This chart installs the Mailu mail system on kubernetes
Homepage: https://mailu.io
| Chart Version | Mailu Version |
|---|---|
| 0.0.x, 0.1.x, 0.2.x | 1.8 |
| 0.3.x | 1.9.x |
| 1.x.x | 2.x |
Active development of this chart is only for the latest supported Mailu version (currently 1.9.x). Branches exists for older mailu versions (e.g. old/mailu-1.8).
⚠️ Starting with version 1.9, you need a validating DNSSEC compatible resolver in order to run Mailu.- a working HTTP/HTTPS ingress controller such as nginx or traefik
- cert-manager v0.12 or higher installed and configured (including a working cert issuer). Otherwise you will need to handle it by yourself and provide the secret to Mailu.
- A node which has a public reachable IP, static address because mail service binds directly to the node's IP
- A hosting service that allows inbound and outbound traffic on port 25.
- Helm 3 (helm 2 support is dropped with release 0.3.0).
| Repository | Name | Version |
|---|---|---|
| https://charts.bitnami.com/bitnami | common | 2.0.3 |
| https://charts.bitnami.com/bitnami | mariadb | 11.3.* |
| https://charts.bitnami.com/bitnami | postgresql | 11.9.* |
| https://charts.bitnami.com/bitnami | redis | 17.3.* |
One of the biggest mistakes when running a mail server is a so called "Open Relay". This kind of misconfiguration is in most cases caused by a badly configured load balancer which hides the originating IP address of an email which makes Mailu think, the email comes from an internal address and ommits authentification and other checks. In the result, your mail server can be abused to spread spam and will get blacklisted within hours.
It is very important that you check your setup for open relay at least:
- after installation
- at any time you change network settings or load balancer configuration
The check is quite simple:
- watch the logs for the "mailu-front" POD
- browse to an open relay checker like https://mxtoolbox.com/diagnostic.aspx
- enter the hostname or IP address of your mail server and start the test
In the logs, you should see some message like
2021/10/26 21:23:25 [info] 12#12: *25691 client 18.205.72.90:56741 connected to 0.0.0.0:25It is very important that the IP address shown here is an external public IP address, not an internal like 10.x.x.x, 192.168.x.x or 172.x.x.x.
Also verify that the result of the check confirms that there is no open relay:
SMTP Open Relay OK - Not an open relay.- Google cloud does not allow outgoing connections to connect to port 25. You will not be able to send mails with mailu on google cloud (https://googlecloudplatform.uservoice.com/forums/302595-compute-engine/suggestions/12422808-please-unblock-port-25-allow-outbound-mail-connec)
- Many cloud providers don't allow to assign fixed IPs directly to nodes. They use proxies or load balancers instead. While this works well with HTTP/HTTPs, on raw TCP connections (such as mail protocol connections) the originating IP get's lost. There's a so called "proxy protocol" as a solution for this limitation but that's not yet supported by mailu (due the lack of support in the nginx mail modules). Without the original IP information, a mail server will not work properly, or worse, will be an open relay.
- If you'd like to run mailu on kubernetes, consider to rent a cheap VPS and run kuberneres on it (e.g. using rancher2). A good option is to use hetzner cloud VPS (author's personal opinion).
- Please don't open issues in the bug tracker if your mail server is not working because your cloud provider blocks port 25 or hides source ip addresses behind a load balancer.
- Add the repository via:
helm repo add mailu https://mailu.github.io/helm-charts/- create a local values file:
helm show values mailu/mailu > my-values-file.yamlEdit the my-values-file.yaml to reflect your environment.
- deploy the helm-chart with:
helm install mailu mailu/mailu -n mailu-mailserver --values my-values-file.yaml- Uninstall the helm-chart with:
helm uninstall mailu --namespace=mailu-mailserverCheck that the deployed pods are all running.
| Name | Description | Value |
|---|---|---|
global.imageRegistry |
Global container image registry | "" |
global.imagePullSecrets |
Global container image pull secret | [] |
global.storageClass |
Global storageClass to use for persistent volumes | "" |
global.database.roundcube.database |
Name of the roundcube database | roundcube |
global.database.roundcube.username |
Username to use for the roundcube database | roundcube |
global.database.roundcube.password |
Password to use for the roundcube database | "" |
global.database.roundcube.existingSecret |
Name of an existing secret to use for the roundcube database | "" |
global.database.roundcube.existingSecretPasswordKey |
Name of the key in the existing secret to use for the roundcube database password | "" |
| Name | Description | Value |
|---|---|---|
kubeVersion |
Force target Kubernetes version (using Helm capabilities if not set) | "" |
nameOverride |
String to partially override mailu.fullname include (will maintain the release name) | "" |
fullnameOverride |
String to fully override mailu.fullname template | "" |
commonLabels |
Add labels to all the deployed resources | {} |
commonAnnotations |
Add annotations to all the deployed resources | {} |
tolerations |
Tolerations for pod assignment | [] |
affinity |
Affinity for pod assignment | {} |
imageRegistry |
Container registry to use for all Mailu images | ghcr.io |
| Name | Description | Value |
|---|---|---|
hostnames |
List of hostnames to generate certificates and ingresses for. The first will be used as primary mail hostname. | [] |
domain |
Mail domain name. See https://github.com/Mailu/Mailu/blob/master/docs/faq.rst#what-is-the-difference-between-domain-and-hostnames | "" |
secretKey |
The secret key is required for protecting authentication cookies and must be set individually for each deployment | "" |
existingSecret |
Name of the existing secret to retrieve the secretKey. | "" |
timezone |
Timezone to use for the containers | Etc/UTC |
initialAccount.enabled |
Enable the creation of the initial account | false |
initialAccount.username |
Username of the initial account | "" |
initialAccount.domain |
Domain of the initial account | "" |
initialAccount.password |
Password of the initial account; ignored if using existing secret; if empty, a random password will be generated and saved in a secret | "" |
initialAccount.existingSecret |
Name of the existing secret to retrieve the initial account's password | "" |
initialAccount.existingSecretPasswordKey |
Name of the key in the existing secret to use for the initial account's password | "" |
initialAccount.mode |
How to treat the creationg of the initial account. Possible values: "create", "update" or "ifmissing" | update |
subnet |
Change this if you're using different address ranges for pods (IPv4) | 10.42.0.0/16 |
subnet6 |
Change this if you're using different address ranges for pods (IPv6) | "" |
networkPolicy.enabled |
Enable network policy | false |
networkPolicy.ingressController.namespace |
Namespace where the ingress controller is deployed | ingress-nginx |
networkPolicy.ingressController.podSelector |
Selector for the ingress controller pods | `matchLabels: |
| app.kubernetes.io/name: ingress-nginx | ||
| app.kubernetes.io/instance: ingress-nginx | ||
| app.kubernetes.io/component: controller | ||
| ` | ||
mailuVersion |
Override Mailu version to be deployed (tag of mailu images). Defaults to Chart.AppVersion - must be master or a version >= 2.0 |
"" |
logLevel |
default log level. can be overridden globally or per service | WARNING |
postmaster |
local part of the postmaster email address (Mailu will use @$DOMAIN as domain part) | postmaster |
recipientDelimiter |
The delimiter used to separate local part from extension in recipient addresses | + |
dmarc.rua |
Local part of the DMARC report email address (Mailu will use @$DOMAIN as domain part) | "" |
dmarc.ruf |
Local part of the DMARC failure report email address (Mailu will use @$DOMAIN as domain part) | "" |
limits.messageSizeLimitInMegabytes |
Maximum size of an email in megabytes | 50 |
limits.authRatelimit.ip |
Sets the AUTH_RATELIMIT_IP environment variable in the admin pod |
60/hour |
limits.authRatelimit.ipv4Mask |
Sets the AUTH_RATELIMIT_IP_V4_MASK environment variable in the admin pod |
24 |
limits.authRatelimit.ipv6Mask |
Sets the AUTH_RATELIMIT_IP_V6_MASK environment variable in the admin pod |
56 |
limits.authRatelimit.user |
Sets the AUTH_RATELIMIT_USER environment variable in the admin pod |
100/day |
limits.authRatelimit.exemptionLength |
Sets the AUTH_RATELIMIT_EXEMPTION_LENGTH environment variable in the admin pod |
86400 |
limits.authRatelimit.exemption |
Sets the AUTH_RATELIMIT_EXEMPTION environment variable in the admin pod |
"" |
limits.messageRatelimit.value |
Sets the MESSAGE_RATELIMIT environment variable in the admin pod |
200/day |
limits.messageRatelimit.exemption |
Sets the MESSAGE_RATELIMIT_EXEMPTION environment variable in the admin pod |
"" |
externalRelay.host |
Hostname of the external relay | "" |
externalRelay.username |
Username for the external relay | "" |
externalRelay.password |
Password for the external relay | "" |
externalRelay.existingSecret |
