-
-
Notifications
You must be signed in to change notification settings - Fork 2.1k
/
fdmprinter.def.json
8679 lines (8679 loc) · 492 KB
/
fdmprinter.def.json
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
{
"name": "FDM Printer Base Description",
"version": 2,
"metadata":
{
"type": "machine",
"author": "Unknown",
"manufacturer": "Unknown",
"setting_version": 23,
"file_formats": "text/x-gcode;model/stl;application/x-wavefront-obj;application/x3g",
"visible": false,
"has_materials": true,
"has_variants": false,
"has_machine_quality": false,
"preferred_material": "generic_pla",
"preferred_quality_type": "normal",
"machine_extruder_trains": { "0": "fdmextruder" },
"supports_usb_connection": true,
"supports_network_connection": false
},
"settings":
{
"machine_settings":
{
"label": "Machine",
"type": "category",
"description": "Machine specific settings",
"icon": "Printer",
"children":
{
"machine_name":
{
"label": "Machine Type",
"description": "The name of your 3D printer model.",
"default_value": "Unknown",
"type": "str",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_show_variants":
{
"label": "Show Machine Variants",
"description": "Whether to show the different variants of this machine, which are described in separate json files.",
"default_value": false,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_start_gcode":
{
"label": "Start G-code",
"description": "G-code commands to be executed at the very start - separated by \\n.",
"default_value": "G28 ;Home\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0",
"type": "str",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_end_gcode":
{
"label": "End G-code",
"description": "G-code commands to be executed at the very end - separated by \\n.",
"default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
"type": "str",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"material_guid":
{
"label": "Material GUID",
"description": "GUID of the material. This is set automatically.",
"default_value": "",
"type": "str",
"enabled": false
},
"material_type":
{
"label": "Material Type",
"description": "The type of material used.",
"default_value": "",
"type": "str",
"enabled": false
},
"material_brand":
{
"label": "Material Brand",
"description": "The brand of material used.",
"default_value": "",
"type": "str",
"enabled": false
},
"material_diameter":
{
"label": "Diameter",
"description": "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament.",
"unit": "mm",
"type": "float",
"default_value": 2.85,
"minimum_value": "0.0001",
"minimum_value_warning": "0.4",
"maximum_value_warning": "3.5",
"enabled": "machine_gcode_flavor != \"UltiGCode\"",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"material_bed_temp_wait":
{
"label": "Wait for Build Plate Heatup",
"description": "Whether to insert a command to wait until the build plate temperature is reached at the start.",
"default_value": true,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"material_print_temp_wait":
{
"label": "Wait for Nozzle Heatup",
"description": "Whether to wait until the nozzle temperature is reached at the start.",
"default_value": true,
"type": "bool",
"enabled": "machine_nozzle_temp_enabled",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"material_print_temp_prepend":
{
"label": "Include Material Temperatures",
"description": "Whether to include nozzle temperature commands at the start of the gcode. When the start_gcode already contains nozzle temperature commands Cura frontend will automatically disable this setting.",
"default_value": true,
"type": "bool",
"enabled": "machine_nozzle_temp_enabled",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"material_bed_temp_prepend":
{
"label": "Include Build Plate Temperature",
"description": "Whether to include build plate temperature commands at the start of the gcode. When the start_gcode already contains build plate temperature commands Cura frontend will automatically disable this setting.",
"default_value": true,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_width":
{
"label": "Machine Width",
"description": "The width (X-direction) of the printable area.",
"default_value": 100,
"type": "float",
"minimum_value": "0.001",
"maximum_value": "2000000",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_depth":
{
"label": "Machine Depth",
"description": "The depth (Y-direction) of the printable area.",
"default_value": 100,
"type": "float",
"minimum_value": "0.001",
"maximum_value": "2000000",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_height":
{
"label": "Machine Height",
"description": "The height (Z-direction) of the printable area.",
"default_value": 100,
"type": "float",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_shape":
{
"label": "Build Plate Shape",
"description": "The shape of the build plate without taking unprintable areas into account.",
"default_value": "rectangular",
"type": "enum",
"options":
{
"rectangular": "Rectangular",
"elliptic": "Elliptic"
},
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_buildplate_type":
{
"label": "Build Plate Material",
"description": "The material of the build plate installed on the printer.",
"default_value": "glass",
"type": "enum",
