Default bed temperature for ASA is too low for Creality K1 with Textured PEI plate

[nagisa]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.3.0-dev

Operating System (OS)

Linux

OS Version

NixOS

Additional system information

Probably irrelevant.

Printer

Creality K1C

How to reproduce

1. Select Creality K1C 0.4 nozzle printer
2. Select Textured PEI plate
3. Select Creality Generic ASA filament
4. Open options for the filament (by pressing the edit button next to Creality Generic ASA selection)

Actual results

The bed temperature is 60°C by default with this plate. This is insufficient for this filament type on this type of plate. I seen the parts warp as soon as the printer started on the 3rd layer of the part.

Expected results

The appropriate bed temperature for this filament is 100°C or more and discussing with folks who know 3D printing better than me suggest that there is nothing about PEI plate that would allow bringing the bed temperature down to 60°C that's currently shipping in the default profile. It would be nice if the profile was adjusted.

Project file & Debug log uploads

N/A

Checklist of files to include

• Log file
• Project file

Anything else?

Generic ABS profile has 105°C set for Textured PEI plate bed.