Name of the secret containing the username and password for the external relay; if set, username and password will be ignored | "" |
externalRelay.usernameKey |
Key in the secret containing the username for the external relay | relay-username |
externalRelay.passwordKey |
Key in the secret containing the password for the external relay | relay-password |
externalRelay.networks |
List of networks that are allowed to use Mailu as external relay | [] |
clusterDomain |
Kubernetes cluster domain name | cluster.local |
credentialRounds |
Number of rounds to use for password hashing | 12 |
sessionCookieSecure |
Controls the secure flag on the cookies of the administrative interface. | true |
sessionTimeout |
Maximum amount of time in seconds between requests before a session is invalidated | 3600 |
permanentSessionLifetime |
Maximum amount of time in seconds a session can be kept alive for if it hasn’t timed-out | 2592000 |
letsencryptShortchain |
Controls whether we send the ISRG Root X1 certificate in TLS handshakes. | false |
customization.siteName |
Website name | Mailu |
customization.website |
URL of the website | https://mailu.io |
customization.logoUrl |
Sets a URL for a custom logo. This logo replaces the Mailu logo in the topleft of the main admin interface. | "" |
customization.logoBackground |
Sets a custom background colour for the brand logo in the top left of the main admin interface. | "" |
welcomeMessage.enabled |
Enable welcome message | true |
welcomeMessage.subject |
Subject of the welcome message | Welcome to Mailu |
welcomeMessage.body |
Body of the welcome message | Welcome to Mailu, your new email service. Please change your password and update your profile. |
wildcardSenders |
List of user emails that can send emails from any address | [] |
tls.outboundLevel |
Sets the OUTBOUND_TLS_LEVEL environment variable |
"" |
tls.deferOnError |
Sets the DEFER_ON_TLS_ERROR environment variable |
"" |
tls.inboundEnforce |
Sets the INBOUND_TLS_ENFORCE environment variable |
"" |
| Name | Description | Value |
|---|---|---|
externalDatabase.enabled |
Set to true to use an external database | false |
externalDatabase.type |
Type of the external database for mailu and roundcube (mysql/postgresql) |
"" |
externalDatabase.host |
Hostname of the database | "" |
externalDatabase.port |
Port of the database | 3306 |
externalDatabase.database |
Name of the database | mailu |
externalDatabase.username |
Username to use for the database | mailu |
externalDatabase.password |
Password to use for the database | "" |
externalDatabase.existingSecret |
Name of the secret containing the database credentials | "" |
externalDatabase.existingSecretDatabaseKey |
Key in the secret containing the database name | database |
externalDatabase.existingSecretUsernameKey |
Key in the secret containing the database username | username |
externalDatabase.existingSecretPasswordKey |
Key in the secret containing the database password | password |
externalRedis.enabled |
Set to true to use an external Redis instance (ignored if redis.enabled is true) |
false |
externalRedis.host |
Hostname of the external Redis instance | "" |
externalRedis.port |
Port of the external Redis instance | 6379 |
externalRedis.adminQuotaDbId |
Redis database ID for the quota storage on the admin pod | 1 |
externalRedis.adminRateLimitDbId |
Redis database ID for the rate limit storage on the admin pod | 2 |
externalRedis.rspamdDbId |
Redis database ID for the rspamd storage on the rspamd pod | 0 |
database.mysql.roundcubePassword |
DEPRECATED - DO NOT USE: Password for the roundcube database | "" |
database.postgresql.roundcubePassword |
DEPRECATED - DO NOT USE: Password for the roundcube database | "" |
mariadb.enabled |
Enable MariaDB deployment | false |
mariadb.architecture |
MariaDB architecture. Allowed values: standalone or replication | standalone |
mariadb.auth.rootPassword |
Password for the root user. Ignored if existing secret is provided. |
"" |
mariadb.auth.database |
Name for a custom database to create | mailu |
mariadb.auth.username |
Name for a custom user to create | mailu |
mariadb.auth.password |
Password for the new user. Ignored if existing secret is provided | "" |
mariadb.auth.existingSecret |
Use existing secret for password details (auth.rootPassword, auth.password, auth.replicationPassword |
"" |
mariadb.primary.persistence.enabled |
Enable persistence using PVC | false |
mariadb.primary.persistence.storageClass |
PVC Storage Class for MariaDB volume | "" |
mariadb.primary.persistence.accessMode |
PVC Access Mode for MariaDB volume | ReadWriteOnce |
mariadb.primary.persistence.size |
PVC Storage Request for MariaDB volume | 8Gi |
postgresql.enabled |
Enable PostgreSQL deployment | false |
postgresql.architecture |
PostgreSQL architecture. Allowed values: standalone or replication | standalone |
postgresql.auth.enablePostgresUser |
Assign a password to the "postgres" admin user. Otherwise, remote access will be blocked for this user | true |
postgresql.auth.postgresPassword |
Password for the "postgres" admin user. Ignored if auth.existingSecret with key postgres-password is provided |
changeme |
postgresql.auth.username |
Name for a custom user to create | mailu |
postgresql.auth.password |
Password for the custom user to create. Ignored if auth.existingSecret with key password is provided |
"" |
postgresql.auth.database |
Name for a custom database to create | mailu |
postgresql.auth.existingSecret |
Use existing secret for password details (auth.postgresPassword, auth.password will be ignored and picked up from this secret). The secret has to contain the keys postgres-password and password |
"" |
postgresql.auth.secretKeys.adminPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set. |
postgres-password |
postgresql.auth.secretKeys.userPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set. |
password |
postgresql.auth.secretKeys.replicationPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set. |
replication-password |
postgresql.primary.persistence.enabled |
Enable persistence using PVC | false |
postgresql.primary.persistence.storageClass |
PVC Storage Class for PostgreSQL volume | "" |
postgresql.primary.persistence.accessMode |
PVC Access Mode for PostgreSQL volume | ReadWriteOnce |
postgresql.primary.persistence.size |
PVC Storage Request for PostgreSQL volume | 8Gi |
persistence.single_pvc |
Setings for a single volume for all apps. | true |
persistence.size |
Size of the persistent volume claim (for single PVC) | 100Gi |
persistence.accessModes |
Access mode of backing PVC (for single PVC) | ["ReadWriteOnce"] |
persistence.annotations |
Annotations for the PVC (for single PVC) | {} |
persistence.hostPath |
Path to mount the volume at on the host | "" |
persistence.existingClaim |
Name of existing PVC (for single PVC) | "" |
persistence.storageClass |
Storage class of backing PVC (for single PVC) | "" |
persistence.claimNameOverride |
Override the name of the PVC (for single PVC) | "" |
| Name | Description | Value |
|---|---|---|
ingress.enabled |
Enable external ingress | true |
ingress.ingressClassName |
IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+) | "" |
ingress.pathType |
Ingress path type | ImplementationSpecific |
ingress.apiVersion |
Force Ingress API version (automatically detected if not set) | "" |
ingress.path |
Default path for the ingress record | / |
ingress.annotations |
Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations. | {} |
ingress.tls |
Enable TLS configuration for the hosts defined at hostnames parameter |
true |
ingress.existingSecret |
Name of an existing Secret containing the TLS certificates for the Ingress | "" |
ingress.selfSigned |
Create a TLS secret for this ingress record using self-signed certificates generated by Helm | false |
ingress.extraHosts |
An array with additional hostname(s) to be covered with the ingress record | [] |
ingress.extraPaths |
An array with additional arbitrary paths that may need to be added to the ingress under the main host | [] |
ingress.extraTls |
TLS configuration for additional hostname(s) to be covered with this ingress record | [] |
ingress.secrets |
Custom TLS certificates as secrets | [] |
ingress.extraRules |
Additional rules to be covered with this ingress record | [] |
ingress.realIpHeader |
Sets the value of REAL_IP_HEADER environment variable in the front pod |
X-Forwarded-For |
ingress.realIpFrom |
Sets the value of REAL_IP_FROM environment variable in the front pod |
"" |
ingress.tlsFlavorOverride |
Overrides the value of TLS_FLAVOR environment variable in the front pod |
"" |
| Name | Description | Value |
|---|---|---|
proxyAuth.whitelist |
Comma separated list of CIDRs of proxies to trust for authentication | "" |
proxyAuth.header |
HTTP header containing the email address of the user to authenticate | X-Auth-Email |
proxyAuth.create |
Whether non-existing accounts should be auto-created | false |
| Name | Description | Value |
|---|---|---|
front.logLevel |
Override default log level | "" |
front.image.repository |
Pod image repository | mailu/nginx |
front.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
front.image.pullPolicy |
Pod image pull policy | IfNotPresent |
front.hostPort.enabled |
Expose front mail ports via hostPort | true |
