diff --git a/resources/profiles/FLSun.json b/resources/profiles/FLSun.json
index 192ca29f3d5..5939318fb39 100644
--- a/resources/profiles/FLSun.json
+++ b/resources/profiles/FLSun.json
@@ -4,6 +4,14 @@
     "force_update": "0",
     "description": "FLSun configurations",
     "machine_model_list": [
+		{
+            "name": "FLSun Q5",
+            "sub_path": "machine/FLSun Q5.json"
+        },
+	    {
+            "name": "FLSun QQ-S Pro",
+            "sub_path": "machine/FLSun QQ-S Pro.json"
+        },
         {
             "name": "FLSun V400",
             "sub_path": "machine/FLSun V400.json"
@@ -13,10 +21,50 @@
         {
             "name": "fdm_process_common",
             "sub_path": "process/fdm_process_common.json"
+        },
+		{
+            "name": "0.08mm Fine @FLSun Q5",
+            "sub_path": "process/0.08mm Fine @FLSun Q5.json"
+        },
+		{
+            "name": "0.08mm Fine @FLSun QQSPro",
+            "sub_path": "process/0.08mm Fine @FLSun QQSPro.json"
+        },
+		{
+            "name": "0.16mm Optimal @FLSun Q5",
+            "sub_path": "process/0.16mm Optimal @FLSun Q5.json"
+        },
+		{
+            "name": "0.16mm Optimal @FLSun QQSPro",
+            "sub_path": "process/0.16mm Optimal @FLSun QQSPro.json"
+        },
+		{
+            "name": "0.20mm Standard @FLSun Q5",
+            "sub_path": "process/0.20mm Standard @FLSun Q5.json"
+        },
+		{
+            "name": "0.20mm Standard @FLSun QQSPro",
+            "sub_path": "process/0.20mm Standard @FLSun QQSPro.json"
         },
         {
-            "name": "0.20mm Standard @FLSun",
-            "sub_path": "process/0.20mm Standard @FLSun.json"
+            "name": "0.20mm Standard @FLSun V400",
+            "sub_path": "process/0.20mm Standard @FLSun V400.json"
+        },
+		{
+            "name": "0.24mm Draft @FLSun Q5",
+            "sub_path": "process/0.24mm Draft @FLSun Q5.json"
+        },
+		{
+            "name": "0.24mm Draft @FLSun QQSPro",
+            "sub_path": "process/0.24mm Draft @FLSun QQSPro.json"
+        },
+		{
+            "name": "0.30mm Extra Draft @FLSun Q5",
+            "sub_path": "process/0.30mm Extra Draft @FLSun Q5.json"
+        },
+		{
+            "name": "0.30mm Extra Draft @FLSun QQSPro",
+            "sub_path": "process/0.30mm Extra Draft @FLSun QQSPro.json"
         }
     ],
     "filament_list": [
@@ -101,6 +149,14 @@
         {
             "name": "fdm_machine_common",
             "sub_path": "machine/fdm_machine_common.json"
+        },
+		{
+            "name": "FLSun Q5 0.4 nozzle",
+            "sub_path": "machine/FLSun Q5 0.4 nozzle.json"
+        },
+		{
+            "name": "FLSun QQ-S Pro 0.4 nozzle",
+            "sub_path": "machine/FLSun QQ-S Pro 0.4 nozzle.json"
         },
         {
             "name": "FLSun V400 0.4 nozzle",
diff --git a/resources/profiles/FLSun/FLSun Q5_cover.png b/resources/profiles/FLSun/FLSun Q5_cover.png
new file mode 100644
index 00000000000..a924ed06cb8
Binary files /dev/null and b/resources/profiles/FLSun/FLSun Q5_cover.png differ
diff --git a/resources/profiles/FLSun/FLSun QQ-S Pro_cover.png b/resources/profiles/FLSun/FLSun QQ-S Pro_cover.png
new file mode 100644
index 00000000000..aac20e25090
Binary files /dev/null and b/resources/profiles/FLSun/FLSun QQ-S Pro_cover.png differ
diff --git a/resources/profiles/FLSun/FLSun V400_cover.png b/resources/profiles/FLSun/FLSun V400_cover.png
index d4fc0e900b4..eea48b035d6 100644
Binary files a/resources/profiles/FLSun/FLSun V400_cover.png and b/resources/profiles/FLSun/FLSun V400_cover.png differ
diff --git a/resources/profiles/FLSun/filament/FLSun Generic ABS.json b/resources/profiles/FLSun/filament/FLSun Generic ABS.json
index 6ece45e5c7e..8902996c8f1 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic ABS.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic ABS.json	
@@ -13,6 +13,8 @@
         "12"
     ],
     "compatible_printers": [
-      "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/FLSun/filament/FLSun Generic ASA.json b/resources/profiles/FLSun/filament/FLSun Generic ASA.json
index 7c95cea8baa..c590edf9470 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic ASA.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic ASA.json	
@@ -13,6 +13,8 @@
         "12"
     ],
     "compatible_printers": [
-      "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PA-CF.json b/resources/profiles/FLSun/filament/FLSun Generic PA-CF.json
