stm32n6570_discovery_sd.c

/**
  ******************************************************************************
  * @file    stm32n6570_discovery_sd.c
  * @author  MCD Application Team
  * @brief   This file includes the uSD card driver mounted on STM32N6570_DK
  *          boards.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2023 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  @verbatim
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
   - This driver is used to drive the micro SD external card mounted on the
     STM32N6570_DK board.
   - This driver does not need a specific component driver for the micro SD device
     to be included with.

  Driver description:
  ------------------
  + Initialization steps:
     o Initialize the micro SD card using the BSP_SD_Init() function. This
       function includes the MSP layer hardware resources initialization and the
       SDIO interface configuration to interface with the external micro SD. It
       also includes the micro SD initialization sequence for instance 0.

     o To check the SD card presence you can use the function BSP_SD_IsDetected() which
       returns the detection status for instance 0.

     o If SD presence detection interrupt mode is desired, you must configure the
       SD detection interrupt mode by calling the function BSP_SD_DetectITConfig().
       The interrupt is generated as an external interrupt whenever the micro SD card is
       plugged/unplugged in/from the discovery board.
     The SD detection interrupt is handled by calling the function BSP_SD_DetectIT()
       which is called in the IRQ handler file, the user callback is implemented in
     the function BSP_SD_DetectCallback().

     o The function BSP_SD_GetCardInfo()are used to get the micro SD card information
       which is stored in the structure "HAL_SD_CardInfoTypedef".

  + Micro SD card operations
     o The micro SD card can be accessed with read/write block(s) operations once
       it is ready for access. The access can be performed whether
       using the polling mode by calling the functions BSP_SD_ReadBlocks()/BSP_SD_WriteBlocks(),
       using the interrupt mode by calling the functions BSP_SD_ReadBlocks_IT()/BSP_SD_WriteBlocks_IT(),
       or by DMA transfer using the functions BSP_SD_ReadBlocks_DMA()/BSP_SD_WriteBlocks_DMA().
       The access can be performed to instance 0.

     o The DMA transfer complete is used with interrupt mode. Once the SD transfer
       is complete, the SD interrupt is handled using the function BSP_SD_IRQHandler()
       when instance 0 is used.
       The DMA Tx/Rx transfer complete are handled using the functions
       SD_SDMMC1_DMA_Tx_IRQHandler(), SD_SDMMC1_DMA_Rx_IRQHandler(). The corresponding
       user callbacks are implemented by the user at application level.

     o The SD erase block(s) is performed using the functions BSP_SD_Erase() with specifying
       the number of blocks to erase.

     o The SD runtime status is returned when calling the function BSP_SD_GetCardState().

  @endverbatim
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32n6570_discovery_sd.h"

/** @addtogroup BSP
  * @{
  */

/** @addtogroup STM32N6570_DK
  * @{
  */

/** @defgroup STM32N6570_DK_SD SD
  * @{
  */

/** @defgroup STM32N6570_DK_SD_Private_TypesDefinitions SD Private TypesDefinitions
  * @{
  */
#if (USE_HAL_SD_REGISTER_CALLBACKS > 0)
/* Is Msp Callbacks registered */
static uint32_t   IsMspCallbacksValid[SD_INSTANCES_NBR] = {0};
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
typedef void (*BSP_SD_EXTI_LineCallback)(void);
/**
  * @}
  */

/** @defgroup STM32N6570_DK_SD_Exported_Variables SD Exported Variables
  * @{
  */
SD_HandleTypeDef        hsd_sdmmc[SD_INSTANCES_NBR];
EXTI_HandleTypeDef      hsd_exti[SD_INSTANCES_NBR];
/**
  * @}
  */

/** @defgroup STM32N6570_DK_SD_Private_Variables SD Private Variables
  * @{
  */
static uint32_t     PinDetect[SD_INSTANCES_NBR]  = {SD_DETECT_PIN};
static GPIO_TypeDef *SD_GPIO_PORT[SD_INSTANCES_NBR] = {SD_DETECT_GPIO_PORT};
/**
  * @}
  */