front.externalService.enabled |
Expose front mail ports via external service (ClusterIP or LoadBalancer) | false |
front.externalService.type |
Service type (ClusterIP or LoadBalancer) | ClusterIP |
front.externalService.externalTrafficPolicy |
Service externalTrafficPolicy (Cluster or Local) | Local |
front.externalService.loadBalancerIP |
Service loadBalancerIP | "" |
front.externalService.annotations |
Service annotations | {} |
front.externalService.ports.pop3 |
Expose POP3 port | false |
front.externalService.ports.pop3s |
Expose POP3 port (TLS) | true |
front.externalService.ports.imap |
Expose IMAP port | false |
front.externalService.ports.imaps |
Expose IMAP port (TLS) | true |
front.externalService.ports.smtp |
Expose SMTP port | true |
front.externalService.ports.smtps |
Expose SMTP port (TLS) | true |
front.externalService.ports.submission |
Expose Submission port | true |
front.kind |
Kind of resource to create for the front (Deployment or DaemonSet) |
Deployment |
front.replicaCount |
Number of front replicas to deploy (only for Deployment kind) |
1 |
front.resources.limits |
The resources limits for the container | {} |
front.resources.requests |
The requested resources for the container | {} |
front.livenessProbe.enabled |
Enable livenessProbe | true |
front.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
front.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
front.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
front.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
front.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
front.readinessProbe.enabled |
Enable readinessProbe | true |
front.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
front.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
front.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
front.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 1 |
front.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
front.startupProbe.enabled |
Enable startupProbe | false |
front.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
front.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
front.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
front.startupProbe.failureThreshold |
Failure threshold for startupProbe | 30 |
front.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
front.podLabels |
Add extra labels to pod | {} |
front.podAnnotations |
Add extra annotations to the pod | {} |
front.nodeSelector |
Node labels selector for pod assignment | {} |
front.initContainers |
Add additional init containers to the pod | [] |
front.priorityClassName |
Pods' priorityClassName | "" |
front.podSecurityContext.enabled |
Enabled pods' Security Context | false |
front.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
front.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
front.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
front.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
front.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
front.affinity |
Affinity for front pod assignment | {} |
front.tolerations |
Tolerations for pod assignment | [] |
front.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
front.hostAliases |
Pod pod host aliases | [] |
front.schedulerName |
Name of the k8s scheduler (other than default) | "" |
front.service.annotations |
Admin service annotations | {} |
front.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
front.updateStrategy.type |
Strategy to use to update Pods | RollingUpdate |
front.extraEnvVars |
Extra environment variable to pass to the running container | [] |
front.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
front.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
front.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
front.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
admin.enabled |
Enable access to the admin interface | true |
admin.uri |
URI to access the admin interface | /admin |
admin.logLevel |
Override default log level | "" |
admin.image.repository |
Pod image repository | mailu/admin |
admin.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
admin.image.pullPolicy |
Pod image pull policy | IfNotPresent |
admin.persistence.size |
Pod pvc size | 20Gi |
admin.persistence.storageClass |
Pod pvc storage class | "" |
admin.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
admin.persistence.claimNameOverride |
Pod pvc name override | "" |
admin.persistence.annotations |
Pod pvc annotations | {} |
admin.resources.limits |
The resources limits for the container | {} |
admin.resources.requests |
The requested resources for the container | {} |
admin.livenessProbe.enabled |
Enable livenessProbe | true |
admin.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
admin.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
admin.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
admin.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
admin.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
admin.readinessProbe.enabled |
Enable readinessProbe | true |
admin.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
admin.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
admin.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
admin.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
admin.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
admin.startupProbe.enabled |
Enable startupProbe | false |
admin.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
admin.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
admin.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
admin.startupProbe.failureThreshold |
Failure threshold for startupProbe | 3 |
admin.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
admin.podLabels |
Add extra labels to pod | {} |
admin.podAnnotations |
Add extra annotations to the pod | {} |
admin.nodeSelector |
Node labels selector for pod assignment | {} |
admin.initContainers |
Add additional init containers to the pod | [] |
admin.priorityClassName |
Pods' priorityClassName | "" |
admin.podSecurityContext.enabled |
Enabled pods' Security Context | false |
admin.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
admin.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
admin.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
admin.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
admin.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
admin.affinity |
Affinity for admin pod assignment | {} |
admin.tolerations |
Tolerations for pod assignment | [] |
admin.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
admin.hostAliases |
Pod pod host aliases | [] |
admin.schedulerName |
Name of the k8s scheduler (other than default) | "" |
admin.service.annotations |
Admin service annotations | {} |
admin.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
admin.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
admin.extraEnvVars |
Extra environment variable to pass to the running container | [] |
admin.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
admin.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
admin.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
admin.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
redis.enabled |
Enable redis deployment through the redis subchart | true |
redis.architecture |
Redis architecture. Allowed values: standalone or replication |
standalone |
redis.auth.enabled |
DON'T CHANGE THIS VALUE. Mailu doesn't support Redis authentication | false |
redis.master.enabled |
DON'T CHANGE THIS VALUE. Enable redis master | true |
redis.master.count |
Number of redis master replicas | 1 |
redis.master.persistence.enabled |
Enable persistence using Persistent Volume Claims | true |
redis.master.persistence.size |
Pod pvc size | 8Gi |
redis.master.persistence.storageClass |
Pod pvc storage class | "" |
redis.master.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
redis.master.persistence.annotations |
Pod pvc annotations | {} |
redis.master.persistence.existingClaim |
Pod pvc existing claim; necessary if using single_pvc | "" |
redis.master.persistence.subPath |
Subpath in PVC; necessary if using single_pvc (set it to /redis) |
"" |
redis.replica.count |
Number of redis replicas (only if redis.architecture=replication) |
0 |
| Name | Description | Value |
|---|---|---|
postfix.logLevel |
Override default log level | "" |
postfix.image.repository |
Pod image repository | mailu/postfix |
postfix.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
postfix.image.pullPolicy |
Pod image pull policy | IfNotPresent |
postfix.persistence.size |
Pod pvc size | 20Gi |
postfix.persistence.storageClass |
Pod pvc storage class | "" |
postfix.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
postfix.persistence.claimNameOverride |
Pod pvc name override | "" |
postfix.persistence.annotations |
Pod pvc annotations | {} |
postfix.resources.limits |
The resources limits for the container | {} |
postfix.resources.requests |
The requested resources for the container | {} |
postfix.livenessProbe.enabled |
Enable livenessProbe | true |
postfix.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
postfix.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
postfix.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