index 1cdcd42861b..954b5613b68 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PA-CF.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PA-CF.json	
@@ -19,6 +19,8 @@
         "8"
     ],
     "compatible_printers": [
-        "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PA.json b/resources/profiles/FLSun/filament/FLSun Generic PA.json
index ded13f512fd..daf4847d70d 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PA.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PA.json	
@@ -16,6 +16,8 @@
         "12"
     ],
     "compatible_printers": [
-        "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PC.json b/resources/profiles/FLSun/filament/FLSun Generic PC.json
index 06274ef1bbe..858545b5c6f 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PC.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PC.json	
@@ -13,6 +13,8 @@
         "0.94"
     ],
     "compatible_printers": [
-        "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PETG.json b/resources/profiles/FLSun/filament/FLSun Generic PETG.json
index b7e9ccf6111..9b5bd640d3e 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PETG.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PETG.json	
@@ -43,6 +43,8 @@
         "; filament start gcode\n"
     ],
     "compatible_printers": [
-      "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PLA-CF.json b/resources/profiles/FLSun/filament/FLSun Generic PLA-CF.json
index 2449c723e71..a41b370ca46 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PLA-CF.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PLA-CF.json	
@@ -19,6 +19,8 @@
         "7"
     ],
     "compatible_printers": [
-        "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PLA.json b/resources/profiles/FLSun/filament/FLSun Generic PLA.json
index 1a1451ef7ae..981135e346b 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PLA.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PLA.json	
@@ -16,6 +16,8 @@
         "8"
     ],
     "compatible_printers": [
-      "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/FLSun/filament/FLSun Generic PVA.json b/resources/profiles/FLSun/filament/FLSun Generic PVA.json
index 079483ab577..cd6fcb4fd42 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic PVA.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic PVA.json	
@@ -19,6 +19,8 @@
         "10"
     ],
     "compatible_printers": [
-      "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/FLSun/filament/FLSun Generic TPU.json b/resources/profiles/FLSun/filament/FLSun Generic TPU.json
index 80e9b311477..b57fd3a1170 100644
--- a/resources/profiles/FLSun/filament/FLSun Generic TPU.json	
+++ b/resources/profiles/FLSun/filament/FLSun Generic TPU.json	
@@ -10,6 +10,8 @@
         "3.2"
     ],
     "compatible_printers": [
-      "FLSun V400 0.4 nozzle"
+		"FLSun Q5 0.4 nozzle",
+		"FLSun QQ-S Pro 0.4 nozzle",
+		"FLSun V400 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/FLSun/flsun_q5_buildplate_model.stl b/resources/profiles/FLSun/flsun_q5_buildplate_model.stl
new file mode 100644
index 00000000000..da74ae975eb
Binary files /dev/null and b/resources/profiles/FLSun/flsun_q5_buildplate_model.stl differ
diff --git a/resources/profiles/FLSun/flsun_q5_buildplate_texture.png b/resources/profiles/FLSun/flsun_q5_buildplate_texture.png
new file mode 100644
index 00000000000..61e017c8f6c
Binary files /dev/null and b/resources/profiles/FLSun/flsun_q5_buildplate_texture.png differ
diff --git a/resources/profiles/FLSun/flsun_qqspro_buildplate_model.stl b/resources/profiles/FLSun/flsun_qqspro_buildplate_model.stl
new file mode 100644
index 00000000000..79b5585a31f
Binary files /dev/null and b/resources/profiles/FLSun/flsun_qqspro_buildplate_model.stl differ
diff --git a/resources/profiles/FLSun/flsun_qqspro_buildplate_texture.png b/resources/profiles/FLSun/flsun_qqspro_buildplate_texture.png
new file mode 100644
index 00000000000..022f30bff78
Binary files /dev/null and b/resources/profiles/FLSun/flsun_qqspro_buildplate_texture.png differ
diff --git a/resources/profiles/FLSun/V400_bed.stl b/resources/profiles/FLSun/flsun_v400_buildplate_model.stl
similarity index 100%
rename from resources/profiles/FLSun/V400_bed.stl
rename to resources/profiles/FLSun/flsun_v400_buildplate_model.stl
diff --git a/resources/profiles/FLSun/V400.svg b/resources/profiles/FLSun/flsun_v400_buildplate_texture.svg
similarity index 100%
rename from resources/profiles/FLSun/V400.svg
rename to resources/profiles/FLSun/flsun_v400_buildplate_texture.svg
