diff --git a/adafruit_is31fl3731.py b/adafruit_is31fl3731.py
index fe978e3..35122fb 100644
--- a/adafruit_is31fl3731.py
+++ b/adafruit_is31fl3731.py
@@ -353,3 +353,16 @@ def pixel_addr(x, y):
         else:
             y = 7 - y
         return x * 16 + y
+
+
+class CharlieBonnet(Matrix):
+    """Supports the Charlieplexed bonnet"""
+    width = 16
+    height = 8
+
+    @staticmethod
+    def pixel_addr(x, y):
+        """Calulate the offset into the device array for x,y pixel"""
+        if x >= 8:
+            return (x-6) * 16 - (y + 1)
+        return (x+1) * 16 + (7 - y)
diff --git a/examples/blink.py b/examples/blink.py
index 97cfd66..8910142 100644
--- a/examples/blink.py
+++ b/examples/blink.py
@@ -2,25 +2,28 @@
 import board
 import adafruit_is31fl3731
 
+i2c = busio.I2C(board.SCL, board.SDA)
+
 # array pattern in bits; top row-> bottom row, 8 bits in each row
 an_arrow = bytearray((0x08, 0x0c, 0xfe, 0xff, 0xfe, 0x0c, 0x08, 0x00, 0x00))
 
-with busio.I2C(board.SCL, board.SDA) as i2c:
-    # initial display using Feather CharlieWing LED 15 x 7
-    display = adafruit_is31fl3731.CharlieWing(i2c)
-    # uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
-    #display = adafruit_is31fl3731.Matrix(i2c)
+# initial display using Feather CharlieWing LED 15 x 7
+display = adafruit_is31fl3731.CharlieWing(i2c)
+# uncomment next line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.Matrix(i2c)
+# uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.CharlieBonnet(i2c)
 
-    # first load the frame with the arrows; moves the an_arrow to the right in each
-    # frame
-    display.sleep(True) # turn display off while updating blink bits
-    display.fill(50)
-    for y in range(display.height):
-        row = an_arrow[y]
-        for x in range(8):
-            bit = 1 << (7-x) & row
-            if bit:
-                display.pixel(x + 4, y, None, blink=True)
+# first load the frame with the arrows; moves the an_arrow to the right in each
+# frame
+display.sleep(True) # turn display off while updating blink bits
+display.fill(0)
+for y in range(display.height):
+    row = an_arrow[y]
+    for x in range(8):
+        bit = 1 << (7-x) & row
+        if bit:
+            display.pixel(x + 4, y, 50, blink=True)
 
-    display.blink(300) # ranges from 270 to 2159; smaller the number to faster blink
-    display.sleep(False) # turn display on
+display.blink(1000) # ranges from 270 to 2159; smaller the number to faster blink
+display.sleep(False) # turn display on
diff --git a/examples/frame.py b/examples/frame.py
index e21d23e..6ff22f0 100644
--- a/examples/frame.py
+++ b/examples/frame.py
@@ -3,31 +3,35 @@
 import busio
 import adafruit_is31fl3731
 
+i2c = busio.I2C(board.SCL, board.SDA)
+
 # arrow pattern in bits; top row-> bottom row, 8 bits in each row
 arrow = bytearray((0x08, 0x0c, 0xfe, 0xff, 0xfe, 0x0c, 0x08, 0x00, 0x00))
 
-with busio.I2C(board.SCL, board.SDA) as i2c:
-    # initial display using Feather CharlieWing LED 15 x 7
-    display = adafruit_is31fl3731.CharlieWing(i2c)
-    # uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
-    #display = adafruit_is31fl3731.Matrix(i2c)
+# initial display using Feather CharlieWing LED 15 x 7
+display = adafruit_is31fl3731.CharlieWing(i2c)
+# uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.Matrix(i2c)
+# uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.CharlieBonnet(i2c)
+
 
