CoaL is a VMware appliance that is a full Triton head node for development and testing. Because most Triton developers work on Macs, this document walks through the process of setting up CoaL on a Mac. Read this document carefully before installing CoaL.
Note: Developers in the community have set up CoaL successfully on Windows and on Linux using these instructions as general guidelines, modifying them as needed.
Additionally: With the introduction of the ISO Installer it may be easier to, within the virtual machine constraints mentioned below, to install a vitual Triton head node from an ISO installer instead. After installing using an ISO, proceed to step 5.
WARNING: The installation procedure and configuration options in this document are not appropriate for production deployments.
The minimum requirements for a good CoaL experience are a Mac with 16 GB RAM and an SSD with 45 GB of disk space available.
The high-level steps for setting up CoaL are:
- Downloading the latest CoaL build.
- Downloading, installing, and configuring VMware.
- Extracting and loading CoaL.
- Booting the VMware appliance (virtual machine).
- Configuring the head node.
- Installing Triton (10 to 20 minutes).
- Testing and developing.
The CoaL tarball is approximately 3 GB and will take some time to download.
To download the latest CoaL build:
curl -C - -O https://us-central.manta.mnx.io/Joyent_Dev/public/SmartDataCenter/coal-latest.tgz
While you wait for the tarball download to complete, you can configure and install VMware.
Most Triton team members run CoaL from VMware Fusion. We recommend VMware version 8.5.3, but users have had success with v5 and v8.
- Download VMware Fusion. Note: For Windows or Linux, download VMware Workstation from VMware Workstation.
- Install VMware.
- When complete, launch the application to confirm that it installed correctly.
- Close VMware.
To configure CoaL's external and admin networks:
-
Mac
curl -s https://raw.githubusercontent.com/joyent/triton/master/tools/coal-mac-vmware-setup | sudo bash
-
Linux
curl -s https://raw.githubusercontent.com/joyent/sdc/master/tools/coal-linux-vmware-setup | sudo bash
-
Windows
Download https://raw.githubusercontent.com/joyent/triton/master/tools/coal-windows-vmware-setup.bat and run
coal-windows-vmware-setup.bat
.
To extract the CoaL virtual machine:
$ tar -zxvf coal-latest.tgz -C ~/Documents/Virtual\ Machines.localized
x root.password.20190122T132623z
x coal-master-20190122T132623Z-g1a445f5-4gb.vmwarevm/
x coal-master-20190122T132623Z-g1a445f5-4gb.vmwarevm/USB-headnode.vmx
x coal-master-20190122T132623Z-g1a445f5-4gb.vmwarevm/zpool.vmdk
x coal-master-20190122T132623Z-g1a445f5-4gb.vmwarevm/USB-headnode.vmdk
x coal-master-20190122T132623Z-g1a445f5-4gb.vmwarevm/4gb.img
...
To load the CoaL appliance:
- Launch VMware Fusion.
- Select File and then click Open.
- Navigate to and select the
.vmwarevm
file that contains the CoaL build. Note: If you are working from the command line instead of the GUI, run:open coal-<branch>-<build_date_time>-<git_sha1_hash>-4gb.vmwarevm
To configure memory:
- Select Virtual Machine and then click Settings. The USB-headnode Settings dialog displays.
- Click Processes & Memory. Change the memory settings, if needed.
Note: The default memory is set to 8192 MB. You can change this setting,
but be sure to leave Mac OS X with at least 8 GB to avoid resource allocation
problems. If you are not using the VMware GUI, you can change the default
memory in the CoaL
USB-headnode.vmx
file. You can set memsize = "6144", or according to your preference. - If you have changed the memory settings, restart the VM.
-
When you are prompted with the Loader menu press '5' to go to the Boot Options menu.
By default, the OS will redirect the console to ttyb which is fine for production but needs to be changed for CoaL. Once in the Boot Options menu, press '2' to cycle through the choices for OS Console until the value is 'text', as shown below:
-
Press '1' to return to the main menu.
-
Press '2' to boot from the USB stick.
Note: If you see a blank screen with a cursor at the top left while the head
node is booting, you may have forgotten to redirect the console.