diff --git a/resources/profiles/FLSun/machine/FLSun Q5 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun Q5 0.4 nozzle.json
new file mode 100644
index 00000000000..2960a0f2fdc
--- /dev/null
+++ b/resources/profiles/FLSun/machine/FLSun Q5 0.4 nozzle.json	
@@ -0,0 +1,189 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "FLSun Q5 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "FLSun Q5",
+    "default_print_profile": "0.20mm Standard @FLSun Q5",
+	"gcode_flavor": "marlin",
+	"thumbnails": [
+        "260x260"
+    ],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"99.6195x8.71557",
+		"98.4808x17.3648",
+		"96.5926x25.8819",
+		"93.9693x34.202",
+		"90.6308x42.2618",
+		"86.6025x50",
+		"81.9152x57.3576",
+		"76.6044x64.2788",
+		"70.7107x70.7107",
+		"64.2788x76.6044",
+		"57.3576x81.9152",
+		"50x86.6025",
+		"42.2618x90.6308",
+		"34.202x93.9693",
+		"25.8819x96.5926",
+		"17.3648x98.4808",
+		"8.71557x99.6195",
+		"6.12323e-15x100",
+		"-8.71557x99.6195",
+		"-17.3648x98.4808",
+		"-25.8819x96.5926",
+		"-34.202x93.9693",
+		"-42.2618x90.6308",
+		"-50x86.6025",
+		"-57.3576x81.9152",
+		"-64.2788x76.6044",
+		"-70.7107x70.7107",
+		"-76.6044x64.2788",
+		"-81.9152x57.3576",
+		"-86.6025x50",
+		"-90.6308x42.2618",
+		"-93.9693x34.202",
+		"-96.5926x25.8819",
+		"-98.4808x17.3648",
+		"-99.6195x8.71557",
+		"-100x1.22465e-14",
+		"-99.6195x-8.71557",
+		"-98.4808x-17.3648",
+		"-96.5926x-25.8819",
+		"-93.9693x-34.202",
+		"-90.6308x-42.2618",
+		"-86.6025x-50",
+		"-81.9152x-57.3576",
+		"-76.6044x-64.2788",
+		"-70.7107x-70.7107",
+		"-64.2788x-76.6044",
+		"-57.3576x-81.9152",
+		"-50x-86.6025",
+		"-42.2618x-90.6308",
+		"-34.202x-93.9693",
+		"-25.8819x-96.5926",
+		"-17.3648x-98.4808",
+		"-8.71557x-99.6195",
+		"-1.83697e-14x-100",
+		"8.71557x-99.6195",
+		"17.3648x-98.4808",
+		"25.8819x-96.5926",
+		"34.202x-93.9693",
+		"42.2618x-90.6308",
+		"50x-86.6025",
+		"57.3576x-81.9152",
+		"64.2788x-76.6044",
+		"70.7107x-70.7107",
+		"76.6044x-64.2788",
+		"81.9152x-57.3576",
+		"86.6025x-50",
+		"90.6308x-42.2618",
+		"93.9693x-34.202",
+		"96.5926x-25.8819",
+		"98.4808x-17.3648",
+		"99.6195x-8.71557",
+		"100x-2.44929e-14"
+	],
+	"printable_height": "200",
+	"nozzle_type": "hardened_steel",
+	"auxiliary_fan": "0",
+    "machine_max_acceleration_e": [
+        "3000",
+        "800"
+    ],
+	"machine_max_acceleration_extruding": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_retracting": [
+		"2000",
+		"800"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_x": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_y": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_z": [
+		"1500",
+		"800"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"30"
+	],
+	"machine_max_speed_x": [
+		"200",
+		"150"
+	],
+	"machine_max_speed_y": [
+		"200",
+		"150"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"150"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"5",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"5",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"5",
+		"10"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "FLSun",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"3"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "0",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M400 U1\n",
+	"default_filament_profile": [
+		"FLSun Generic PLA"
+	],
+	"machine_start_gcode": ";STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n",
+	"machine_end_gcode": "M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n",
+	"scan_first_layer": "0"
+  }
+  
\ No newline at end of file
diff --git a/resources/profiles/FLSun/machine/FLSun Q5.json b/resources/profiles/FLSun/machine/FLSun Q5.json
new file mode 100644
index 00000000000..e595b53d505
--- /dev/null
+++ b/resources/profiles/FLSun/machine/FLSun Q5.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "FLSun Q5",
+    "model_id": "FLSun-Q5",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "FLSun",
+    "bed_model": "flsun_q5_buildplate_model.stl",
+    "bed_texture": "flsun_q5_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "FLSun Generic ABS;FLSun Generic PLA;FLSun Generic PLA-CF;FLSun Generic PETG;FLSun Generic TPU;FLSun Generic ASA;FLSun Generic PC;FLSun Generic PVA;FLSun Generic PA;FLSun Generic PA-CF"
+}
diff --git a/resources/profiles/FLSun/machine/FLSun QQ-S Pro 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun QQ-S Pro 0.4 nozzle.json
new file mode 100644
index 00000000000..b49b467e5cd
--- /dev/null
+++ b/resources/profiles/FLSun/machine/FLSun QQ-S Pro 0.4 nozzle.json	