postfix.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
postfix.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
postfix.readinessProbe.enabled |
Enable readinessProbe | true |
postfix.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
postfix.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
postfix.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
postfix.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
postfix.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
postfix.startupProbe.enabled |
Enable startupProbe | true |
postfix.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
postfix.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
postfix.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
postfix.startupProbe.failureThreshold |
Failure threshold for startupProbe | 30 |
postfix.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
postfix.podLabels |
Add extra labels to pod | {} |
postfix.podAnnotations |
Add extra annotations to the pod | {} |
postfix.nodeSelector |
Node labels selector for pod assignment | {} |
postfix.initContainers |
Add additional init containers to the pod | [] |
postfix.priorityClassName |
Pods' priorityClassName | "" |
postfix.podSecurityContext.enabled |
Enabled pods' Security Context | false |
postfix.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
postfix.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
postfix.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
postfix.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
postfix.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
postfix.affinity |
Affinity for postfix pod assignment | {} |
postfix.tolerations |
Tolerations for pod assignment | [] |
postfix.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
postfix.hostAliases |
Pod pod host aliases | [] |
postfix.schedulerName |
Name of the k8s scheduler (other than default) | "" |
postfix.service.annotations |
Admin service annotations | {} |
postfix.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
postfix.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
postfix.extraEnvVars |
Extra environment variable to pass to the running container | [] |
postfix.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
postfix.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
postfix.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
postfix.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
postfix.overrides |
Enable postfix overrides | {} |
| Name | Description | Value |
|---|---|---|
dovecot.enabled |
Enable dovecot | true |
dovecot.logLevel |
Override default log level | "" |
dovecot.image.repository |
Pod image repository | mailu/dovecot |
dovecot.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
dovecot.image.pullPolicy |
Pod image pull policy | IfNotPresent |
dovecot.persistence.size |
Pod pvc size | 20Gi |
dovecot.persistence.storageClass |
Pod pvc storage class | "" |
dovecot.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
dovecot.persistence.claimNameOverride |
Pod pvc name override | "" |
dovecot.persistence.annotations |
Pod pvc annotations | {} |
dovecot.resources.limits |
The resources limits for the container | {} |
dovecot.resources.requests |
The requested resources for the container | {} |
dovecot.livenessProbe.enabled |
Enable livenessProbe | true |
dovecot.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
dovecot.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
dovecot.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
dovecot.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
dovecot.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 10 |
dovecot.readinessProbe.enabled |
Enable readinessProbe | true |
dovecot.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
dovecot.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
dovecot.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 10 |
dovecot.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
dovecot.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
dovecot.startupProbe.enabled |
Enable startupProbe | false |
dovecot.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
dovecot.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
dovecot.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 10 |
dovecot.startupProbe.failureThreshold |
Failure threshold for startupProbe | 3 |
dovecot.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
dovecot.podLabels |
Add extra labels to pod | {} |
dovecot.podAnnotations |
Add extra annotations to the pod | {} |
dovecot.nodeSelector |
Node labels selector for pod assignment | {} |
dovecot.initContainers |
Add additional init containers to the pod | [] |
dovecot.priorityClassName |
Pods' priorityClassName | "" |
dovecot.podSecurityContext.enabled |
Enabled pods' Security Context | false |
dovecot.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
dovecot.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
dovecot.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
dovecot.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
dovecot.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
dovecot.affinity |
Affinity for dovecot pod assignment | {} |
dovecot.tolerations |
Tolerations for pod assignment | [] |
dovecot.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
dovecot.hostAliases |
Pod pod host aliases | [] |
dovecot.schedulerName |
Name of the k8s scheduler (other than default) | "" |
dovecot.service.annotations |
Admin service annotations | {} |
dovecot.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
dovecot.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
dovecot.extraEnvVars |
Extra environment variable to pass to the running container | [] |
dovecot.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
dovecot.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
dovecot.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
dovecot.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
dovecot.overrides |
Enable dovecot overrides | {} |
dovecot.compression |
Maildir compression algorithm (gz, bz2, lz4, zstd) | "" |
dovecot.compressionLevel |
Maildir compression level (1-9) | 6 |
| Name | Description | Value |
|---|---|---|
rspamd.overrides |
Enable rspamd overrides | {} |
rspamd.antivirusAction |
Action to take when an virus is detected. Possible values: reject or discard |
discard |
rspamd.logLevel |
Override default log level | "" |
rspamd.image.repository |
Pod image repository | mailu/rspamd |
rspamd.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
rspamd.image.pullPolicy |
Pod image pull policy | IfNotPresent |
rspamd.persistence.size |
Pod pvc size | 1Gi |
rspamd.persistence.storageClass |
Pod pvc storage class | "" |
rspamd.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
rspamd.persistence.claimNameOverride |
Pod pvc name override | "" |
rspamd.persistence.annotations |
Pod pvc annotations | {} |
rspamd.resources.limits |
The resources limits for the container | {} |
rspamd.resources.requests |
The requested resources for the container | {} |
rspamd.livenessProbe.enabled |
Enable livenessProbe | true |
rspamd.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
rspamd.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
rspamd.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
rspamd.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
rspamd.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
rspamd.readinessProbe.enabled |
Enable readinessProbe | true |
rspamd.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
rspamd.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
rspamd.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
rspamd.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
rspamd.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
rspamd.startupProbe.enabled |
Enable startupProbe | true |
rspamd.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
rspamd.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
rspamd.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
rspamd.startupProbe.failureThreshold |
Failure threshold for startupProbe | 90 |
rspamd.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
rspamd.podLabels |
Add extra labels to pod | {} |
rspamd.podAnnotations |
Add extra annotations to the pod | {} |
rspamd.nodeSelector |
Node labels selector for pod assignment | {} |
rspamd.initContainers |
Add additional init containers to the pod | [] |
rspamd.priorityClassName |
Pods' priorityClassName | "" |
rspamd.podSecurityContext.enabled |
Enabled pods' Security Context | false |
rspamd.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
rspamd.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
rspamd.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
rspamd.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
rspamd.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
rspamd.affinity |
Affinity for rspamd pod assignment | {} |
rspamd.tolerations |
Tolerations for pod assignment | [] |
rspamd.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
rspamd.hostAliases |
Pod pod host aliases | [] |
rspamd.schedulerName |
Name of the k8s scheduler (other than default) | "" |
rspamd.service.annotations |
Admin service annotations | {} |
rspamd.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
rspamd.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
rspamd.extraEnvVars |
Extra environment variable to pass to the running container | [] |
rspamd.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
rspamd.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
rspamd.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
rspamd.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
clamav.enabled |
Enable ClamAV | true |
clamav.logLevel |
Override default log level | "" |
clamav.image.repository |
Pod image repository | mailu/clamav |
clamav.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
clamav.image.pullPolicy |
Pod image pull policy | IfNotPresent |
clamav.persistence.enabled |
Enable persistence using PVC | true |
clamav.persistence.size |
Pod pvc size | 2Gi |
clamav.persistence.storageClass |
Pod pvc storage class | "" |
clamav.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
clamav.persistence.annotations |
Pod pvc annotations | {} |
clamav.persistence.labels |
Pod pvc labels | {} |
clamav.persistence.selector |
Additional labels to match for the PVC | {} |
clamav.persistence.dataSource |
Custom PVC data source | {} |
clamav.persistence.existingClaim |
Use a existing PVC which must be created manually before bound | "" |
clamav.resources.limits |
The resources limits for the container | {} |
clamav.resources.requests |
The requested resources for the container | {} |
clamav.livenessProbe.enabled |
Enable livenessProbe | true |
clamav.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
clamav.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
clamav.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
clamav.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
clamav.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
clamav.readinessProbe.enabled |
Enable readinessProbe | true |
clamav.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
clamav.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
clamav.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
clamav.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
clamav.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
clamav.startupProbe.enabled |
Enable startupProbe | false |
clamav.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
clamav.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
clamav.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
clamav.startupProbe.failureThreshold |
Failure threshold for startupProbe | 60 |
clamav.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
clamav.podLabels |
Add extra labels to pod | {} |
clamav.podAnnotations |
Add extra annotations to the pod | {} |
clamav.nodeSelector |
Node labels selector for pod assignment | {} |
clamav.initContainers |
Add additional init containers to the pod | [] |
clamav.priorityClassName |
Pods' priorityClassName | "" |
clamav.podSecurityContext.enabled |
Enabled pods' Security Context | false |
clamav.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
clamav.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
clamav.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
clamav.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
clamav.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
clamav.affinity |
Affinity for clamav pod assignment | {} |
clamav.tolerations |
Tolerations for pod assignment | [] |
clamav.hostAliases |
Pod pod host aliases | [] |
clamav.schedulerName |
Name of the k8s scheduler (other than default) | "" |
clamav.service.annotations |
Admin service annotations | {} |
clamav.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
clamav.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
clamav.extraEnvVars |
Extra environment variable to pass to the running container | [] |
clamav.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
clamav.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
clamav.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
clamav.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
webmail.enabled |
Enable deployment of Roundcube webmail | true |
webmail.uri |
URI to access Roundcube webmail | /webmail |
webmail.type |
Type of webmail to deploy (roundcube or snappymail) |
roundcube |
webmail.roundcubePlugins |
List of Roundcube plugins to enable | ["archive","zipdownload","markasjunk","managesieve","enigma","carddav","mailu"] |
webmail.logLevel |
Override default log level | "" |
webmail.image.repository |
Pod image repository | mailu/webmail |
webmail.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
webmail.image.pullPolicy |
Pod image pull policy | IfNotPresent |
webmail.persistence.size |
Pod pvc size | 20Gi |
webmail.persistence.storageClass |
Pod pvc storage class | "" |
webmail.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
webmail.persistence.claimNameOverride |
Pod pvc name override | "" |
webmail.persistence.annotations |
Pod pvc annotations | {} |
webmail.resources.limits |
The resources limits for the container | {} |
webmail.resources.requests |
The requested resources for the container | {} |
webmail.livenessProbe.enabled |
Enable livenessProbe | true |
webmail.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
webmail.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
webmail.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
webmail.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
webmail.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
webmail.readinessProbe.enabled |
Enable readinessProbe | true |
webmail.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
webmail.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
webmail.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
webmail.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
webmail.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
webmail.startupProbe.enabled |
Enable startupProbe | false |
webmail.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
webmail.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
webmail.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
webmail.startupProbe.failureThreshold |
Failure threshold for startupProbe | 3 |
webmail.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
webmail.podLabels |
Add extra labels to pod | {} |
webmail.podAnnotations |
Add extra annotations to the pod | {} |
webmail.nodeSelector |
Node labels selector for pod assignment | {} |
webmail.initContainers |
Add additional init containers to the pod | [] |
webmail.priorityClassName |
Pods' priorityClassName | "" |
webmail.podSecurityContext.enabled |
Enabled pods' Security Context | false |
webmail.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
webmail.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
webmail.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
webmail.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
webmail.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
webmail.affinity |
Affinity for webmail pod assignment | {} |
webmail.tolerations |
Tolerations for pod assignment | [] |
webmail.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
webmail.hostAliases |
Pod pod host aliases | [] |
webmail.schedulerName |
Name of the k8s scheduler (other than default) | "" |
webmail.service.annotations |
Admin service annotations | {} |
webmail.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
webmail.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
webmail.extraEnvVars |
Extra environment variable to pass to the running container | [] |
webmail.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
webmail.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
webmail.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
webmail.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
webdav.enabled |
Enable deployment of WebDAV server (using Radicale) | false |
webdav.logLevel |
Override default log level | "" |
webdav.image.repository |
Pod image repository | mailu/radicale |
webdav.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
webdav.image.pullPolicy |
Pod image pull policy | IfNotPresent |
webdav.persistence.size |
Pod pvc size | 20Gi |
webdav.persistence.storageClass |
Pod pvc storage class | "" |
webdav.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
webdav.persistence.claimNameOverride |
Pod pvc name override | "" |
webdav.persistence.annotations |
Pod pvc annotations | {} |
webdav.resources.limits |
The resources limits for the container | {} |
webdav.resources.requests |
The requested resources for the container | {} |
webdav.livenessProbe.enabled |
Enable livenessProbe | true |
webdav.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
webdav.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
webdav.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
webdav.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
webdav.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
webdav.readinessProbe.enabled |
Enable readinessProbe | true |
webdav.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
webdav.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
webdav.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
webdav.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
webdav.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
webdav.startupProbe.enabled |
Enable startupProbe | false |