/** @defgroup STM32N6570_DK_SD_Private_Functions_Prototypes SD Private Functions Prototypes
  * @{
  */
static void SD_MspInit(SD_HandleTypeDef *hsd);
static void SD_MspDeInit(SD_HandleTypeDef *hsd);
#if (USE_HAL_SD_REGISTER_CALLBACKS > 0)
static void SD_AbortCallback(SD_HandleTypeDef *hsd);
static void SD_TxCpltCallback(SD_HandleTypeDef *hsd);
static void SD_RxCpltCallback(SD_HandleTypeDef *hsd);
#endif /* (USE_HAL_SD_REGISTER_CALLBACKS > 0) */
static void SD_EXTI_Callback(void);
/**
  * @}
  */

/** @defgroup STM32N6570_DK_SD_Exported_Functions SD Exported Functions
  * @{
  */

/**
  * @brief  Initializes the SD card device.
  * @param  Instance      SD Instance
  * @retval BSP status
  */
int32_t BSP_SD_Init(uint32_t Instance)
{
  int32_t ret = BSP_ERROR_NONE;
  GPIO_InitTypeDef gpio_init_structure;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {


  /* SDMMC1 FPGA activation  and security configuration */
  {
    uint32_t RIFSCAddress1 = 0x54024C18; /*  (RIFSC_RIMC_ATTRx) with x = 2 (0x8 :Master index of SDMMC1) */
    uint32_t RIFSCAddress2 = 0x54024C1C; /*  (RIFSC_RIMC_ATTRx) with x = 4 (0xC:Master index of SDMMC2) */

    uint32_t data;
    /*SDMMC1*/
     /* set MPRIV, MSEC and MCID=001 (same CID as CPU) */
     *(uint32_t*)RIFSCAddress1 = 0x00000310;
     /* readback data */
     data = *(uint32_t*)RIFSCAddress1 ;
     (void)data;

     /* Lines below are useful only for DMA transfer */
     /* SDMMC1 Secure Guard RISUP Index is 53 */
     RIFSCAddress1 = 0x54024014; /* RIFSC_RISC_SECCFGRx with x = 1 */
     data = *(uint32_t*)RIFSCAddress1 ;
     *(uint32_t*)RIFSCAddress1 = data | 0x00200000U;
     /* readback data */
     data = *(uint32_t*)RIFSCAddress1 ;
     (void)data;

    /*SDMMC2*/
     /* set MPRIV, MSEC and MCID=001 (same CID as CPU) */
     *(uint32_t*)RIFSCAddress2 = 0x00000310;
     /* readback data */
     data = *(uint32_t*)RIFSCAddress2 ;
     (void)data;

     /* Lines below are useful only for DMA transfer */
     /* SDMMC1 Secure Guard RISUP Index is 54 */
     RIFSCAddress2 = 0x54024014; /* RIFSC_RISC_SECCFGRx with x = 1 */
     data = *(uint32_t*)RIFSCAddress2 ;
     *(uint32_t*)RIFSCAddress2 = data | 0x00400000U;
     /* readback data */
     data = *(uint32_t*)RIFSCAddress2 ;
     (void)data;


  }

    /* GPIO Detect pin configuration */
    SD_DETECT_GPIO_CLK_ENABLE();

    /* Configure Interrupt mode for SD detection pin */
    gpio_init_structure.Pin     = PinDetect[Instance];
    gpio_init_structure.Pull    = GPIO_NOPULL;
    gpio_init_structure.Speed   = GPIO_SPEED_FREQ_HIGH;
    gpio_init_structure.Mode    = GPIO_MODE_INPUT;
    HAL_GPIO_Init(SD_GPIO_PORT[Instance], &gpio_init_structure);

    /* Check if SD card is present */
    if ((uint32_t)BSP_SD_IsDetected(Instance) != SD_PRESENT)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
#if (USE_HAL_SD_REGISTER_CALLBACKS == 0)
      /* Msp SD initialization */
      SD_MspInit(&hsd_sdmmc[Instance]);
#else
      /* Register the SD MSP Callbacks */
      if (IsMspCallbacksValid[Instance] == 0UL)
      {
        if (BSP_SD_RegisterDefaultMspCallbacks(Instance) != BSP_ERROR_NONE)
        {
          ret = BSP_ERROR_PERIPH_FAILURE;
        }
      }
      if (ret == BSP_ERROR_NONE)
      {
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */

      /* HAL SD initialization and Enable wide operation */
      if (MX_SDMMC1_SD_Init(&hsd_sdmmc[Instance]) != HAL_OK)
      {
        ret = BSP_ERROR_PERIPH_FAILURE;
      }
      else if (HAL_SD_ConfigWideBusOperation(&hsd_sdmmc[Instance], SDMMC_BUS_WIDE_4B) != HAL_OK)
      {
        ret = BSP_ERROR_PERIPH_FAILURE;
      }
      else
      {
        /* Try to switch to High Speed mode if the card supports this mode */
        (void)HAL_SD_ConfigSpeedBusOperation(&hsd_sdmmc[Instance], SDMMC_SPEED_MODE_HIGH);

#if (USE_HAL_SD_REGISTER_CALLBACKS > 0)
        /* Register SD TC, HT and Abort callbacks */
        if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_TX_CPLT_CB_ID, SD_TxCpltCallback) != HAL_OK)
        {
          ret = BSP_ERROR_PERIPH_FAILURE;
        }
        else if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_RX_CPLT_CB_ID, SD_RxCpltCallback) != HAL_OK)
        {
          ret = BSP_ERROR_PERIPH_FAILURE;
        }
        else
        {
          if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_ABORT_CB_ID, SD_AbortCallback) != HAL_OK)
          {
            ret = BSP_ERROR_PERIPH_FAILURE;
          }
        }
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
      }
#if (USE_HAL_SD_REGISTER_CALLBACKS > 0)
    }
#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
  }
}

return ret;
}

/**
  * @brief  DeInitializes the SD card device.
  * @param Instance      SD Instance
  * @retval SD status
  */
int32_t BSP_SD_DeInit(uint32_t Instance)
{
  int32_t ret = BSP_ERROR_NONE;
  GPIO_InitTypeDef gpio_init_structure;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    if (HAL_EXTI_ClearConfigLine(&hsd_exti[Instance]) != HAL_OK)
    {
      return BSP_ERROR_PERIPH_FAILURE;
    }

    /* Configure Detect pins in input floating mode */
    gpio_init_structure.Pin = PinDetect[Instance];
    HAL_GPIO_DeInit(SD_GPIO_PORT[Instance], gpio_init_structure.Pin);

    /* HAL SD de-initialization */
    if (HAL_SD_DeInit(&hsd_sdmmc[Instance]) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
      /* Msp SD de-initialization */
#if (USE_HAL_SD_REGISTER_CALLBACKS == 0)
      SD_MspDeInit(&hsd_sdmmc[Instance]);
#endif /* (USE_HAL_SD_REGISTER_CALLBACKS == 0) */
    }
  }
  return ret;
}

/**
  * @brief  Initializes the SDMMC1 peripheral.
  * @param  hsd SD handle
  * @retval HAL status
  */
__weak HAL_StatusTypeDef MX_SDMMC1_SD_Init(SD_HandleTypeDef *hsd)
{
  HAL_StatusTypeDef ret = HAL_OK;
  /* uSD device interface configuration */
  hsd->Instance                 = SDMMC2;
  hsd->Init.ClockEdge           = SDMMC_CLOCK_EDGE_RISING;
  hsd->Init.ClockPowerSave      = SDMMC_CLOCK_POWER_SAVE_DISABLE;
  hsd->Init.BusWide             = SDMMC_BUS_WIDE_1B;
  hsd->Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
  hsd->Init.ClockDiv            = SDMMC_NSpeed_CLK_DIV;

  /* HAL SD initialization */
  if (HAL_SD_Init(hsd) != HAL_OK)
  {
    ret = HAL_ERROR;
  }
  return ret;
}