Note: Because you are in a virtual environment without Intel VT-x support enabled, you'll receive CPU warnings. You can safely ignore them:
Use the following table to configure the development settings for CoaL. In many cases, you will choose the default values. In others, you must type the literal value provided. Variables are in italics. You can set any value for variables.
The final prompt asks that you verify the configuration settings. If you have made a mistake, you can reject the settings and restart the configuration process.
Setting | Value | Notes |
---|---|---|
Instructions | ↵ | |
Company Name | Clavius | You can give the company name any value. |
Data center region | orbit | |
Data center name | coal-1 | Also known as the availability zone (AZ). |
Data center location | Moon, Earth | |
admin interface | 2 | Type 2. The second NIC is set up as the admin network by the CoaL networking script |
(admin) headnode IP address | 10.99.99.7 | Type 10.99.99.7 to specify the IP address. |
(admin) headnode netmask: | ↵ | Press Enter to select the default. |
(admin) Zone's starting IP address: | ↵ | Press Enter to select the default. |
Add external network now? | Y | Type Y to add the external network, or press Enter to select the default. |
'external' interface | 1 | Type 1. The first NIC is set up as the external network by the CoaL networking script |
(external) headnode IP address | 10.88.88.200 | Type 10.88.88.200 to specify the IP address. |
(external) headnode netmask: | ↵ | Press Enter to select the default. |
(external) gateway IP address: | 10.88.88.2 | Type 10.88.88.2 to specify the gateway IP address. |
(external) network VLAN ID | ↵ | Press Enter to select the default. The external network is not on a VLAN in CoaL |
Starting Provisionable IP address for external Network | ↵ | Press Enter to select the default. |
Ending Provisionable IP address for external Network | ↵ | Press Enter to select the default. |
Default gateway IP address: | ↵ | Press Enter to select the default. |
Primary DNS Server | ↵ | Press Enter to select the default. |
Secondary DNS Server | ↵ | Press Enter to select the default. |
Head node domain name | example.com | The domain name should be unique. |
DNS Search Domain | example.com | The search domain should be unique. |
NTP Server IP Address | ↵ | Press Enter to select the default. |
Set root password | rootpass | Type rootpass to set the root password. |
Confirm root password | ||
Set admin password | adminpass1 | Type adminpass1 to set the admin password. |
Confirm admin password | ||
Administrator email | ↵ | Press Enter to select the default. |
Support email | ↵ | Press Enter to select the default. |
Enable telemetry | ↵ | Press Enter to select the default, false. |
Default channel | release | Enter release to download stable versions by default, or enter another preferred channel. |
Verify configuration settings | ↵ | Review the configuration before proceeding. If the configuration is not correct, type n to reject the settings and restart the process. |
Confirm configuration | ↵ | If you verified the configuration settings, you are prompted to confirm them. |
The Verify Configuration prompt looks something like:
CoaL will now install the Triton head node based on the configuration. The installation can take up to 20 minutes. Installation isn’t complete until the Setup complete message displays.
On a Mac, you will be prompted to enter your admin password several times to enable the VM to monitor all network traffic:
A reboot notification displays when the next phase of installation completes:
After the system reboots, images and manifests from the USB key are copied into a cache in the zones ZFS pool. This process can take several minutes:
The final and longest phase of installation involves importing and provisioning the Triton service images. When the installation completes, Setup complete displays.
After setup is complete you should be able to SSH into CoaL using the admin network headnode IP address you configured. For example:
ssh root@10.88.88.200 # password 'rootpass'
Performing health checks is a best practice. You can check the health of CoaL
using sdcadm health
before/after rebooting or updating CoaL.
