-
Notifications
You must be signed in to change notification settings - Fork 12
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Support Raspberry Pi camera module V3 #71
Comments
This is the output from the serial console:
|
Hi @LynnL4! |
Hi @hatrinh-sj, sorry for the late response. We tested the IMX708 on our Grove Vision AI V2 and the firmware is consistent with From the logs you provided, it looks like the device's IIC is not interacting properly with the IMX708, please also double check that the camera connection is correct and reliable. Also, if you are using Chrome under Linux, you may not be able to establish a proper connection with the device under some Linux distributions, you can try https://github.com/Seeed-Studio/python-sscma or test under Windows. Hope this solves your problem. |
Thank you for looking into the issue. Weirdly, I tried all 2 cables I have with the same problem. But, when I upload the compiled sample application from https://github.com/HimaxWiseEyePlus/Seeed_Grove_Vision_AI_Module_V2, it works immediately. I found a supplier of OV5647 with autofocus. I hope I don't have to use IMX708. |
Hi @hatrinh-sj, we are sorry that it does not help, we will continue to follow up on your problem, if it is convenient, you can perform the following actions and submit the logs to us, thanks.
|
Hi @iChizer0, I am sorry for the delay. The camera was not with me last week. Now, I was able to test with several cables. During the test, I got the picture only once. When I clicked "Disconnect" and "Connect" again, the picture no longer showed. I repeated the steps multiple times but could not get it works. I tested with the Chrome browser. Here is the serial debug as you requested: |
From the logs you provided, it appears that the acquisition timeout occurs when capturing images from the camera, which may be caused by an unstable connection or a loose or oxidized interface. When the timeout error occurs, the device will not automatically re-initialize the camera, you may need to manually reboot the device or run a command to re-initialize the camera. |
Hi @Pillar1989,
(Moved from Seeed-Studio/Seeed_Arduino_GroveAI#10)
You mentioned that Vision AI V2 does support IM708. But when plugging the IM708 camera, I don't see any image in https://seeed-studio.github.io/SenseCraft-Web-Toolkit/#/setup/process.
I compiled a sample application from https://github.com/HimaxWiseEyePlus/Seeed_Grove_Vision_AI_Module_V2, it works fine. I admit that I don't know if the autofocus function is working. But, I do see images from the camera.
The text was updated successfully, but these errors were encountered: