diff --git a/CHANGELOG.md b/CHANGELOG.md
index 93d4396..643a81e 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -6,6 +6,11 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/)
 and this project adheres to [Semantic Versioning](http://semver.org/).
 
 
+## [0.4.1] - 2023-11-25
+- fix **reset()**: clear state of resolution, heater and error
+- update readme.md
+- minor edits
+
 ## [0.4.0] - 2023-09-21
 - moved TwoWire param from begin() to Constructor
 - FIx #23 support for Wire1 for ESP32
diff --git a/README.md b/README.md
index cca9278..5d91214 100644
--- a/README.md
+++ b/README.md
@@ -26,9 +26,9 @@ Accuracy table
 
 |  Sensor   | Temperature | Humidity |  Notes  |
 |:---------:|:-----------:|:--------:|:--------|
-|  SHT20    |   ~0.3      |  ±3.0    |         |
-|  SHT21    |   ~0.3      |  ±3.0    |         |
-|  SHT25    |   ~0.3      |  ±1.8    |         |
+|  SHT20    |   ~0.3      |  ±3.0    |         |
+|  SHT21    |   ~0.3      |  ±3.0    |         |
+|  SHT25    |   ~0.3      |  ±1.8    |         |
 |  HTU20    |             |          |  to-do  |
 |  HTU21    |             |          |  to-do  |
 |  Si7013   |             |          |  to-do  |
@@ -83,7 +83,7 @@ Initial release has a blocking delay.
 - **uint32_t lastRead()** in milliSeconds since start of program.
 - **bool reset()** resets the sensor, soft reset, no hard reset supported.
 - **float getHumidity()** computes the relative humidity in % based off the latest raw reading, and returns it.
-- **float getTemperature()** computes the temperature in °C based off the latest raw reading, and returns it.
+- **float getTemperature()** computes the temperature in °C based off the latest raw reading, and returns it.
 - **uint16_t getRawHumidity()** returns the raw two-byte representation of humidity directly from the sensor.
 - **uint16_t getRawTemperature()** returns the raw two-byte representation of temperature directly from the sensor.
 
@@ -244,6 +244,9 @@ Timing in milliseconds.
 - investigate blocking delay() in read 
 - add offset for temperature and humidity
 
+#### 0.4.1
+- fix reset(): clear state of resolution, heater and error
+
 #### Should
 
 - test test test
diff --git a/SHT2x.cpp b/SHT2x.cpp
index ce857ba..5b31771 100644
--- a/SHT2x.cpp
+++ b/SHT2x.cpp
@@ -1,8 +1,8 @@
 //
 //    FILE: SHT2x.cpp
-//  AUTHOR: Rob Tillaart, Viktor Balint
-// VERSION: 0.4.0
-//    DATE: 2021-09-25
+//  AUTHOR: Rob Tillaart, Viktor Balint, JensB
+// VERSION: 0.4.1
+//    DATE: 2023-11-25
 // PURPOSE: Arduino library for the SHT2x temperature and humidity sensor
 //     URL: https://github.com/RobTillaart/SHT2x
 
@@ -11,20 +11,20 @@
 
 
 //  SUPPORTED COMMANDS
-#define SHT2x_GET_TEMPERATURE_NO_HOLD   0xF3
-#define SHT2x_GET_HUMIDITY_NO_HOLD      0xF5
-#define SHT2x_SOFT_RESET                0xFE
-#define SHT2x_WRITE_USER_REGISTER       0xE6
-#define SHT2x_READ_USER_REGISTER        0xE7
+#define SHT2x_GET_TEMPERATURE_NO_HOLD      0xF3
+#define SHT2x_GET_HUMIDITY_NO_HOLD         0xF5
+#define SHT2x_SOFT_RESET                   0xFE
+#define SHT2x_WRITE_USER_REGISTER          0xE6
+#define SHT2x_READ_USER_REGISTER           0xE7
 
-#define SHT2x_HEATER_TIMEOUT            180000UL  //  milliseconds
+#define SHT2x_HEATER_TIMEOUT               180000UL  //  milliseconds
 
-#define SHT2x_ADDRESS                   0x40
+#define SHT2x_ADDRESS                      0x40
 
 
-#define SHT2x_USRREG_RESOLUTION         0x81
-#define SHT2x_USRREG_BATTERY            0x20
-#define SHT2x_USRREG_HEATER             0x04
+#define SHT2x_USRREG_RESOLUTION            0x81
+#define SHT2x_USRREG_BATTERY               0x20
+#define SHT2x_USRREG_HEATER                0x04
 
 
 //////////////////////////////////////////////////////////////
@@ -273,8 +273,14 @@ uint16_t SHT2x::getRawHumidity()
 
 bool SHT2x::reset()
 {
-  bool b = writeCmd(SHT2x_SOFT_RESET);
-  return b;
+  bool success = writeCmd(SHT2x_SOFT_RESET);
+  if (success)
+  {
+    _resolution = 0;
+    _heaterOn = false;
+    _error = SHT2x_OK;
+  }
+  return success;
 }
 
 
diff --git a/SHT2x.h b/SHT2x.h
index 94265d7..6215530 100644
--- a/SHT2x.h
+++ b/SHT2x.h
@@ -1,9 +1,9 @@
 #pragma once
 //
 //    FILE: SHT2x.h
-//  AUTHOR: Rob Tillaart, Viktor Balint
-// VERSION: 0.4.0
-//    DATE: 2021-09-25
+//  AUTHOR: Rob Tillaart, Viktor Balint, JensB
+// VERSION: 0.4.1
+//    DATE: 2023-11-25
 // PURPOSE: Arduino library for the SHT2x temperature and humidity sensor
 //     URL: https://github.com/RobTillaart/SHT2x
 //
@@ -13,7 +13,7 @@
 #include "Wire.h"
 
 
-#define SHT2x_LIB_VERSION             (F("0.4.0"))
+#define SHT2x_LIB_VERSION             (F("0.4.1"))
 
 
 //  fields getStatus
@@ -63,7 +63,7 @@ class SHT2x
   //
   //  TEMPERATURE AND HUMIDTY
   //
-  //  read must be called get getTemperature / getHumidity
+  //  read must be called before calling getTemperature / getHumidity
   bool     read();
 
   float    getTemperature();
diff --git a/library.json b/library.json
index 535d3d8..9843e70 100644
--- a/library.json
+++ b/library.json
@@ -11,6 +11,9 @@
     },
     {
       "name": "Viktor Balint"
+    },
+    {
+      "name": "JensB"
     }
   ],
   "repository":
@@ -18,7 +21,7 @@
     "type": "git",
     "url": "https://github.com/RobTillaart/SHT2x.git"
   },
-  "version": "0.4.0",
+  "version": "0.4.1",
   "license": "MIT",
   "frameworks": "*",
   "platforms": "*",
diff --git a/library.properties b/library.properties
index ec2f29c..246da4a 100644
--- a/library.properties
+++ b/library.properties
@@ -1,5 +1,5 @@
 name=SHT2x
-version=0.4.0
+version=0.4.1
 author=Rob Tillaart <rob.tillaart@gmail.com>
 maintainer=Rob Tillaart <rob.tillaart@gmail.com>
 sentence=Arduino library for the I2C SHT20 SHT21 SHT25 series temperature and humidity sensor.