"options":
{
"glass": "Glass",
"aluminum": "Aluminum"
},
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_heated_bed":
{
"label": "Has Heated Build Plate",
"description": "Whether the machine has a heated build plate present.",
"default_value": false,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_heated_build_volume":
{
"label": "Has Build Volume Temperature Stabilization",
"description": "Whether the machine is able to stabilize the build volume temperature.",
"default_value": false,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_always_write_active_tool":
{
"label": "Always Write Active Tool",
"description": "Write active tool after sending temp commands to inactive tool. Required for Dual Extruder printing with Smoothie or other firmware with modal tool commands.",
"default_value": false,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_center_is_zero":
{
"label": "Is Center Origin",
"description": "Whether the X/Y coordinates of the zero position of the printer is at the center of the printable area.",
"default_value": false,
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_extruder_count":
{
"label": "Number of Extruders",
"description": "Number of extruder trains. An extruder train is the combination of a feeder, bowden tube, and nozzle.",
"default_value": 1,
"minimum_value": "1",
"maximum_value": "16",
"type": "int",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"extruders_enabled_count":
{
"label": "Number of Extruders That Are Enabled",
"description": "Number of extruder trains that are enabled; automatically set in software",
"value": "machine_extruder_count",
"default_value": 1,
"minimum_value": "1",
"maximum_value": "16",
"type": "int",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_nozzle_tip_outer_diameter":
{
"label": "Outer Nozzle Diameter",
"description": "The outer diameter of the tip of the nozzle.",
"unit": "mm",
"default_value": 1,
"type": "float",
"settable_per_mesh": false,
"settable_per_extruder": true,
"settable_per_meshgroup": false,
"settable_globally": false
},
"machine_nozzle_head_distance":
{
"label": "Nozzle Length",
"description": "The height difference between the tip of the nozzle and the lowest part of the print head.",
"unit": "mm",
"default_value": 3,
"type": "float",
"settable_per_mesh": false,
"settable_per_extruder": true,
"settable_per_meshgroup": false
},
"machine_nozzle_expansion_angle":
{
"label": "Nozzle Angle",
"description": "The angle between the horizontal plane and the conical part right above the tip of the nozzle.",
"unit": "\u00b0",
"type": "int",
"default_value": 45,
"maximum_value": "89",
"minimum_value": "1",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_heat_zone_length":
{
"label": "Heat Zone Length",
"description": "The distance from the tip of the nozzle in which heat from the nozzle is transferred to the filament.",
"unit": "mm",
"default_value": 16,
"type": "float",
"settable_per_mesh": false,
"settable_per_extruder": true,
"settable_per_meshgroup": false
},
"machine_nozzle_temp_enabled":
{
"label": "Enable Nozzle Temperature Control",
"description": "Whether to control temperature from Cura. Turn this off to control nozzle temperature from outside of Cura.",
"default_value": true,
"value": "machine_gcode_flavor != \"UltiGCode\"",
"type": "bool",
"settable_per_mesh": false,
"settable_per_extruder": true,
"settable_per_meshgroup": false
},
"machine_nozzle_heat_up_speed":
{
"label": "Heat Up Speed",
"description": "The speed (\u00b0C/s) by which the nozzle heats up averaged over the window of normal printing temperatures and the standby temperature.",
"default_value": 2.0,
"unit": "\u00b0C/s",
"type": "float",
"enabled": "machine_nozzle_temp_enabled",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_nozzle_cool_down_speed":
{
"label": "Cool Down Speed",
"description": "The speed (\u00b0C/s) by which the nozzle cools down averaged over the window of normal printing temperatures and the standby temperature.",
"default_value": 2.0,
"unit": "\u00b0C/s",
"type": "float",
"enabled": "machine_nozzle_temp_enabled",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_min_cool_heat_time_window":
{
"label": "Minimal Time Standby Temperature",
"description": "The minimal time an extruder has to be inactive before the nozzle is cooled. Only when an extruder is not used for longer than this time will it be allowed to cool down to the standby temperature.",
"default_value": 50.0,
"unit": "s",
"type": "float",
"enabled": "machine_nozzle_temp_enabled",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_gcode_flavor":
{
"label": "G-code Flavor",
"description": "The type of g-code to be generated.",
"type": "enum",
"options":
{
"RepRap (Marlin/Sprinter)": "Marlin",
"RepRap (Volumetric)": "Marlin (Volumetric)",
"RepRap (RepRap)": "RepRap",
"UltiGCode": "Ultimaker 2",
"Griffin": "Griffin",
"Makerbot": "Makerbot",
"BFB": "Bits from Bytes",
"MACH3": "Mach3",
"Repetier": "Repetier"
},
"default_value": "RepRap (Marlin/Sprinter)",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_firmware_retract":
{
"label": "Firmware Retraction",
"description": "Whether to use firmware retract commands (G10/G11) instead of using the E property in G1 commands to retract the material.",