#if (USE_HAL_SD_REGISTER_CALLBACKS > 0)
/**
  * @brief Default BSP SD Msp Callbacks
  * @param Instance      SD Instance
  * @retval BSP status
  */
int32_t BSP_SD_RegisterDefaultMspCallbacks(uint32_t Instance)
{
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    /* Register MspInit/MspDeInit Callbacks */
    if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_MSP_INIT_CB_ID, SD_MspInit) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_MSP_DEINIT_CB_ID, SD_MspDeInit) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
      IsMspCallbacksValid[Instance] = 1U;
    }
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief BSP SD Msp Callback registering
  * @param Instance     SD Instance
  * @param CallBacks    pointer to MspInit/MspDeInit callbacks functions
  * @retval BSP status
  */
int32_t BSP_SD_RegisterMspCallbacks(uint32_t Instance, BSP_SD_Cb_t *CallBacks)
{
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    /* Register MspInit/MspDeInit Callbacks */
    if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_MSP_INIT_CB_ID, CallBacks->pMspInitCb) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else if (HAL_SD_RegisterCallback(&hsd_sdmmc[Instance], HAL_SD_MSP_DEINIT_CB_ID, CallBacks->pMspDeInitCb) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
      IsMspCallbacksValid[Instance] = 1U;
    }
  }
  /* Return BSP status */
  return ret;
}
#endif /* (USE_HAL_SD_REGISTER_CALLBACKS > 0) */

/**
  * @brief  Configures Interrupt mode for SD detection pin.
  * @param  Instance      SD Instance
  * @retval Returns 0
  */
int32_t BSP_SD_DetectITConfig(uint32_t Instance)
{
  int32_t ret;
  GPIO_InitTypeDef gpio_init_structure;
  static BSP_SD_EXTI_LineCallback SdCallback[SD_INSTANCES_NBR] = {SD_EXTI_Callback};
  static IRQn_Type SD_EXTI_IRQn[SD_INSTANCES_NBR] = {SD_DETECT_EXTI_IRQn};

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    SD_DETECT_GPIO_CLK_ENABLE();
    HAL_PWREx_EnableVddIO3();

    /* Configure Interrupt mode for SD detection pin */
    gpio_init_structure.Pin     = PinDetect[Instance];
    gpio_init_structure.Pull    = GPIO_NOPULL;
    gpio_init_structure.Speed   = GPIO_SPEED_FREQ_VERY_HIGH;
    gpio_init_structure.Mode    = GPIO_MODE_IT_RISING_FALLING;
    HAL_GPIO_Init(SD_GPIO_PORT[Instance], &gpio_init_structure);

    if (HAL_EXTI_GetHandle(&hsd_exti[Instance], SD_DETECT_EXTI_LINE) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else if (HAL_EXTI_RegisterCallback(&hsd_exti[Instance],  HAL_EXTI_COMMON_CB_ID, SdCallback[Instance]) != HAL_OK)
    {
      ret = BSP_ERROR_PERIPH_FAILURE;
    }
    else
    {
      /* Enable and set Button EXTI Interrupt to the lowest priority */
      HAL_NVIC_SetPriority(SD_EXTI_IRQn[Instance], BSP_SD_IT_PRIORITY, 0x00);
      HAL_NVIC_EnableIRQ(SD_EXTI_IRQn[Instance]);
      ret = BSP_ERROR_NONE;
    }
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief  BSP SD Callback.
  * @param  Instance SD Instance
  * @param  Status   Pin status
  * @retval None.
  */
__weak void BSP_SD_DetectCallback(uint32_t Instance, uint32_t Status)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(Instance);
  UNUSED(Status);

  /* This function should be implemented by the user application.
     It is called into this driver when an event on JoyPin is triggered. */
}