To confirm the health of the services:
root@headnode (coal-1) ~]# sdcadm health
INSTANCE SERVICE HOSTNAME ALIAS HEALTHY
b25f30b0-e8dc-46e8-a3a3-58e5272b5c16 adminui headnode adminui0 true
1ca8a319-0257-44d5-95a4-64419c7f1ebd amon headnode amon0 true
1555209d-9d88-4216-a0ff-3a8eec8117a5 amonredis headnode amonredis0 true
cee69840-7778-4cff-872a-5696fef22aff assets headnode assets0 true
672f2081-0ee4-4815-a523-e0baf80457bd binder headnode binder0 true
1391af6e-da4a-49d3-8eba-ebb4e2e276c3 ca headnode ca0 true
68f59f8f-bed8-46d0-a08b-99628d524e44 cnapi headnode cnapi0 true
8654d01f-b6f5-4462-a4cf-248944384fbb dhcpd headnode dhcpd0 true
1774528c-c960-4e3e-8d5c-858c5e4b73de fwapi headnode fwapi0 true
8f9ee32c-73b0-4ea5-a685-c2fd9141edf0 imgapi headnode imgapi0 true
df0cfe72-6067-450d-bf98-760ed3009783 mahi headnode mahi0 true
9f93657d-2a8d-44fc-831b-f609b22aa3e6 manatee headnode manatee0 true
46b4278d-08c5-4267-9b89-914eaf0c4cd9 moray headnode moray0 true
796f56af-78b1-4a2b-a364-ad1eed275e3a napi headnode napi0 true
099c7c92-a5e5-42c0-84c2-0774584c808d papi headnode papi0 true
69980f40-2bfc-4673-8321-38d22e74eea6 rabbitmq headnode rabbitmq0 true
c7cfcfaa-5369-4236-8ed9-96796d3a9ef5 sapi headnode sapi0 true
f30cb983-f1fe-43d0-b093-31b2c5006b01 sdc headnode sdc0 true
247f7e5f-e353-46c5-b615-eab326a96089 ufds headnode ufds0 true
a1e8c136-2fed-4cd1-b3f6-0ec92ecc073e vmapi headnode vmapi0 true
c47c1b9f-e349-493c-b7d2-4c3a51fd2f21 workflow headnode workflow0 true
564de8b3-3203-b2d7-402b-3698369f114f global headnode global true
e80eb8a6-3c53-4ce5-b7b9-6f8bd174a010 amon-agent headnode - true
618fbb3b-bb5b-49b7-92ff-b8fb5a27e706 amon-relay headnode - true
03323225-bd5d-4978-b0a5-6ef59be16f9d cmon-agent headnode - true
479f9013-73f7-416e-9b16-66486f638195 cn-agent headnode - true
7084a8b5-7646-406f-a134-97f2a8beb3f0 config-agent headnode - true
b2fa15f7-b245-4e5a-ad31-b1790f95b77c firewaller headnode - true
f32aa368-1632-47b9-a2bc-1079a550a9d2 hagfish-watcher headnode - true
a411b34d-f1f2-4a16-9454-fb7cb8c21e7c net-agent headnode - true
efadb38d-6f53-4d94-bacc-29c04d56a076 smartlogin headnode - true
eadc8725-8dc7-4d67-82ea-3ca081b821ae vm-agent headnode - true
External NICs are required to access remote update sources and the AdminUI via a browser.
To add external nics to imgapi
and adminui
:
[root@headnode (coal-1) ~]# sdcadm post-setup common-external-nics
Added external nic to adminui
Added external nic to imgapi
Note: This command does not wait for the add nics
jobs to
complete. Once you submit the command, you might need to wait after
the command exits until you are sure that the jobs really finish.
To confirm which services have an external IP, run sdc-vmapi
:
root@headnode (coal-1) ~]# sdc-vmapi /vms?state=running | json -H -ga alias nics.0.ip nics.1.ip
dhcpd0 10.99.99.9
imgapi0 10.99.99.21 10.88.88.4
sdc0 10.99.99.28
workflow0 10.99.99.19
napi0 10.99.99.10
fwapi0 10.99.99.26
assets0 10.99.99.8
moray0 10.99.99.17
ufds0 10.99.99.18
redis0 10.99.99.24
sapi0 10.99.99.32
vmapi0 10.99.99.27
cnapi0 10.99.99.22
binder0 10.99.99.11
amonredis0 10.99.99.23
rabbitmq0 10.99.99.20
manatee0 10.99.99.16
papi0 10.99.99.29
amon0 10.99.99.25
ca0 10.99.99.30
mahi0 10.99.99.33
adminui0 10.99.99.31 10.88.88.3
To test whether you can access the AdminUI via the external IP address, in a web browser on the host computer, navigate to https://10.88.88.3.
