Skip to content

Latest commit

 

History

History
11 lines (8 loc) · 790 Bytes

Fast-power-cycle-device-recovery.md

File metadata and controls

11 lines (8 loc) · 790 Bytes
Raw

Introduced in v6.7.1

Fast power cycle device recovery is implemented for situations where a device cannot be reset to firmware defaults (no serial access, no button). It resets all Tasmota settings (equal to Reset 1) after 4 power cycles.

SetOption65 must be set to 0 (default) in order for this feature to be enabled.

To use:

  1. Cut power from the device completely for 30 seconds
  2. Power the device on and off three times with intervals lower than 10 seconds and leave it on after fourth time
  3. Fast power cycle device recovery should activate and the device should be reset to firmware defaults

    If you flashed a precompiled binary you can reconfigure the device using the web UI.