Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

2.4 BOM is short 3x M5x16 bolts #186

Closed
jrosen9 opened this issue Sep 15, 2020 · 2 comments
Closed

2.4 BOM is short 3x M5x16 bolts #186

jrosen9 opened this issue Sep 15, 2020 · 2 comments
Labels
BOM V2.4

Comments

@jrosen9
Copy link

jrosen9 commented Sep 15, 2020

I ran the configurator for a direct feed, 300mm with Misumi corner cubes. The produced BOM stated I needed 11 M5x16 screws. Following the manual, I have needed 14 of these of these screws
@julianschill
Copy link
Contributor

It is actually short on 4x M5x16. In the manual there are 2 on page 51, 4 on page 52, 4 on 54, and 1 for the spool holder. Then you need 4 for the bed and 16 for the frame for blind joints. That makes 31 for blind joints and 15 for corner cubes.

@a1co a1co mentioned this issue Mar 28, 2021
Closed
@julianschill
Copy link
Contributor

julianschill commented May 28, 2021 •
edited
Loading

The BOM is indeed short of 4 M5x16. Here is an image of where the M5x16 are used:
VORON2_v2 4_Assembly_v1

@RealDeuce RealDeuce mentioned this issue Sep 25, 2021
Closed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
BOM V2.4
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@FHeilmann @raymondh2 @julianschill @jrosen9