diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h new file mode 100644 index 000000000000..5c4f8a6b2acc --- /dev/null +++ b/keyboards/qwertyydox/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2018 Ayden + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCEEB +#define PRODUCT_ID 0x1256 +#define DEVICE_VER 0x0100 +#define MANUFACTURER AYDENandDAD Youtube +#define PRODUCT QWERTYYdox +#define DESCRIPTION Split 45 percent ergonomic keyboard with two Y keys + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 7 + +// wiring of each half +#define MATRIX_ROW_PINS { B6, B2, B3, B1 } +#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define BACKLIGHT_PIN E6 +#define BACKLIGHT_LEVELS 5 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D6 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/qwertyydox/info.json b/keyboards/qwertyydox/info.json new file mode 100644 index 000000000000..0b762388ec59 --- /dev/null +++ b/keyboards/qwertyydox/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "QWERTYYdox", + "manufacturer": "aydenvis", + "identifier": "0x1256", + "url": "", + "maintainer": "qmk", + "processor": "atmega32u4", + "width": 14, + "height": 4, + "layouts": { + "LAYOUT": { + "key_count": 53, + "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.25}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.5}, {"label":"R00", "x":9, "y":0.5}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.25}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.25}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.5}, {"label":"R10", "x":9, "y":1.5}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.25}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.25}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6.5, "y":3}, {"label":"R20", "x":8.5, "y":3}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.25}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.25}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":5.5, "y":4}, {"label":"L35", "x":6.5, "y":4}, {"label":"R30", "x":8.5, "y":4}, {"label":"R31", "x":9.5, "y":4}, {"label":"R32", "x":12, "y":3}, {"label":"R33", "x":13, "y":3.125}, {"label":"R34", "x":14, "y":3.25}, {"label":"R35", "x":15, "y":3.375}] + } + } +} diff --git a/keyboards/qwertyydox/keymaps/default/config.h b/keyboards/qwertyydox/keymaps/default/config.h new file mode 100644 index 000000000000..6b4e3fe96e88 --- /dev/null +++ b/keyboards/qwertyydox/keymaps/default/config.h @@ -0,0 +1,43 @@ +/* +Copyright 2018 Ayden . +*/ + +#pragma once + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +#define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#define MOUSEKEY_DELAY 150 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 10 +#define MOUSEKEY_TIME_TO_MAX 10 +#define MOUSEKEY_WHEEL_MAX_SPEED 8 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 \ No newline at end of file diff --git a/keyboards/qwertyydox/keymaps/default/keymap.c b/keyboards/qwertyydox/keymaps/default/keymap.c new file mode 100644 index 000000000000..5967c5146f17 --- /dev/null +++ b/keyboards/qwertyydox/keymaps/default/keymap.c @@ -0,0 +1,83 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _NUM 1 +#define _NAV 2 +enum custom_keycodes { + qwerty = SAFE_RANGE, + nav, + num, + EQL +}; + +// #define KC_ KC_TRNS +#define __ KC_NO +#define NAV TO(2) +#define NUM TO(1) +#define ALPHA TO(0) +#define NPLUS KC_KP_PLUS +#define NMINUS KC_KP_MINUS +#define NSTAR KC_KP_ASTERISK +#define NSLASH KC_KP_SLASH + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, __, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, NUM, NAV, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL + //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' + ), + + [_NUM] = LAYOUT( + //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, __, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, NAV, ALPHA, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL + //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' + ), + + [_NAV] = LAYOUT( + //,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. + KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, NSLASH, NSTAR, NMINUS, NPLUS, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, __, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, ALPHA, NUM, KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET + //`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + case qwerty: + SEND_STRING("-QWERTY"); + return false; + case nav: + SEND_STRING("-NAV"); // selects all and copies + return false; + case