webdav.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
webdav.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
webdav.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
webdav.startupProbe.failureThreshold |
Failure threshold for startupProbe | 3 |
webdav.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
webdav.podLabels |
Add extra labels to pod | {} |
webdav.podAnnotations |
Add extra annotations to the pod | {} |
webdav.nodeSelector |
Node labels selector for pod assignment | {} |
webdav.initContainers |
Add additional init containers to the pod | [] |
webdav.priorityClassName |
Pods' priorityClassName | "" |
webdav.podSecurityContext.enabled |
Enabled pods' Security Context | false |
webdav.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
webdav.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
webdav.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
webdav.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
webdav.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
webdav.affinity |
Affinity for webdav pod assignment | {} |
webdav.tolerations |
Tolerations for pod assignment | [] |
webdav.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
webdav.hostAliases |
Pod pod host aliases | [] |
webdav.schedulerName |
Name of the k8s scheduler (other than default) | "" |
webdav.service.annotations |
Admin service annotations | {} |
webdav.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
webdav.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
webdav.extraEnvVars |
Extra environment variable to pass to the running container | [] |
webdav.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
webdav.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
webdav.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
webdav.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
fetchmail.enabled |
Enable deployment of fetchmail | false |
fetchmail.delay |
Delay between fetchmail runs | 600 |
fetchmail.logLevel |
Override default log level | "" |
fetchmail.image.repository |
Pod image repository | mailu/fetchmail |
fetchmail.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
fetchmail.image.pullPolicy |
Pod image pull policy | IfNotPresent |
fetchmail.persistence.size |
Pod pvc size | 20Gi |
fetchmail.persistence.storageClass |
Pod pvc storage class | "" |
fetchmail.persistence.accessModes |
Pod pvc access modes | ["ReadWriteOnce"] |
fetchmail.persistence.claimNameOverride |
Pod pvc name override | "" |
fetchmail.persistence.annotations |
Pod pvc annotations | {} |
fetchmail.resources.limits |
The resources limits for the container | {} |
fetchmail.resources.requests |
The requested resources for the container | {} |
fetchmail.livenessProbe.enabled |
Enable livenessProbe | true |
fetchmail.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
fetchmail.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
fetchmail.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
fetchmail.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
fetchmail.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 1 |
fetchmail.readinessProbe.enabled |
Enable readinessProbe | true |
fetchmail.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
fetchmail.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
fetchmail.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 1 |
fetchmail.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
fetchmail.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
fetchmail.startupProbe.enabled |
Enable startupProbe | false |
fetchmail.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
fetchmail.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
fetchmail.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
fetchmail.startupProbe.failureThreshold |
Failure threshold for startupProbe | 3 |
fetchmail.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
fetchmail.podLabels |
Add extra labels to pod | {} |
fetchmail.podAnnotations |
Add extra annotations to the pod | {} |
fetchmail.nodeSelector |
Node labels selector for pod assignment | {} |
fetchmail.initContainers |
Add additional init containers to the pod | [] |
fetchmail.priorityClassName |
Pods' priorityClassName | "" |
fetchmail.podSecurityContext.enabled |
Enabled pods' Security Context | false |
fetchmail.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
fetchmail.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
fetchmail.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
fetchmail.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
fetchmail.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
fetchmail.affinity |
Affinity for fetchmail pod assignment | {} |
fetchmail.tolerations |
Tolerations for pod assignment | [] |
fetchmail.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
fetchmail.hostAliases |
Pod pod host aliases | [] |
fetchmail.schedulerName |
Name of the k8s scheduler (other than default) | "" |
fetchmail.service.annotations |
Admin service annotations | {} |
fetchmail.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
fetchmail.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
fetchmail.extraEnvVars |
Extra environment variable to pass to the running container | [] |
fetchmail.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
fetchmail.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
fetchmail.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
fetchmail.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
| Name | Description | Value |
|---|---|---|
oletools.enabled |
Enable OLETools | true |
oletools.logLevel |
Override default log level | "" |
oletools.image.repository |
Pod image repository | mailu/oletools |
oletools.image.tag |
Pod image tag (defaults to mailuVersion if set, otherwise Chart.AppVersion) | "" |
oletools.image.pullPolicy |
Pod image pull policy | IfNotPresent |
oletools.resources.limits |
The resources limits for the container | {} |
oletools.resources.requests |
The requested resources for the container | {} |
oletools.livenessProbe.enabled |
Enable livenessProbe | true |
oletools.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 3 |
oletools.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 10 |
oletools.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
oletools.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
oletools.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
oletools.readinessProbe.enabled |
Enable readinessProbe | true |
oletools.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 10 |
oletools.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
oletools.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
oletools.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 3 |
oletools.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
oletools.startupProbe.enabled |
Enable startupProbe | false |
oletools.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
oletools.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
oletools.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 5 |
oletools.startupProbe.failureThreshold |
Failure threshold for startupProbe | 3 |
oletools.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
oletools.podLabels |
Add extra labels to pod | {} |
oletools.podAnnotations |
Add extra annotations to the pod | {} |
oletools.nodeSelector |
Node labels selector for pod assignment | {} |
oletools.initContainers |
Add additional init containers to the pod | [] |
oletools.priorityClassName |
Pods' priorityClassName | "" |
oletools.podSecurityContext.enabled |
Enabled pods' Security Context | false |
oletools.podSecurityContext.fsGroup |
Set pods' Security Context fsGroup | 1001 |
oletools.containerSecurityContext.enabled |
Enabled containers' Security Context | false |
oletools.containerSecurityContext.runAsUser |
Set containers' Security Context runAsUser | 1001 |
oletools.containerSecurityContext.runAsNonRoot |
Set container's Security Context runAsNonRoot | false |
oletools.terminationGracePeriodSeconds |
In seconds, time given to the pod to terminate gracefully | 2 |
oletools.affinity |
Affinity for oletools pod assignment | {} |
oletools.tolerations |
Tolerations for pod assignment | [] |
oletools.revisionHistoryLimit |
Configure the revisionHistoryLimit of the deployment | 3 |
oletools.hostAliases |
Pod pod host aliases | [] |
oletools.schedulerName |
Name of the k8s scheduler (other than default) | "" |
oletools.service.annotations |
oletools service annotations | {} |
oletools.topologySpreadConstraints |
Topology Spread Constraints for pod assignment | [] |
oletools.updateStrategy.type |
Can be set to RollingUpdate or OnDelete | RollingUpdate |
oletools.extraEnvVars |
Extra environment variable to pass to the running container | [] |
oletools.extraEnvVarsCM |
Name of existing ConfigMap containing extra environment variables to mount in the pod | "" |
oletools.extraEnvVarsSecret |
Name of existing Secret containing extra environment variables to mount in the pod | "" |
oletools.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the pod | [] |
oletools.extraVolumes |
Optionally specify extra list of additional volumes for the pod(s) | [] |
domain: mail.mydomain.com
hostnames:
- mail.mydomain.com
initialAccount:
domain: mail.mydomain.com
password: chang3m3!