-    # first load the frame with the arrows; moves the arrow to the right in each
-    # frame
-    display.sleep(True) # turn display off while frames are updated
+# first load the frame with the arrows; moves the arrow to the right in each
+# frame
+display.sleep(True) # turn display off while frames are updated
+for frame in range(8):
+    display.frame(frame, show=False)
+    display.fill(0)
+    for y in range(display.height):
+        row = arrow[y]
+        for x in range(8):
+            bit = 1 << (7-x) & row
+            # display the pixel into selected frame with varying intensity
+            if bit:
+                display.pixel(x + frame, y, frame**2 + 1)
+display.sleep(False)
+# now tell the display to show the frame one at time
+while True:
     for frame in range(8):
-        display.frame(frame, show=False)
-        display.fill(0)
-        for y in range(display.height):
-            row = arrow[y]
-            for x in range(8):
-                bit = 1 << (7-x) & row
-                # display the pixel into selected frame with varying intensity
-                if bit:
-                    display.pixel(x + frame, y, frame**2 + 1)
-    display.sleep(False)
-    # now tell the display to show the frame one at time
-    while True:
-        for frame in range(8):
-            display.frame(frame)
-            time.sleep(.1)
+        display.frame(frame)
+        time.sleep(.1)
diff --git a/examples/is31fl3731_simpletest.py b/examples/is31fl3731_simpletest.py
index cc0a5a4..eae4851 100644
--- a/examples/is31fl3731_simpletest.py
+++ b/examples/is31fl3731_simpletest.py
@@ -2,19 +2,23 @@
 import busio
 import adafruit_is31fl3731
 
+i2c = busio.I2C(board.SCL, board.SDA)
 
-with busio.I2C(board.SCL, board.SDA) as i2c:
-    # initialize display using Feather CharlieWing LED 15 x 7
-    display = adafruit_is31fl3731.CharlieWing(i2c)
-    # uncomment next line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
-    #display = adafruit_is31fl3731.Matrix(i2c)
+# initialize display using Feather CharlieWing LED 15 x 7
+display = adafruit_is31fl3731.CharlieWing(i2c)
 
-    # draw a box on the display
-    # first draw the top and bottom edges
-    for x in range(display.width):
-        display.pixel(x, 0, 50)
-        display.pixel(x, display.height - 1, 50)
-    # now draw the left and right edges
-    for y in range(display.height):
-        display.pixel(0, y, 50)
-        display.pixel(display.width - 1, y, 50)
+# uncomment next line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.Matrix(i2c)
+
+# uncomment next line if you are using Adafruit 16x8 Charlieplexed Bonnet
+#display = adafruit_is31fl3731.CharlieBonnet(i2c)
+
+# draw a box on the display
+# first draw the top and bottom edges
+for x in range(display.width):
+    display.pixel(x, 0, 50)
+    display.pixel(x, display.height - 1, 50)
+# now draw the left and right edges
+for y in range(display.height):
+    display.pixel(0, y, 50)
+    display.pixel(display.width - 1, y, 50)
diff --git a/examples/text.py b/examples/text.py
index cb3ad9f..2ad8741 100644
--- a/examples/text.py
+++ b/examples/text.py
@@ -1,39 +1,46 @@
 import board
 import busio
-import framebuf
+import adafruit_framebuf
 import adafruit_is31fl3731
 
