diff --git a/ports/espressif/boards/makergo_esp32c6_supermini/board.c b/ports/espressif/boards/makergo_esp32c6_supermini/board.c
new file mode 100644
index 000000000000..8cb7168e0da8
--- /dev/null
+++ b/ports/espressif/boards/makergo_esp32c6_supermini/board.c
@@ -0,0 +1,22 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2023 bill88t
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "driver/gpio.h"
+#include "common-hal/microcontroller/Pin.h"
+
+bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
+    if (pin_number == 15) {
+        // Turn on the spare led on boot as a power indicator.
+        config_pin_as_output_with_level(pin_number, true);
+        return true;
+    }
+    return false;
+}
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/makergo_esp32c6_supermini/mpconfigboard.h b/ports/espressif/boards/makergo_esp32c6_supermini/mpconfigboard.h
new file mode 100644
index 000000000000..ed8dec14f0ae
--- /dev/null
+++ b/ports/espressif/boards/makergo_esp32c6_supermini/mpconfigboard.h
@@ -0,0 +1,19 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 Bill Sideris, independently providing these changes.
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Board setup
+#define MICROPY_HW_BOARD_NAME       "Maker Go ESP32C6 Supermini"
+#define MICROPY_HW_MCU_NAME         "ESP32-C6"
+
+// Status LED
+#define MICROPY_HW_NEOPIXEL         (&pin_GPIO8)
+#define MICROPY_HW_NEOPIXEL_COUNT   (1)
+
+// Default bus pins
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO17)
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO16)
diff --git a/ports/espressif/boards/makergo_esp32c6_supermini/mpconfigboard.mk b/ports/espressif/boards/makergo_esp32c6_supermini/mpconfigboard.mk
new file mode 100644
index 000000000000..54078559d7be
--- /dev/null
+++ b/ports/espressif/boards/makergo_esp32c6_supermini/mpconfigboard.mk
@@ -0,0 +1,8 @@
+CIRCUITPY_CREATOR_ID = 0x19981000
+CIRCUITPY_CREATION_ID = 0x00C60001
+
+IDF_TARGET = esp32c6
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
diff --git a/ports/espressif/boards/makergo_esp32c6_supermini/pins.c b/ports/espressif/boards/makergo_esp32c6_supermini/pins.c
new file mode 100644
index 000000000000..b396e5bb1afa
--- /dev/null
+++ b/ports/espressif/boards/makergo_esp32c6_supermini/pins.c
@@ -0,0 +1,46 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 Bill Sideris, independently providing these changes.
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // Left to Right top to bottom
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
+
+    // Extras
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/makergo_esp32c6_supermini/sdkconfig b/ports/espressif/boards/makergo_esp32c6_supermini/sdkconfig
new file mode 100644
index 000000000000..e96286621603
--- /dev/null
+++ b/ports/espressif/boards/makergo_esp32c6_supermini/sdkconfig
@@ -0,0 +1,14 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration