hardware dock

The YIO Dock charges the remote and functions as an IR receiver and blaster.

YIO Dock Hardware

• USB-C connector (works with all chargers that adhering the USB-C Standard)
• IR-Receiver (located at the top, let you learn IR codes)
• 4 IR LEDs (can emit RAW & Pronto HEX IR codes)
• headphone jack (IR Extender can be connected in parallel to this Port)

Powering the YIO dock

The YIO dock has an USB-C connector and works with power supplies adhering to the USB-C standard. Make sure you use a power supply that can do 3A @ 5V.

IR capabilities

There are 4 IR LEDs and one IR receiver on the top of the dock. There is a headphone jack for connecting IR extenders. This jack is connected in parallel with the 4 IR LEDs and also has a 51 ohm resistor.

RAW and Pronto code formats are supported for IR sending.