num: + SEND_STRING("-NUM"); // selects all and copies + return false; + case EQL: + SEND_STRING("="); // selects all and copies + return false; + } + } + return true; +}; diff --git a/keyboards/qwertyydox/keymaps/default/rules.mk b/keyboards/qwertyydox/keymaps/default/rules.mk new file mode 100644 index 000000000000..8b137891791f --- /dev/null +++ b/keyboards/qwertyydox/keymaps/default/rules.mk @@ -0,0 +1 @@ + diff --git a/keyboards/qwertyydox/qwertyydox.c b/keyboards/qwertyydox/qwertyydox.c new file mode 100644 index 000000000000..53c3eca6480e --- /dev/null +++ b/keyboards/qwertyydox/qwertyydox.c @@ -0,0 +1 @@ +#include "qwertyydox.h" diff --git a/keyboards/qwertyydox/qwertyydox.h b/keyboards/qwertyydox/qwertyydox.h new file mode 100644 index 000000000000..57bd0dc54a33 --- /dev/null +++ b/keyboards/qwertyydox/qwertyydox.h @@ -0,0 +1,24 @@ +#ifndef QWERTYYDOX_H +#define QWERTYYDOX_H + +#ifdef KEYBOARD_qwertyydox_rev1 + #include "rev1.h" +#endif + +#include "quantum.h" + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ + L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ + L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + +#endif \ No newline at end of file diff --git a/keyboards/qwertyydox/readme.md b/keyboards/qwertyydox/readme.md new file mode 100644 index 000000000000..1fa984e03196 --- /dev/null +++ b/keyboards/qwertyydox/readme.md @@ -0,0 +1,27 @@ +QWERTYYdox +==== + +![QWERTYYdox](https://imgur.com/gallery/Pwwb0Q0) + + +A split ergo 4x7 keyboard with 3 thumb keys and 2 Y keys. + +**Status** The QWERTYYdox is a personal project, however it is completely functional. + +Keyboard Maintainer: /u/aydenvis + +Hardware Supported: Pro Micro (ATmega32U4) + +Hardware Availability: The whole thing is handwired with plates cut by [/u/JOlimon](stratakb.com) + + +Make example for this keyboard (after setting up your build environment): + + make qwertyydox/rev1:default + +Example of flashing this keyboard: + + make qwertyydox/rev1:default:avrdude + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + diff --git a/keyboards/qwertyydox/rev1/config.h b/keyboards/qwertyydox/rev1/config.h new file mode 100644 index 000000000000..c5c4daa3d385 --- /dev/null +++ b/keyboards/qwertyydox/rev1/config.h @@ -0,0 +1,91 @@ +/* +Copyright 2018 Ayden + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include QMK_KEYBOARD_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCEEB +#define PRODUCT_ID 0x1256 +#define DEVICE_VER 0x0100 +#define MANUFACTURER AYDENandDAD +#define PRODUCT QWERTYdox Keyboard +#define DESCRIPTION Split 40 percent keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 7 + +// wiring of each half +#define MATRIX_ROW_PINS { B6, B2, B3, B1 } +#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define BACKLIGHT_PIN E6 +#define BACKLIGHT_LEVELS 5 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D6 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/qwertyydox/rev1/rev1.c b/keyboards/qwertyydox/rev1/rev1.c new file mode 100644 index 000000000000..609c479eb378 --- /dev/null +++ b/keyboards/qwertyydox/rev1/rev1.c @@ -0,0 +1,22 @@ +#include "rev1.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; diff --git a/keyboards/qwertyydox/rev1/rev1.h b/keyboards/qwertyydox/rev1/rev1.h new file mode 100644 index 000000000000..d620e62108d3 --- /dev/null +++ b/keyboards/qwertyydox/rev1/rev1.h @@ -0,0 +1,37 @@ +#ifndef REV1_H +#define REV1_H + +#include "qwertyydox.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \ + L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05, L06 }, \ + { L10, L11, L12, L13, L14, L15, KC_NO }, \ + { L20, L21, L22, L23, L24, L25, KC_NO }, \ + { L30, L31, L32, L33, L34, L35, L36 }, \ + { R06, R05, R04, R03, R02, R01, R00 }, \ + { R16, R15, R14, R13, R12, R11, R10 }, \ + { R26, R25, R24, R23, R22, R21, R20, }, \ + { R36, R35, R34, R33, R32, R31, R30 } \ + } + +#endif diff --git a/keyboards/qwertyydox/rev1/rules.mk b/keyboards/qwertyydox/rev1/rules.mk new file mode 100644 index 000000000000..7b30c0beff2a --- /dev/null +++ b/keyboards/qwertyydox/rev1/rules.mk @@ -0,0 +1 @@ +BACKLIGHT_ENABLE = no diff --git a/keyboards/qwertyydox/rules.mk b/keyboards/qwertyydox/rules.mk new file mode 100644 index 000000000000..d8a287bbc825 --- /dev/null +++ b/keyboards/qwertyydox/rules.mk @@ -0,0 +1,69 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 = yes +USE_I2C = yes # I2C is used between the sides +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +SPLIT_KEYBOARD = yes + +DEFAULT_FOLDER = qwertyydox/rev1