/**
  * @brief  Detects if SD card is correctly plugged in the memory slot or not.
  * @param  Instance  SD Instance
  * @retval Returns if SD is detected or not
  */
int32_t BSP_SD_IsDetected(uint32_t Instance)
{
  uint32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    return BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    /* Check SD card detect pin */
    if (HAL_GPIO_ReadPin(SD_GPIO_PORT[Instance], (uint16_t)PinDetect[Instance]) == GPIO_PIN_SET)
    {
      ret = SD_NOT_PRESENT;
    }
    else
    {
      ret = SD_PRESENT;
    }
  }

  return (int32_t)ret;
}

/**
  * @brief  Reads block(s) from a specified address in an SD card, in polling mode.
  * @param  Instance   SD Instance
  * @param  pData      Pointer to the buffer that will contain the data to transmit
  * @param  BlockIdx   Block index from where data is to be read
  * @param  BlocksNbr  Number of SD blocks to read
  * @retval BSP status
  */
int32_t BSP_SD_ReadBlocks(uint32_t Instance, uint32_t *pData, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  uint32_t timeout = SD_READ_TIMEOUT * BlocksNbr;
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_ReadBlocks(&hsd_sdmmc[Instance], (uint8_t *)pData, BlockIdx, BlocksNbr, timeout) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }

  /* Return BSP status */
  return ret;
}

/**
  * @brief  Writes block(s) to a specified address in an SD card, in polling mode.
  * @param  Instance   SD Instance
  * @param  pData      Pointer to the buffer that will contain the data to transmit
  * @param  BlockIdx   Block index from where data is to be written
  * @param  BlocksNbr  Number of SD blocks to write
  * @retval BSP status
  */
int32_t BSP_SD_WriteBlocks(uint32_t Instance, uint32_t *pData, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  uint32_t timeout = SD_READ_TIMEOUT * BlocksNbr;
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_WriteBlocks(&hsd_sdmmc[Instance], (uint8_t *)pData, BlockIdx, BlocksNbr, timeout) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief  Reads block(s) from a specified address in an SD card, in DMA mode.
  * @param  Instance   SD Instance
  * @param  pData      Pointer to the buffer that will contain the data to transmit
  * @param  BlockIdx   Block index from where data is to be read
  * @param  BlocksNbr  Number of SD blocks to read
  * @retval BSP status
  */
int32_t BSP_SD_ReadBlocks_DMA(uint32_t Instance, uint32_t *pData, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_ReadBlocks_DMA(&hsd_sdmmc[Instance], (uint8_t *)pData, BlockIdx, BlocksNbr) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief  Writes block(s) to a specified address in an SD card, in DMA mode.
  * @param  Instance   SD Instance
  * @param  pData      Pointer to the buffer that will contain the data to transmit
  * @param  BlockIdx   Block index from where data is to be written
  * @param  BlocksNbr  Number of SD blocks to write
  * @retval BSP status
  */
int32_t BSP_SD_WriteBlocks_DMA(uint32_t Instance, uint32_t *pData, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_WriteBlocks_DMA(&hsd_sdmmc[Instance], (uint8_t *)pData, BlockIdx, BlocksNbr) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief  Reads block(s) from a specified address in an SD card, in DMA mode.
  * @param  Instance   SD Instance
  * @param  pData      Pointer to the buffer that will contain the data to transmit
  * @param  BlockIdx   Block index from where data is to be read
  * @param  BlocksNbr  Number of SD blocks to read
  * @retval SD status
  */
int32_t BSP_SD_ReadBlocks_IT(uint32_t Instance, uint32_t *pData, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_ReadBlocks_IT(&hsd_sdmmc[Instance], (uint8_t *)pData, BlockIdx, BlocksNbr) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief  Writes block(s) to a specified address in an SD card, in DMA mode.
  * @param  Instance   SD Instance
  * @param  pData      Pointer to the buffer that will contain the data to transmit
  * @param  BlockIdx   Block index from where data is to be written
  * @param  BlocksNbr  Number of SD blocks to write
  * @retval SD status
  */
int32_t BSP_SD_WriteBlocks_IT(uint32_t Instance, uint32_t *pData, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_WriteBlocks_IT(&hsd_sdmmc[Instance], (uint8_t *)pData, BlockIdx, BlocksNbr) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}