-buf = bytearray(32)
-
-with busio.I2C(board.SCL, board.SDA) as i2c:
-    # initial display using Feather CharlieWing LED 15 x 7
-    display = adafruit_is31fl3731.CharlieWing(i2c)
-    # uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
-    #display = adafruit_is31fl3731.Matrix(i2c)
-
-    fb = framebuf.FrameBuffer(buf, display.width, display.height, framebuf.MONO_VLSB)
-    text_to_show = "Adafruit!!"
-    frame = 0 # start with frame 0
-    while True:
-        for i in range(len(text_to_show) * 9):
-            fb.fill(0)
-            fb.text(text_to_show, -i + display.width, 0)
-
-            # to improve the display flicker we can use two frame
-            # fill the next frame with scrolling text, then
-            # show it.
-            display.frame(frame, show=False)
-            # turn all LEDs off
-            display.fill(0)
-            for x in range(display.width):
-                # using the FrameBuffer text result
-                bite = buf[x]
-                for y in range(display.height):
-                    bit = 1 << y & bite
-                    # if bit > 0 then set the pixel brightness
-                    if bit:
-                        display.pixel(x, y, 50)
-
-            # now that the frame is filled, show it.
-            display.frame(frame, show=True)
-            frame = 0 if frame else 1
+
+i2c = busio.I2C(board.SCL, board.SDA)
+
+# initial display using Feather CharlieWing LED 15 x 7
+#display = adafruit_is31fl3731.CharlieWing(i2c)
+# uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.Matrix(i2c)
+# uncomment line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+display = adafruit_is31fl3731.CharlieBonnet(i2c)
+
+text_to_show = "Adafruit!!"
+
+# Create a framebuffer for our display
+buf = bytearray(32)  # 2 bytes tall x 16 wide = 32 bytes (9 bits is 2 bytes)
+fb = adafruit_framebuf.FrameBuffer(buf, display.width, display.height, adafruit_framebuf.MVLSB)
+
+
+frame = 0 # start with frame 0
+while True:
+    for i in range(len(text_to_show) * 9):
+        fb.fill(0)
+        fb.text(text_to_show, -i + display.width, 0, color=1)
+
+        # to improve the display flicker we can use two frame
+        # fill the next frame with scrolling text, then
+        # show it.
+        display.frame(frame, show=False)
+        # turn all LEDs off
+        display.fill(0)
+        for x in range(display.width):
+            # using the FrameBuffer text result
+            bite = buf[x]
+            for y in range(display.height):
+                bit = 1 << y & bite
+                # if bit > 0 then set the pixel brightness
+                if bit:
+                    display.pixel(x, y, 50)
+
+        # now that the frame is filled, show it.
+        display.frame(frame, show=True)
+        frame = 0 if frame else 1
diff --git a/examples/wave.py b/examples/wave.py
index f3e48dc..21523d8 100644
--- a/examples/wave.py
+++ b/examples/wave.py
@@ -2,25 +2,31 @@
 import busio
 import adafruit_is31fl3731
 
+i2c = busio.I2C(board.SCL, board.SDA)
 
 sweep = [1, 2, 3, 4, 6, 8, 10, 15, 20, 30, 40, 60, 60, 40, 30, 20, 15, 10, 8, 6, 4, 3, 2, 1]
 
 frame = 0
-with busio.I2C(board.SCL, board.SDA) as i2c:
-    # initialize display using Feather CharlieWing LED 15 x 7
-    display = adafruit_is31fl3731.CharlieWing(i2c)
-    # uncomment next line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
-    #display = adafruit_is31fl3731.Matrix(i2c)
 
-    while True:
-        for incr in range(24):
-            # to reduce update flicker, use two frames
-            # make a frame active, don't show it yet
-            display.frame(frame, show=False)
-            # fill the display with the next frame
-            for x in range(display.width):
-                for y in range(display.height):
-                    display.pixel(x, y, sweep[(x+y+incr)%24])
-            # show the next frame
-            display.frame(frame, show=True)
-            frame = 0 if frame else 1
+# initialize display using Feather CharlieWing LED 15 x 7
+display = adafruit_is31fl3731.CharlieWing(i2c)
+# uncomment next line if you are using Adafruit 16x9 Charlieplexed PWM LED Matrix
+#display = adafruit_is31fl3731.Matrix(i2c)
+# uncomment next line if you are using Adafruit 16x8 Charlieplexed Bonnet
+#display = adafruit_is31fl3731.CharlieBonnet(i2c)
+
+while True:
+    for incr in range(24):
+        # to reduce update flicker, use two frames
+        # make a frame active, don't show it yet
+        display.frame(frame, show=False)
+        # fill the display with the next frame
+        for x in range(display.width):
+            for y in range(display.height):
+                display.pixel(x, y, sweep[(x+y+incr)%24])
+        # show the next frame
+        display.frame(frame, show=True)
+        if frame:
+            frame = 0
+        else:
+            frame = 1
diff --git a/requirements.txt b/requirements.txt
index 6b4e64a..2b802ba 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -1 +1,2 @@
-Adafruit-Blinka
\ No newline at end of file
+Adafruit-Blinka
+adafruit-circuitpython-framebuf
\ No newline at end of file