-
Notifications
You must be signed in to change notification settings - Fork 13
Home
prndlrm edited this page Feb 2, 2019
·
76 revisions
Identifying the type of Tuya Wi-Fi Module
| Device | Reported By |
|---|---|
|
Hyleton-311 / XP61065 - set as Hilton-313 in tasmota |
AndyRph |
|
Teckin SP23 - set as BlitzWolf SHP2 config in Tasmota |
Aterfax |
|
Teckin SP22 v1.4 - set as Module (Teckin (52) in Tasmota config after update |
Servidge |
|
Teckin SP10 Configuration |
axiom00 |
|
OUKITEL X6P - same configuration as Tecking SP10 |
amitubale |
|
Gosund WP3 US Round Socket - identical to TanTan WP3 - Script worked on 1 of 2 - Script worked on all four of mine. I just had to repeat executing the script over and over until it succeeded. This may now be corrected. Configuration |
dhami220 meingraham |
|
TanTan WP3 US Round Socket - button on GPIO4, 12 is the red LED, 13 blue, and relay on 14 |
sylvandb |
|
TanTan US Double Outlet - LEDs aren't quite right (everything else works as expected) - see here for sonoff_template.h |
loph917 |
|
iClever IC-BS06 "Smart Outdoor Outlet" - GPIO4 blue LEDi, 5 green, 12 relay1, 14 relay2, 13 button |
sylvandb |
|
ZooZee Outlet - set as Teckin US in tasmota |
loph917 |
|
ZooZee Smart Plug (round) - set as Teckin US (no reporting) |
bkpsu |
|
Teckin Outlet - set as Teckin US in tasmota |
loph917 |
| CE Wifi Plug - Costco | Zebble |
| CE Dimmer - Costco | Zebble |
|
Feit WiFi Bulb - Costco - Not fully supported by Tasmota yet. - Requires SM16726 driver (FastLED) to be added. |
Zebble |
|
Esicoo Round Plug - GPIO1 - Switch1, GPIO13 - Led1i, GPIO14 - Relay1 |
digiblur |
| eMylo Smart Switch | damondins |
|
Merkury Wifi Bulb - Walmart - Not fully supported by Tasmota yet. - Must Set module to Magic Home (34). White and Dim Only No RGB |
damondins |
|
ZEOOTA Wifi Smart Power Strip 4 EU outlets with 4 USB ports (TYWE2S) Module Configuration |
DAVIZINH0 |
| Lonsonho Smart Plug | Flipsoo |
|
Avatar Control AWP07L - after Update LED & Button not working, webfrontend OK, - OTA Update to 6.1.4 OK, set as Module Generic in Tasmota config, D3=57, D4=56, D7=17, D8=21, other=00 - Button & LED OK, at the moment no power meter |
Servidge |
|
Amysen YX-WS01 smart plug - Flashed following the script - Set as Module Type Generic in Tasmota config - GPIO1 = Button1, GPIO12 = Led2i, GPIO13 = Led1i, GPIO14 = Relay1 |
prndlrm |
| Device | Reported By | Tuya FW Version | ESP Module |
|---|---|---|---|
| Bestek MRJ1011 (brick) | thecrazymonkey | ||
| SM-PW702 Single Outlet (brick) | eWill2 | 1.0.6 | tywe3s |
| AWP04L Single Outlet(brick) | eWill2 | 1.0.5 | ESP8266-S3 |
| XS-SSA06 RGB "Round Mini Socket" (brick) | sylvandb | wifi/mcu 1.0.2 | |
| TikLok RGBWW Bulb (wont flash) | willngton | 1.3.1 |