@@ -0,0 +1,189 @@
+{
+    "type": "machine",
+    "setting_id": "GM003",
+    "name": "FLSun QQ-S Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_machine_common",
+    "printer_model": "FLSun QQ-S Pro",
+    "default_print_profile": "0.20mm Standard @FLSun QQSPro",
+	"gcode_flavor": "marlin",
+	"thumbnails": [
+        "260x260"
+    ],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"129.505x11.3302",
+		"128.025x22.5743",
+		"125.57x33.6465",
+		"122.16x44.4626",
+		"117.82x54.9404",
+		"112.583x65",
+		"106.49x74.5649",
+		"99.5858x83.5624",
+		"91.9239x91.9239",
+		"83.5624x99.5858",
+		"74.5649x106.49",
+		"65x112.583",
+		"54.9404x117.82",
+		"44.4626x122.16",
+		"33.6465x125.57",
+		"22.5743x128.025",
+		"11.3302x129.505",
+		"7.9602e-15x130",
+		"-11.3302x129.505",
+		"-22.5743x128.025",
+		"-33.6465x125.57",
+		"-44.4626x122.16",
+		"-54.9404x117.82",
+		"-65x112.583",
+		"-74.5649x106.49",
+		"-83.5624x99.5858",
+		"-91.9239x91.9239",
+		"-99.5858x83.5624",
+		"-106.49x74.5649",
+		"-112.583x65",
+		"-117.82x54.9404",
+		"-122.16x44.4626",
+		"-125.57x33.6465",
+		"-128.025x22.5743",
+		"-129.505x11.3302",
+		"-130x1.59204e-14",
+		"-129.505x-11.3302",
+		"-128.025x-22.5743",
+		"-125.57x-33.6465",
+		"-122.16x-44.4626",
+		"-117.82x-54.9404",
+		"-112.583x-65",
+		"-106.49x-74.5649",
+		"-99.5858x-83.5624",
+		"-91.9239x-91.9239",
+		"-83.5624x-99.5858",
+		"-74.5649x-106.49",
+		"-65x-112.583",
+		"-54.9404x-117.82",
+		"-44.4626x-122.16",
+		"-33.6465x-125.57",
+		"-22.5743x-128.025",
+		"-11.3302x-129.505",
+		"-2.38806e-14x-130",
+		"11.3302x-129.505",
+		"22.5743x-128.025",
+		"33.6465x-125.57",
+		"44.4626x-122.16",
+		"54.9404x-117.82",
+		"65x-112.583",
+		"74.5649x-106.49",
+		"83.5624x-99.5858",
+		"91.9239x-91.9239",
+		"99.5858x-83.5624",
+		"106.49x-74.5649",
+		"112.583x-65",
+		"117.82x-54.9404",
+		"122.16x-44.4626",
+		"125.57x-33.6465",
+		"128.025x-22.5743",
+		"129.505x-11.3302",
+		"130x-3.18408e-14"
+	],
+	"printable_height": "360",
+	"nozzle_type": "hardened_steel",
+	"auxiliary_fan": "0",
+    "machine_max_acceleration_e": [
+        "3000",
+        "800"
+    ],
+	"machine_max_acceleration_extruding": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_retracting": [
+		"2000",
+		"800"
+	],
+	"machine_max_acceleration_travel": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_x": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_y": [
+		"1500",
+		"800"
+	],
+	"machine_max_acceleration_z": [
+		"1500",
+		"800"
+	],
+	"machine_max_speed_e": [
+		"60",
+		"30"
+	],
+	"machine_max_speed_x": [
+		"200",
+		"150"
+	],
+	"machine_max_speed_y": [
+		"200",
+		"150"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"150"
+	],
+	"machine_max_jerk_e": [
+		"5",
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"5",
+		"10"
+	],
+	"machine_max_jerk_y": [
+		"5",
+		"10"
+	],
+	"machine_max_jerk_z": [
+		"5",
+		"10"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "FLSun",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retraction_length": [
+		"5"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"deretraction_speed": [
+		"40"
+	],
+	"single_extruder_multi_material": "0",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M400 U1\n",
+	"default_filament_profile": [
+		"FLSun Generic PLA"
+	],
+	"machine_start_gcode": ";STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[nozzle_temperature_initial_layer] ; set extruder final temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder final temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed final temp\nM300 S440 P200; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250; wait between dual beep\nM300 S440 P200; 2nd beep for printer ready\nG4 S10; wait to clean the nozzle\nM300 S440 P200; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [output_filename_format]; Display: Printing started...",
+	"machine_end_gcode": "; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.",
+	"scan_first_layer": "0"
+  }
+  
\ No newline at end of file
diff --git a/resources/profiles/FLSun/machine/FLSun QQ-S Pro.json b/resources/profiles/FLSun/machine/FLSun QQ-S Pro.json
new file mode 100644
index 00000000000..eaf0dac196d
--- /dev/null
+++ b/resources/profiles/FLSun/machine/FLSun QQ-S Pro.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "FLSun QQ-S Pro",
+    "model_id": "FLSun-QQS-Pro",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "FLSun",
+    "bed_model": "flsun_qqspro_buildplate_model.stl",