CloudAPI provides the self-serve API access to Triton. If you are developing or testing against CloudAPI, you can install it by running:
root@headnode (coal-1) ~]# sdcadm post-setup cloudapi
cloudapi0 zone created
If you plan to use CloudAPI in CoaL and to provision VMs, you will need to enable the head node to act as a compute node for instances. The head node is excluded from the set of servers used for provisioning customer instances. For development and testing, allowing the head node to act as a compute node for instances is useful.
To enable the head node to act as a compute node for instances:
[root@headnode (coal-1) ~]# sdcadm post-setup dev-headnode-prov
Configuring CNAPI to allow headnode provisioning and over-provisioning (allow a minute to propagate)
Fabrics are not required to run CoaL. If you need to setup fabrics for development purposes, you can refer to Set up fabrics in CoaL
The default channel can be modified by setting the update channel:
[root@headnode (coal-1) ~]# sdcadm channel set dev
Update channel has been successfully set to: 'dev'
To update sdcadm
:
[root@headnode (coal-1) ~]# sdcadm --version
sdcadm 1.4.4 (release-20150205-20150205T060457Z-g7d76790)
[root@headnode (coal-1) ~]# sdcadm self-update --latest
Update to sdcadm 1.5.0 (master-20150211T134112Z-gef31015)
Download update from https://updates.tritondatacenter.com
Run sdcadm installer (log at /var/sdcadm/self-updates/20150217T234531Z/install.log)
Updated to sdcadm 1.5.0 (master-20150211T134112Z-gef31015, elapsed 7s)
Most services store their information in Manatee. None of the other
services keep any permanent data locally. (imgapi
is the occasional
exception.)
To take a ZFS snapshot of the manatee zone and temporarily store on head node's drive:
MANATEE0_UUID=$(vmadm lookup -1 alias=~manatee)
zfs snapshot zones/$MANATEE0_UUID/data/manatee@backup
zfs send zones/$MANATEE0_UUID/data/manatee@backup > /var/tmp/manatee-backup.zfs
zfs destroy zones/$MANATEE0_UUID/data/manatee@backup
Now that you have backed up the Manatee zone, download and install the updated images for the services. This process can take up to 60 minutes depending on how many services have new images.
-
To update global zone tools, run:
[root@headnode (coal-1) ~]# sdcadm experimental update-gz-tools --latest Downloading gz-tools image 55d74974-8c0b-4126-8ea4-5c246cf412f5 (2.0.0) to /var/tmp/gz-tools-55d74974-8c0b-4126-8ea4-5c246cf412f5.tgz Decompressing gz-tools tarball Updating "sdc" zone tools Updating global zone scripts Mounting USB key Unmounting USB key Updating cn_tools on all compute nodes Cleaning up gz-tools tarball Updated gz-tools successfully (elapsed 13s).
-
To update the agents:
[root@headnode (coal-1) ~]# sdcadm experimental update-agents --latest -y --all UUID of latest installed agents image is: b38d1458-38d1-4884-ab05-6e36692c1700 Ensuring contact with all servers This update will make the following changes: Download and install agentsshar image c9d439e0-494c-4767-9979-dc09725735cb (1.0.0-master-20150821T193800Z-gd067c0e) on 1 servers Downloading agentsshar image to /var/tmp/agents-c9d439e0-494c-4767-9979-dc09725735cb.sh Running agents installer into 1 servers ...494c-4767-9979-dc09725735cb.sh [=================================================================>] 100% 1 Ur command run complete Reloading servers sysinfo sysinfo reloaded for all the running servers Refresh config-agent into all the setup and running servers config-agent refresh for all the running servers Done.
-
To update all the services, run the command below. This step can take up to 45 minutes depending on how many services have new images.
