- Added new board: unexpectedmaker_feathers2_neo
- fix updating issue with circuipython
- Update self-update as application
- Update IDF to v4.3
- Add new boards: muselab_nanoesp32_s2, atmegazero_esp32s2
- Fix esp32s2 request to uf2 using reset hint
- self-install tinyuf2 when FCFB not valid
- Use official nxp mcux-sdk submodule
- Refactor fsl_romapi
- Add support for on-chip flash (W25Q32JV) for rt1024 and rt1064
- Use official nxp mcux-sdk submodule
- Add support for multiple sectors per cluster in GhostFAT to enable larger flash sizes
- Add native test for ghostfat with varous checks
- Add new board API:
- board_reset()
- board_flash_erase_app()
- board_usb_init()
- board_uart_init()
- Add
erase_firmware
application target (only implemented for iMXRT for now).- TinyUF2 will erase whole flash if
MAGIC_ERASE_APP
is written by application. erase_firmware.uf2
is also uploaded as part of build/release asset if available
- TinyUF2 will erase whole flash if
- No major chagnes to LPC55, STM32 F3 F4
- Rework Dotstar driver
- Speed up flashing speed by increase cache size to 64KB and using block erase
- Add new boards:
- Adafruit Fun House
- Unexpected Maker TinyS2
- Always write tinyuf2 image to flash if loaded in Serial Donwload mode (Boot Mode = 01)
- Add
erase_firmware.uf2
to erase the whole flash except bootloader - Add sdphost binary for arm 32bit e.g raspberry pi 4
- Add
esp32programmer.uf2
app for selected board.
- Add compiled date to INFO_UF2.TXT
- Add new port STM32F3
- Add new boards: gravitech_cucumberRIS_v1.1, lilygo_ttgo_t8_s2_st7789, olimex_esp32s2_devkit_lipo_vB1, artisense_rd00
- Fix FCFB address on RT1060
- Use LPGPR for double tap detection instead of generic sram.
- Fix flash-pyocd for imxrt evk board.
- No major changes
- new port with stm32f303 discovery board
- No major changes
- Added stm32f401 blackpill
- Fix stm32f4 uart logging
update-*.uf2
is uploaded separately in release assests.
- Add new port for NXP LPC55xx.
- Rename
USE_
feature toTINYUF2_
- Add support for 1.14 ST7789 TFT
- New board: Adafruit Feather ESP32-S2 with and without TFT
- Enhance iMXRT port by running entire bootloader on SRAM. Also support bootROM Serial Download Mode (BOOT_MODE = 01).
- Add port's readme
- Support Neopixel, double reset, flashing.
- New boards: LPCXpresso 55s68 and 55s28, Steiert's Feather Double M33
- No major changes
- Initial release with support for ESP32-S2, iMXRT 10xx, STM32F4