username: mailadmin
logLevel: INFO
limits:
authRatelimit:
ip: 100/minute;3600/hour
user: 100/day
messageSizeLimitInMegabytes: 200
persistence:
size: 100Gi
storageClass: fast
secretKey: chang3m3!If persistence.hostPath is set, a path on the host is used for persistence. This overrides all other persistence options.
If persistence.existingClaim is set, no PVC is created and the existing PVC with the given name is being used.
This can be configured on an individual basis for each Mailu component as well.
If neither persistence.hostPath nor persistence.existingClaim is set, a new PVC is created. The name of the claim is generated but it
can be overridden with persistence.claimNameOverride.
The persistence.storageClass is not set by default. It can be set to - to have an empty storageClassName or to anything else depending on your setup.
If you use only one PVC for all components and you have multiple nodes, ensure that you set persistence.accessMode to ReadWriteMany (and that your storage class supports it).
It's very likely that your PODs run on a different subnet than the default 10.42.0.0/16. Set the subnet value to the correct subnet and try again.
Warning: For security reasons, make sure that the subnet value is scoped only to the resources that belongs to your cluster. Do not use a subnet that is too large as any IP within the subnet would have extended rights to send emails, bypassing some security controls and potentially making your installation an open relay.
Depending on your environment you might want to shedule "only one pod" (Deployment) or "one pod per node" (DaemonSet) for the front nginx pod(s).
A DaemonSet can e.g. be usefull if you have multiple DNS entries / IPs in your MX record and want front to be reachable on every IP.
This can be set with the front.kind value.
Beware that if using a DaemonSet you'll need a storage class that supports ReadWriteMany access mode.
The default ingress is handled externally. In some situations, this is problematic, such as when webmail should be accessible on the same address as the exposed ports. Kubernetes services cannot provide such capabilities without vendor-specific annotations.
By setting ingress.enabled to false, the internal NGINX instance provided by front will configure TLS according to
ingress.tlsFlavorOverride and redirect http scheme connections to https.
CAUTION: This configuration exposes /admin to all clients with access to the web UI.
The default logic is to use Cert Manager to generate certificate for Mailu via Ingress annotations (ingress.annotations={}).
In some configuration you want to handle certificate generation and update another way, use ingress.existingSecret=NAME_OF_EXISTING_SECRET to let the Chart know where to find certificates managed externally.
You will have to create and keep up-to-date your TLS keys.
By default both, Mailu and RoundCube uses an embedded SQLite database.
The chart allows to deploy a MariaDB or a PostgresQL database.
You can also make use of an existing database by setting the correct under externalDatabase.
This chart can deploy a MariaDB instance (using Bitnami's Helm Chart dependency) and configure it for Mailu to use it.
In order to do so, set mariadb.enabled to true.
The root and mailu passwords will be automatically generated by default and stored in a secret.
Make sure to also set mariadb.primary.persistence.enabled to true and configure it accordingly.
See Bitnami's MariaDB Helm Chart for more configuration options (to be configured under the mailu key in your values.yaml file).
This chart can deploy a Postgresql instance (using Bitnami's Helm Chart dependency) and configure it for Mailu to use it.
In order to do so, set postgresql.enabled to true.
The postgres and mailu passwords will be automatically generated by default and stored in a secret.
Make sure to also set postgresql.primary.persistence.enabled to true and configure it accordingly.
See Bitnami's Postgresql Helm Chart for more configuration options (to be configured under the mailu key in your values.yaml file).
An external MariaDB / MySQL or Postgresql database can be used by setting externalDatabase.enabled to true.
The connection settings to the external database needs to be configured under externalDatabase.
The roundcube database settings can be moified via global.database.roundcube (database name, username, password).
By default, no timezone is set to the PODS, so logs and mail timestamps are all UTC. The option timezone allows to use specify a time zone to use (e.g. Europe/Berlin).
Note that this requires timezone data installed on the host filesystem that will be mounted into pods as localtime. When Mailu/Mailu#1154 is solved, the chart will be modified to use this solution instead of host files.
There are several ways to expose mail ports to the public. If you do so, make sure you read and understand the warning above about open relays.
This is the most straightforward way to run mailu. It can be used when the node where mailu (or at least the "front" POD) runs on a specific node that has a public ip address which is used for mail. All mail ports of the "front" POD will be simply exposed via the "hostPort" function.
To use this mode, set front.hostPort.enabled to true (which is the default). If your cluster has multiple nodes, you should use front.nodeSelector to bind the front container on the node where your public mail IP is located on.
If you run on bare metal with k3s (e.g by using k3os), you can use the build-in load balancer klipper-lb. To expose mailu via loadBalancer, set:
front.hostPort.enabled:falseexternalService.enabled:trueexternalService.type:LoadBalancerexternalService.externalTrafficPolicy:Local
The externalTrafficPolicy is important to preserve the client's source IP and avoid an open relay.
Please perform open relay tests after setup as described above!