[root@headnode (coal-1) /var/tmp]# sdcadm update --all -y Finding candidate update images for 23 services (papi, mahi, ca, manatee, amonredis, amon, moray, binder, ufds, cnapi, dhcpd, redis, napi, workflow, fwapi, sdc, adminui, imgapi, vmapi, sapi, cloudapi, manta, assets). Note: There are no "cloudapi" instances. Only the service configuration will be updated. Note: There are no "manta" instances. Only the service configuration will be updated. This update will make the following changes: download 22 images (1108 MiB): image 85157ca0-bd90-11e4-9016-477613964961 (papi@master-20150226T081600Z-g7905a77) image a3012cb0-bde9-11e4-8816-57d15d66624e (manta-authcache@master-20150226T185448Z-g4e3f5d9) image 78c965a4-bd8d-11e4-a1bc-2701505c414d (amon@master-20150226T075046Z-g58ecaf8) image 6e9b95ec-beb5-11e4-806b-6fc4218e1009 (sdc-postgres@master-20150227T191223Z-gad45608) image 30fe9576-bd8f-11e4-9066-63d665bc96ce (manta-nameservice@master-20150226T080343Z-gba090a8) ... Updating ZK leader Reprovisioning fbbafcc4-b34e-4365-b129-c7ca3c1b7115 VM 564deee0-9ceb-4e0b-999c-e50f74a7b6f3 Wait (sleep) for binder instance fbbafcc4-b34e-4365-b129-c7ca3c1b7115 to come up "mahi" VM already has a delegate dataset Installing image a3012cb0-bde9-11e4-8816-57d15d66624e (manta-authcache@master-20150226T185448Z-g4e3f5d9) Reprovisioning mahi VM 0ce580dd-725b-4f80-a341-963359802e90 Wait (60s) for mahi instance 0ce580dd-725b-4f80-a341-963359802e90 to come up Updated successfully (elapsed 2297s).
-
To obtain other miscellaneous updates:
[root@headnode (coal-1) ~]# sdcadm experimental update-other Updating maintain_resolvers for all vm services Updating DNS domain service metadata for papi, mahi Updating DNS domain SDC application metadata for papi, mahi No need to update region_name for this data center sapi_domain already present on node.config Done.
-
To confirm health, run
sdcadm health
.
Triton SmartOS is the operating system, or the platform. You may update the platform image (PI) at the same time you install Triton updates. You need not reboot the head node or compute nodes (CN) right away.
- To download and install the latest platform image:
[root@headnode (coal-1) ~]# sdcadm platform install --latest Downloading platform 20150312T155347Z (image 6564370e-da8f-4c40-b66e-9c4ba21e9f50) to /var/tmp/platform-master-20150312T155347Z.tgz Installing platform image onto USB key ==> Mounting USB key ==> Staging 20150312T155347Z ######################################################################## 100.0% ==> Unpacking 20150312T155347Z to /mnt/usbkey/os ==> This may take a while... ==> Copying 20150312T155347Z to /usbkey/os ==> Unmounting USB Key ==> Adding to list of available platforms ==> Done! Platform installer finished successfully Proceeding to complete the update Updating 'latest' link Installation complete
- To update the head node to use the latest platform image, run:
This command assigns the latest platform image to the head node, which is included with the
[root@headnode (coal-1) ~]# sdcadm platform assign --latest --all updating headnode 564dc5bc-f596-6234-8041-bab9c76c2509 to 20150205T055835Z Setting boot params for 564dc5bc-f596-6234-8041-bab9c76c2509 Updating booter cache for servers Done updating booter caches
--all
servers option on thesdcadm platform assign
command. - To confirm the update:
[root@headnode (coal-1) ~]# sdcadm platform list VERSION CURRENT_PLATFORM BOOT_PLATFORM LATEST 20150219T182356Z 0 1 true 20150205T055835Z 1 0 false
- To reboot the head node:
[root@headnode (coal-1) ~]# reboot reboot: Halting 22 zones. Connection to 10.88.88.200 closed by remote host.
- To log in again and confirm the platform version:
% ssh root@10.88.88.200 Password: Last login: Thu Feb 19 21:04:24 2015 from 10.88.88.1 - SmartOS Live Image v0.147+ build: 20150219T182356Z
- To confirm health:
sdcadm health
For more information on updating Triton, see Updating a Triton standup using sdcadm
For general Triton customer information, see Triton customer documentation.