"type": "bool",
"default_value": false,
"value": "machine_gcode_flavor == 'RepRap (Volumetric)' or machine_gcode_flavor == 'UltiGCode' or machine_gcode_flavor == 'BFB'",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_extruders_share_heater":
{
"label": "Extruders Share Heater",
"description": "Whether the extruders share a single heater rather than each extruder having its own heater.",
"type": "bool",
"default_value": false,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_extruders_share_nozzle":
{
"label": "Extruders Share Nozzle",
"description": "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter.",
"type": "bool",
"default_value": false,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_extruders_shared_nozzle_initial_retraction":
{
"label": "Shared Nozzle Initial Retraction",
"description": "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts.",
"unit": "mm",
"default_value": 0,
"minimum_value": "0",
"type": "float",
"enabled": "machine_extruders_share_nozzle",
"settable_per_mesh": false,
"settable_per_extruder": true,
"settable_per_meshgroup": false
},
"machine_disallowed_areas":
{
"label": "Disallowed Areas",
"description": "A list of polygons with areas the print head is not allowed to enter.",
"type": "polygons",
"default_value": [],
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"nozzle_disallowed_areas":
{
"label": "Nozzle Disallowed Areas",
"description": "A list of polygons with areas the nozzle is not allowed to enter.",
"type": "polygons",
"default_value": [],
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_head_with_fans_polygon":
{
"label": "Machine Head & Fan Polygon",
"description": "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates.",
"type": "polygon",
"default_value": [
[-20, 10],
[10, 10],
[10, -10],
[-20, -10]
],
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"gantry_height":
{
"label": "Gantry Height",
"description": "The height difference between the tip of the nozzle and the gantry system (X and Y axes).",
"default_value": 99999999999,
"value": "machine_height",
"type": "float",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_nozzle_id":
{
"label": "Nozzle ID",
"description": "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\".",
"type": "str",
"default_value": "unknown",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_nozzle_size":
{
"label": "Nozzle Diameter",
"description": "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size.",
"unit": "mm",
"type": "float",
"default_value": 0.4,
"minimum_value": "0.001",
"maximum_value_warning": "10",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_use_extruder_offset_to_offset_coords":
{
"label": "Offset with Extruder",
"description": "Apply the extruder offset to the coordinate system. Affects all extruders.",
"type": "bool",
"default_value": true,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"extruder_prime_pos_z":
{
"label": "Extruder Prime Z Position",
"description": "The Z coordinate of the position where the nozzle primes at the start of printing.",
"type": "float",
"unit": "mm",
"default_value": 0,
"minimum_value_warning": "0",
"maximum_value": "machine_height",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"extruder_prime_pos_abs":
{
"label": "Absolute Extruder Prime Position",
"description": "Make the extruder prime position absolute rather than relative to the last-known location of the head.",
"type": "bool",
"default_value": false,
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_max_feedrate_x":
{
"label": "Maximum Speed X",
"description": "The maximum speed for the motor of the X-direction.",
"unit": "mm/s",
"type": "float",
"default_value": 299792458000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_feedrate_y":
{
"label": "Maximum Speed Y",
"description": "The maximum speed for the motor of the Y-direction.",
"unit": "mm/s",
"type": "float",
"default_value": 299792458000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_feedrate_z":
{
"label": "Maximum Speed Z",
"description": "The maximum speed for the motor of the Z-direction.",
"unit": "mm/s",
"type": "float",
"default_value": 299792458000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_feedrate_e":
{
"label": "Maximum Speed E",
"description": "The maximum speed of the filament.",
"unit": "mm/s",
"type": "float",
"default_value": 299792458000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_acceleration_x":
{
"label": "Maximum Acceleration X",
"description": "Maximum acceleration for the motor of the X-direction",
"unit": "mm/s\u00b2",
"type": "float",
"default_value": 9000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_acceleration_y":
{
"label": "Maximum Acceleration Y",
"description": "Maximum acceleration for the motor of the Y-direction.",
"unit": "mm/s\u00b2",
"type": "float",
"default_value": 9000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_acceleration_z":
{
"label": "Maximum Acceleration Z",
"description": "Maximum acceleration for the motor of the Z-direction.",
"unit": "mm/s\u00b2",
"type": "float",
"default_value": 100,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_acceleration_e":