+    "bed_texture": "flsun_qqspro_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "FLSun Generic ABS;FLSun Generic PLA;FLSun Generic PLA-CF;FLSun Generic PETG;FLSun Generic TPU;FLSun Generic ASA;FLSun Generic PC;FLSun Generic PVA;FLSun Generic PA;FLSun Generic PA-CF"
+}
diff --git a/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json
index 9b6e134fc74..1ac0837ea23 100644
--- a/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json	
+++ b/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json	
@@ -6,7 +6,7 @@
     "instantiation": "true",
     "inherits": "fdm_machine_common",
     "printer_model": "FLSun V400",
-    "default_print_profile": "0.20mm Standard @FLSun",
+    "default_print_profile": "0.20mm Standard @FLSun V400",
     "gcode_flavor": "klipper",
     "nozzle_diameter": [
         "0.4"
diff --git a/resources/profiles/FLSun/machine/FLSun V400.json b/resources/profiles/FLSun/machine/FLSun V400.json
index 9585a230c55..732b7c87299 100644
--- a/resources/profiles/FLSun/machine/FLSun V400.json	
+++ b/resources/profiles/FLSun/machine/FLSun V400.json	
@@ -5,8 +5,8 @@
     "nozzle_diameter": "0.4",
     "machine_tech": "FFF",
     "family": "FLSun",
-    "bed_model": "V400_bed.stl",
-    "bed_texture": "V400.svg",
+    "bed_model": "flsun_v400_buildplate_model.stl",
+    "bed_texture": "flsun_v400_buildplate_texture.svg",
     "hotend_model": "",
     "default_materials": "FLSun Generic ABS;FLSun Generic PLA;FLSun Generic PLA-CF;FLSun Generic PETG;FLSun Generic TPU;FLSun Generic ASA;FLSun Generic PC;FLSun Generic PVA;FLSun Generic PA;FLSun Generic PA-CF"
 }
diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json
new file mode 100644
index 00000000000..a6583ce3854
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.08mm Fine @FLSun Q5",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.08",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "10",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.7",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "800",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "800",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.06",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.06",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "12",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun Q5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json
new file mode 100644
index 00000000000..0f199ba38ce
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.08mm Fine @FLSun QQSPro",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.08",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "10",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.7",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.06",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.06",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "12",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun QQ-S Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json
new file mode 100644
index 00000000000..c65d26f8a39
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @FLSun Q5",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.9",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "800",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "800",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.16",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun Q5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json
new file mode 100644
index 00000000000..acc0d6c6462
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @FLSun QQSPro",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.9",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.16",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun QQ-S Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json
new file mode 100644
index 00000000000..dff16a95938
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @FLSun Q5",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.95",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "800",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "800",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun Q5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json
new file mode 100644
index 00000000000..1686f5c0b5c
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @FLSun QQSPro",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.95",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.2",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun QQ-S Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun V400.json