/**
  * @brief  Erases the specified memory area of the given SD card.
  * @param  Instance   SD Instance
  * @param  BlockIdx   Block index from where data is to be
  * @param  BlocksNbr  Number of SD blocks to erase
  * @retval SD status
  */
int32_t BSP_SD_Erase(uint32_t Instance, uint32_t BlockIdx, uint32_t BlocksNbr)
{
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_Erase(&hsd_sdmmc[Instance], BlockIdx, BlockIdx + BlocksNbr) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}

/**
  * @brief  Gets the current SD card data status.
  * @param  Instance  SD Instance
  * @retval Data transfer state.
  *          This value can be one of the following values:
  *            @arg  SD_TRANSFER_OK: No data transfer is acting
  *            @arg  SD_TRANSFER_BUSY: Data transfer is acting
  */
int32_t BSP_SD_GetCardState(uint32_t Instance)
{
  return (int32_t)((HAL_SD_GetCardState(&hsd_sdmmc[Instance]) == HAL_SD_CARD_TRANSFER) ? SD_TRANSFER_OK
                   : SD_TRANSFER_BUSY);
}

/**
  * @brief  Get SD information about specific SD card.
  * @param  Instance  SD Instance
  * @param  CardInfo  Pointer to HAL_SD_CardInfoTypedef structure
  * @retval BSP status
  */
int32_t BSP_SD_GetCardInfo(uint32_t Instance, BSP_SD_CardInfo *CardInfo)
{
  int32_t ret;

  if (Instance >= SD_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else if (HAL_SD_GetCardInfo(&hsd_sdmmc[Instance], CardInfo) != HAL_OK)
  {
    ret = BSP_ERROR_PERIPH_FAILURE;
  }
  else
  {
    ret = BSP_ERROR_NONE;
  }
  /* Return BSP status */
  return ret;
}

#if (USE_HAL_SD_REGISTER_CALLBACKS == 0) || !defined(USE_HAL_SD_REGISTER_CALLBACKS)
/**
  * @brief SD Abort callbacks
  * @param hsd  SD handle
  * @retval None
  */
void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd)
{
  BSP_SD_AbortCallback((hsd == &hsd_sdmmc[0]) ? 0UL : 1UL);
}

/**
  * @brief Tx Transfer completed callbacks
  * @param hsd  SD handle
  * @retval None
  */
void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd)
{
  BSP_SD_WriteCpltCallback((hsd == &hsd_sdmmc[0]) ? 0UL : 1UL);
}

/**
  * @brief Rx Transfer completed callbacks
  * @param hsd  SD handle
  * @retval None
  */
void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd)
{
  BSP_SD_ReadCpltCallback((hsd == &hsd_sdmmc[0]) ? 0UL : 1UL);
}
#endif /* (USE_HAL_SD_REGISTER_CALLBACKS == 0) */

/**
  * @brief  This function handles EXTI_LINE_10 for SD1 interrupt request.
  * @param  Instance SD Instance
  * @retval None
  */
void BSP_SD_DETECT_IRQHandler(uint32_t Instance)
{
  HAL_EXTI_IRQHandler(&hsd_exti[Instance]);
}

/**
  * @brief  This function handles SDMMC interrupt requests.
  * @param  Instance  SD Instance
  * @retval None
  */
void BSP_SD_IRQHandler(uint32_t Instance)
{
  HAL_SD_IRQHandler(&hsd_sdmmc[Instance]);
}

/**
  * @brief BSP SD Abort callbacks
  * @param  Instance     SD Instance
  * @retval None
  */
__weak void BSP_SD_AbortCallback(uint32_t Instance)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(Instance);
}

/**
  * @brief BSP Tx Transfer completed callbacks
  * @param  Instance     SD Instance
  * @retval None
  */
__weak void BSP_SD_WriteCpltCallback(uint32_t Instance)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(Instance);
}

/**
  * @brief BSP Rx Transfer completed callbacks
  * @param  Instance     SD Instance
  * @retval None
  */
__weak void BSP_SD_ReadCpltCallback(uint32_t Instance)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(Instance);
}

