Skip to content

Latest commit

 

History

History
66 lines (49 loc) · 2.31 KB

07043M.md

File metadata and controls

66 lines (49 loc) · 2.31 KB
title description addedAt pageClass
Immax 07043M control via MQTT
Integrate your Immax 07043M via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway.
2022-08-01 08:06:58 -0700
device-page

Immax 07043M

Model 07043M
Vendor Immax
Description Motion sensor
Exposes occupancy, battery_low, tamper, battery, linkquality
Picture Immax 07043M

Exposes

Occupancy (binary)

Indicates whether the device detected occupancy. Value can be found in the published state on the occupancy property. It's not possible to read (/get) or write (/set) this value. If value equals true occupancy is ON, if false OFF.

Battery low (binary)

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It's not possible to read (/get) or write (/set) this value. If value equals true battery low is ON, if false OFF.

Tamper (binary)

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It's not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.