{
"label": "Maximum Filament Acceleration",
"description": "Maximum acceleration for the motor of the filament.",
"unit": "mm/s\u00b2",
"type": "float",
"default_value": 10000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_acceleration":
{
"label": "Default Acceleration",
"description": "The default acceleration of print head movement.",
"unit": "mm/s\u00b2",
"type": "float",
"default_value": 4000,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_jerk_xy":
{
"label": "Default X-Y Jerk",
"description": "Default jerk for movement in the horizontal plane.",
"unit": "mm/s",
"type": "float",
"default_value": 20.0,
"minimum_value": "0",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_jerk_z":
{
"label": "Default Z Jerk",
"description": "Default jerk for the motor of the Z-direction.",
"unit": "mm/s",
"type": "float",
"default_value": 0.4,
"minimum_value": "0",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_max_jerk_e":
{
"label": "Default Filament Jerk",
"description": "Default jerk for the motor of the filament.",
"unit": "mm/s",
"type": "float",
"default_value": 5.0,
"minimum_value": "0",
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_steps_per_mm_x":
{
"label": "Steps per Millimeter (X)",
"description": "How many steps of the stepper motor will result in one millimeter of movement in the X direction.",
"type": "float",
"default_value": 50,
"minimum_value": "0.0000001",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_steps_per_mm_y":
{
"label": "Steps per Millimeter (Y)",
"description": "How many steps of the stepper motor will result in one millimeter of movement in the Y direction.",
"type": "float",
"default_value": 50,
"minimum_value": "0.0000001",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_steps_per_mm_z":
{
"label": "Steps per Millimeter (Z)",
"description": "How many steps of the stepper motor will result in one millimeter of movement in the Z direction.",
"type": "float",
"default_value": 50,
"minimum_value": "0.0000001",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_steps_per_mm_e":
{
"label": "Steps per Millimeter (E)",
"description": "How many steps of the stepper motors will result in moving the feeder wheel by one millimeter around its circumference.",
"type": "float",
"default_value": 1600,
"minimum_value": "0.0000001",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_endstop_positive_direction_x":
{
"label": "X Endstop in Positive Direction",
"description": "Whether the endstop of the X axis is in the positive direction (high X coordinate) or negative (low X coordinate).",
"type": "bool",
"default_value": false,
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_endstop_positive_direction_y":
{
"label": "Y Endstop in Positive Direction",
"description": "Whether the endstop of the Y axis is in the positive direction (high Y coordinate) or negative (low Y coordinate).",
"type": "bool",
"default_value": false,
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_endstop_positive_direction_z":
{
"label": "Z Endstop in Positive Direction",
"description": "Whether the endstop of the Z axis is in the positive direction (high Z coordinate) or negative (low Z coordinate).",
"type": "bool",
"default_value": true,
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_minimum_feedrate":
{
"label": "Minimum Feedrate",
"description": "The minimal movement speed of the print head.",
"unit": "mm/s",
"type": "float",
"default_value": 0.0,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
},
"machine_feeder_wheel_diameter":
{
"label": "Feeder Wheel Diameter",
"description": "The diameter of the wheel that drives the material in the feeder.",
"unit": "mm",
"type": "float",
"default_value": 10.0,
"settable_per_mesh": false,
"settable_per_extruder": true
},
"machine_scale_fan_speed_zero_to_one":
{
"label": "Scale Fan Speed To 0-1",
"description": "Scale the fan speed to be between 0 and 1 instead of between 0 and 256.",
"type": "bool",
"default_value": false,
"settable_per_mesh": false,
"settable_per_extruder": false,
"settable_per_meshgroup": false
}
}
},
"resolution":
{
"label": "Quality",
"type": "category",
"icon": "PrintQuality",
"description": "All settings that influence the resolution of the print. These settings have a large impact on the quality (and print time)",
"children":
{
"layer_height":
{
"label": "Layer Height",
"description": "The height of each layer in mm. Higher values produce faster prints in lower resolution, lower values produce slower prints in higher resolution.",
"unit": "mm",
"type": "float",
"default_value": 0.1,
"minimum_value": "0.001",
"minimum_value_warning": "0.04",
"maximum_value_warning": "0.8 * min(extruderValues('machine_nozzle_size'))",
"settable_per_mesh": false,
"settable_per_extruder": false
},
"layer_height_0":
{
"label": "Initial Layer Height",
"description": "The height of the initial layer in mm. A thicker initial layer makes adhesion to the build plate easier.",
"unit": "mm",
"type": "float",
"default_value": 0.3,
"resolve": "min(extruderValues('layer_height_0'))",
"minimum_value": "0.001",
"minimum_value_warning": "0.1",
"maximum_value_warning": "0.8 * min(extruderValues('machine_nozzle_size'))",
"settable_per_mesh": false,