similarity index 94%
rename from resources/profiles/FLSun/process/0.20mm Standard @FLSun.json
rename to resources/profiles/FLSun/process/0.20mm Standard @FLSun V400.json
index cfda270eddb..da496e4f9c4 100644
--- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun.json	
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun V400.json	
@@ -1,7 +1,7 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm Standard @FLSun",
+  "name": "0.20mm Standard @FLSun V400",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_process_common",
diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json
new file mode 100644
index 00000000000..cdf14f8ceba
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @FLSun Q5",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.95",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "800",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "800",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.18",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.18",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun Q5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json
new file mode 100644
index 00000000000..866fd9cc16c
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @FLSun QQSPro",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0.5",
+	"bridge_flow": "0.95",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.45",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.45",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.18",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.18",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.38",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun QQ-S Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json
new file mode 100644
index 00000000000..6f543a569e8
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.30mm Extra Draft @FLSun Q5",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.3",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0.6",
+	"bridge_flow": "0.95",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "800",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.5",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "800",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.5",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.22",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.22",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.45",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun Q5 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json
new file mode 100644
index 00000000000..458c7533a27
--- /dev/null
+++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json	
@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.30mm Extra Draft @FLSun QQSPro",
+	"from": "system",
+	"inherits": "fdm_process_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.3",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0.6",
+	"bridge_flow": "0.95",
+	"bridge_speed": "30",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.2",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.5",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_acceleration": "1000",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "800",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.5",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "top",
+	"reduce_infill_retraction": "1",
+	"filename_format": "[input_filename_base].gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "5",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.22",
+	"support_filament": "0",
+	"support_line_width": "0.38",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "2.5",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "0.22",
+	"support_speed": "60",
+	"support_threshold_angle": "45",
+	"support_object_xy_distance": "60%",
+	"tree_support_branch_angle": "45",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.45",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "40",
+	"internal_solid_infill_speed": "40",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"FLSun QQ-S Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/FLSun/process/fdm_process_common.json b/resources/profiles/FLSun/process/fdm_process_common.json
index 91f8d15f641..f2bc39f18ce 100644
--- a/resources/profiles/FLSun/process/fdm_process_common.json
+++ b/resources/profiles/FLSun/process/fdm_process_common.json
@@ -104,5 +104,4 @@
     "travel_speed": "200",
     "enable_arc_fitting": "0",
     "exclude_object" : "0"
-
 }