The table below lists the environment variables that will be passed to the pods and their respective configuration path in the values.yaml file.
| Mailu env var | values.yaml config path |
Comment | Default value (Mailu 'docker' version) | Helm default value |
|---|---|---|---|---|
ADMIN |
admin.enabled |
none |
true |
|
ANTIVIRUS_ACTION |
rspamd.antivirusAction |
discard |
discard |
|
AUTH_RATELIMIT_EXEMPTION_LENGTH |
limits.authRatelimit.exemptionLength |
86400 |
86400 |
|
AUTH_RATELIMIT_EXEMPTION |
limits.authRatelimit.exemption |
`` | `` | |
AUTH_RATELIMIT_IP |
limits.authRatelimit.ip |
60/hour |
60/hour |
|
AUTH_RATELIMIT_IP_V4_MASK |
limits.authRatelimit.ipv4Mask |
24 |
24 |
|
AUTH_RATELIMIT_IP_V6_MASK |
limits.authRatelimit.ipv6Mask |
56 |
56 |
|
AUTH_RATELIMIT_USER |
limits.authRatelimit.user |
100/day |
100/day |
|
BABEL_DEFAULT_LOCALE |
- | en |
en |
|
BABEL_DEFAULT_TIMEZONE |
- | UTC |
UTC |
|
BOOTSTRAP_SERVE_LOCAL |
- | True |
True |
|
CREDENTIAL_ROUNDS |
credentialRounds |
12 |
12 |
|
DB_FLAVOR |
Managed by Helm chart | None | ||
DB_HOST |
Managed by Helm chart | database | ||
DB_NAME |
Managed by Helm chart | mailu | ||
DB_PW |
Managed by Helm chart | None | ||
DB_USER |
Managed by Helm chart | mailu | ||
DEBUG_ASSETS |
- | `` | ||
DEBUG |
- | False |
false |
|
DEBUG_PROFILER |
- | False |
false |
|
DEBUG_TB_INTERCEPT_REDIRECTS |
- | False |
false |
|
DEFAULT_QUOTA |
- | 1000000000 |
1000000000 |
|
DEFAULT_SPAM_THRESHOLD |
- | 80 |
80 |
|
DEFER_ON_TLS_ERROR |
- | True |
true |
|
DISABLE_STATISTICS |
- | False |
false |
|
DKIM_PATH |
- | /dkim/{domain}.{selector}.key |
/dkim/{domain}.{selector}.key |
|
DKIM_SELECTOR |
- | dkim |
dkim |
|
DMARC_RUA |
dmarc.rua |
none |
none |
|
DMARC_RUF |
dmarc.ruf |
none |
none |
|
DOCKER_SOCKET |
- | Not set in Helm Chart | unix:///var/run/docker.sock |
- |
DOMAIN |
domain |
mailu.io |
unset | |
DOMAIN_REGISTRATION |
- | False |
false |
|
FETCHMAIL_ENABLED |
fetchmail.enabled |
False |
false |
|
HOSTNAMES |
hostnames |
Use an array in Helm values instead of a string | mail.mailu.io,alternative.mailu.io,yetanother.mailu.io |
[] |
INBOUND_TLS_ENFORCE |
- | False |
false |
|
INSTANCE_ID_PATH |
- | /data/instance |
/data/instance |
|
KUBERNETES_INGRESS |
- | False |
false |
|
LOG_LEVEL |
logLevel |
Can be overriden for each pod through COMPONENT.logLevel |
WARNING |
WARNING |
LOGO_BACKGROUND |
customization.logoBackground |
None |
none |
|
LOGO_URL |
customization.logoUrl |
None |
none |
|
MEMORY_SESSIONS |
ingress.enabled |
False |
true |
|
MESSAGE_RATELIMIT_EXEMPTION |
limits.messageRatelimit.exemption |
`` | `` | |
MESSAGE_RATELIMIT |
limits.messageRatelimit.value |
200/day |
200/day |
|
PERMANENT_SESSION_LIFETIME |
permanentSessionLifetime |
30*24*3600 |
2592000 |
|
POSTMASTER |
postmaster |
postmaster |
postmaster |
|
PROXY_AUTH_CREATE |
proxyAuth.create |
False |
false |
|
PROXY_AUTH_HEADER |
proxyAuth.header |
X-Auth-Email |
X-Auth-Email |
|
PROXY_AUTH_WHITELIST |
proxyAuth.whitelist |
`` | `` | |
RATELIMIT_STORAGE_URL |
- | Managed by Helm chart | `` | |
RECAPTCHA_PRIVATE_KEY |
- | `` | `` | |
RECAPTCHA_PUBLIC_KEY |
- | `` | `` | |
REAL_IP_FROM |
ingress.realIpFrom |
`` | 0.0.0.0/0 |
|
REAL_IP_HEADER |
ingress.realIpHeader |
`` | X-Forwarded-For |
|
RECIPIENT_DELIMITER |
recipientDelimiter |
`` | + |
|
REJECT_UNLISTED_RECIPIENT |
- | yes |
yes |
|
RELAYHOST |
externalRealy.host |
`` | `` | |
RELAYNETS |
externalRealy.networks |
`` | `` | |
ROUNDCUBE_DB_FLAVOR |
- | Managed by Helm chart | sqlite |
`` |
SECRET_KEY |
secretKey or existingSecret |
Auto-generated if not provided or empty | changeMe |
auto-generated |
SESSION_COOKIE_SECURE |
sessionCookieSecure |
None |
true |
|
SESSION_KEY_BITS |
- | 128 |
128 |
|
SESSION_TIMEOUT |
sessionTimeout |
3600 |
3600 |
|
SITENAME |
customization.siteName |
Mailu |
Mailu |
|
SQLALCHEMY_DATABASE_URI |
- | sqlite:////data/main.db |
sqlite:////data/main.db |
|
SQLALCHEMY_TRACK_MODIFICATIONS |
- | False |
false |
|
SQLITE_DATABASE_FILE |
- | data/main.db |
data/main.db |
|
STATS_ENDPOINT |
- | 19.{}.stats.mailu.io |
19.{}.stats.mailu.io |
|
SUBNET6 |
subnet6 |
warning: IPv6 support with Kubernetes is untested | None |
none |
SUBNET |
subnet |
192.168.203.0/24 |
10.42.0.0/16 |
|
TEMPLATES_AUTO_RELOAD |
- | True |
True |
|
TLS_FLAVOR |
ingress.tlsFlavorOverride |
cert |
cert |
|
TLS_PERMISSIVE |
- | True |
True |
|
TZ |
timezone |
Etc/UTC |
Etc/UTC |
|
WEB_ADMIN |
admin.uri |
/admin |
/admin |
|
WEBMAIL |
webmail.type |
none |
roundcube |
|
WEBSITE |
customization.website |
https://mailu.io |
https://mailu.io |
|
WEB_WEBMAIL |
webmail.uri |
/webmail |
/webmail |
|
WELCOME |
welcomeMessage.enabled |
False |
false |
|
WELCOME_BODY |
welcomeMessage.body |
Dummy welcome body |
Welcome to Mailu, your new email service. Please change your password and update your profile. |
|
WELCOME_SUBJECT |
welcomeMessage.subject |
Dummy welcome topic |
Welcome to Mailu |
|
WILDCARD_SENDERS |
- | `` | `` | |
*_ADDRESS |
- | Auto-generated by Helm chart | `` | `` |