"settable_per_extruder": false
},
"line_width":
{
"label": "Line Width",
"description": "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"default_value": 0.4,
"type": "float",
"value": "machine_nozzle_size",
"settable_per_mesh": true,
"children":
{
"wall_line_width":
{
"label": "Wall Line Width",
"description": "Width of a single wall line.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"value": "line_width",
"default_value": 0.4,
"type": "float",
"limit_to_extruder": "wall_0_extruder_nr if wall_x_extruder_nr == wall_0_extruder_nr else -1",
"settable_per_mesh": true,
"children":
{
"wall_line_width_0":
{
"label": "Outer Wall Line Width",
"description": "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "(0.1 + 0.4 * machine_nozzle_size) if inset_direction == \"outside_in\" else 0.1 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"default_value": 0.4,
"value": "wall_line_width",
"type": "float",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_mesh": true
},
"wall_line_width_x":
{
"label": "Inner Wall(s) Line Width",
"description": "Width of a single wall line for all wall lines except the outermost one.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"default_value": 0.4,
"value": "wall_line_width",
"type": "float",
"limit_to_extruder": "wall_x_extruder_nr",
"settable_per_mesh": true
}
}
},
"skin_line_width":
{
"label": "Top/Bottom Line Width",
"description": "Width of a single top/bottom line.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"default_value": 0.4,
"type": "float",
"value": "line_width",
"enabled": "top_layers > 0 or bottom_layers > 0",
"limit_to_extruder": "top_bottom_extruder_nr",
"settable_per_mesh": true
},
"infill_line_width":
{
"label": "Infill Line Width",
"description": "Width of a single infill line.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "3 * machine_nozzle_size",
"default_value": 0.4,
"type": "float",
"value": "line_width",
"enabled": "infill_sparse_density > 0",
"limit_to_extruder": "infill_extruder_nr",
"settable_per_mesh": true
},
"skirt_brim_line_width":
{
"label": "Skirt/Brim Line Width",
"description": "Width of a single skirt or brim line.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "3 * machine_nozzle_size",
"default_value": 0.4,
"type": "float",
"value": "line_width",
"enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('draft_shield_enabled') or resolveOrValue('ooze_shield_enabled')",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"support_line_width":
{
"label": "Support Line Width",
"description": "Width of a single support structure line.",
"unit": "mm",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "3 * machine_nozzle_size",
"default_value": 0.4,
"type": "float",
"enabled": "(support_enable or support_meshes_present)",
"value": "line_width",
"limit_to_extruder": "support_infill_extruder_nr",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"support_interface_line_width":
{
"label": "Support Interface Line Width",
"description": "Width of a single line of support roof or floor.",
"unit": "mm",
"default_value": 0.4,
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"type": "float",
"enabled": "(support_enable or support_meshes_present) and support_interface_enable",
"limit_to_extruder": "support_interface_extruder_nr",
"value": "line_width",
"settable_per_mesh": false,
"settable_per_extruder": true,
"children":
{
"support_roof_line_width":
{
"label": "Support Roof Line Width",
"description": "Width of a single support roof line.",
"unit": "mm",
"default_value": 0.4,
"minimum_value": "0.001",
"minimum_value_warning": "0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"type": "float",
"enabled": "(support_enable or support_meshes_present) and support_roof_enable",
"limit_to_extruder": "support_roof_extruder_nr",
"value": "extruderValue(support_roof_extruder_nr, 'support_interface_line_width')",
"settable_per_mesh": false,
"settable_per_extruder": true
},
"support_bottom_line_width":
{
"label": "Support Floor Line Width",
"description": "Width of a single support floor line.",
"unit": "mm",
"default_value": 0.4,
"minimum_value": "0.001",
"minimum_value_warning": "0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"type": "float",
"enabled": "(support_enable or support_meshes_present) and support_bottom_enable",
"limit_to_extruder": "support_bottom_extruder_nr",
"value": "extruderValue(support_bottom_extruder_nr, 'support_interface_line_width')",
"settable_per_mesh": false,
"settable_per_extruder": true
}
}
},
"prime_tower_line_width":
{
"label": "Prime Tower Line Width",
"description": "Width of a single prime tower line.",
"type": "float",
"unit": "mm",
"enabled": "prime_tower_enable",
"default_value": 0.4,
"value": "line_width",
"minimum_value": "0.001",
"minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
"maximum_value_warning": "2 * machine_nozzle_size",
"settable_per_mesh": false,
"settable_per_extruder": true
}
}
},
"initial_layer_line_width_factor":
{
"label": "Initial Layer Line Width",
"description": "Multiplier of the line width on the first layer. Increasing this could improve bed adhesion.",
"type": "float",
"unit": "%",
"default_value": 100.0,
"minimum_value": "0.001",