM2320(1)
#(t,h) = am2320.readSensor()
#print 'temperature', t
#print 'humidiy', h, ' %'