/**
  * @}
  */

/** @defgroup STM32N6570_DK_SD_Private_Functions SD Private Functions
  * @{
  */
#if (USE_HAL_SD_REGISTER_CALLBACKS > 0)
/**
  * @brief SD Abort callbacks
  * @param hsd  SD handle
  * @retval None
  */
static void SD_AbortCallback(SD_HandleTypeDef *hsd)
{
  BSP_SD_AbortCallback((hsd == &hsd_sdmmc[0]) ? 0UL : 1UL);
}

/**
  * @brief Tx Transfer completed callbacks
  * @param hsd  SD handle
  * @retval None
  */
static void SD_TxCpltCallback(SD_HandleTypeDef *hsd)
{
  BSP_SD_WriteCpltCallback((hsd == &hsd_sdmmc[0]) ? 0UL : 1UL);
}

/**
  * @brief Rx Transfer completed callbacks
  * @param hsd  SD handle
  * @retval None
  */
static void SD_RxCpltCallback(SD_HandleTypeDef *hsd)
{
  BSP_SD_ReadCpltCallback((hsd == &hsd_sdmmc[0]) ? 0UL : 1UL);
}

#endif /* USE_HAL_SD_REGISTER_CALLBACKS > 0 */

/**
  * @brief  SD EXTI line detection callbacks.
  * @retval None
  */
static void SD_EXTI_Callback(void)
{
  uint32_t sd_status;

  if (HAL_GPIO_ReadPin(SD_GPIO_PORT[0], (uint16_t)PinDetect[0]) == GPIO_PIN_SET)
  {
    sd_status = SD_NOT_PRESENT;
  }
  else
  {
    sd_status = SD_PRESENT;
  }
  BSP_SD_DetectCallback(0, sd_status);
}

/**
  * @brief  Initializes the SD MSP.
  * @param  hsd  SD handle
  * @retval None
  */
static void SD_MspInit(SD_HandleTypeDef *hsd)
{
  GPIO_InitTypeDef gpio_init_structure = {0};

  if (hsd == &hsd_sdmmc[0])
  {

    HAL_PWREx_EnableVddIO5();
    /* Enable SDMMC clock */
    __HAL_RCC_SDMMC2_CLK_ENABLE();

    /* Enable GPIOs clock */
    __HAL_RCC_GPIOC_CLK_ENABLE();
    __HAL_RCC_GPIOE_CLK_ENABLE();

    /* Common GPIO configuration */
    gpio_init_structure.Mode      = GPIO_MODE_AF_PP;
    gpio_init_structure.Pull      = GPIO_PULLUP;
    gpio_init_structure.Speed     = GPIO_SPEED_FREQ_VERY_HIGH;
    gpio_init_structure.Alternate = GPIO_AF11_SDMMC2;

    /* D2-CLK-CMD-D0-D1*/
    gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4  | GPIO_PIN_5 ;
    HAL_GPIO_Init(GPIOC, &gpio_init_structure);

    /* D3*/
    gpio_init_structure.Pin = GPIO_PIN_4;
    HAL_GPIO_Init(GPIOE, &gpio_init_structure);

    /* NVIC configuration for SDMMC1 interrupts */
    HAL_NVIC_SetPriority(SDMMC2_IRQn, BSP_SD_IT_PRIORITY, 0);
    HAL_NVIC_EnableIRQ(SDMMC2_IRQn);
  }
}

/**
  * @brief  DeInitializes the SD MSP.
  * @param  hsd  SD handle
  * @retval None
  */
static void SD_MspDeInit(SD_HandleTypeDef *hsd)
{
  GPIO_InitTypeDef gpio_init_structure;

  if (hsd == &hsd_sdmmc[0])
  {
    /* Disable NVIC for SDIO interrupts */
    HAL_NVIC_DisableIRQ(SDMMC2_IRQn);

    /* GPIOC configuration */
    gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4  | GPIO_PIN_5 ;
    HAL_GPIO_DeInit(GPIOC, gpio_init_structure.Pin);

    /* GPIOD configuration */
    gpio_init_structure.Pin = GPIO_PIN_4;
    HAL_GPIO_DeInit(GPIOD, gpio_init_structure.Pin);

    /* Disable SDMMC1 clock */
    __HAL_RCC_SDMMC1_CLK_DISABLE();
  }
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */