A robust shell script (bash / sh) that automates the installation of an Arch Linux ARM base system, for use with ARM Chromebooks, based on the install instructions at Arch Linux ARM.
Confirmed devices:
External only (sdcard, usb stick /drive) click here for patch progress
Unconfirmed Devices:
if you try the script for one of these devices, and it works, please let me know which chromebook it worked for, so i can add it to confimed devices. thank you.
-
and possibly other Chromebooks with the Exynos ARM Processor
-
and possibly other Chromebooks with the Rockchip RK3288 ARM Processor
Possible Future Upcomming Devices:
To install Arch Linux ARM on a SDcard / USB drive:
* Make sure that developer mode is enabled. (enabling developer mode will wipe everything on the chromebook's internal flash memory. back up anything you want to keep.)
Hold down the ESC and Refresh keys and poke the Power button.
At the Recovery screen press Ctrl-D
(there's no prompt - you have to know to do it).
Confirm switching to developer mode by pressing enter,
and the laptop will reboot and reset the system.
This takes about 15-20 minutes.
Note: After enabling developer mode,
you will need to press Ctrl-D each time you boot,
or wait 30 seconds to continue booting.
<br/>
the following steps work in chromeOS
- get CROSH shell going (press ctrl + alt + t, then enter
shell
) cd ~/Downloads
(moves to your current user's downloads directory)curl -LO https://raw.githubusercontent.com/altreact/archbk/master/make-arch_drv.sh
sudo sh make-arch_drv.sh
orsudo sh make-arch_drv.sh (dev)
(where dev = sda, sdb, mmcblk1, ect)- follow the instructions & let the script do it's thing.
- reboot, then press ctrl + u to boot Arch Linux ARM (username: root , password: root)
To install Arch Linux ARM to internal flash memory:
- create a chromeos recovery media device
- follow instructions above to install Arch Linux ARM on a SDcard / USB drive.
sh helper.sh
(allows you to easily: change root password, create new sudo user, connect to wifi, install Arch on internal flash memory)- follow the instructions & let the script do it's thing.
- press ctlr + d, then login with your new user credentials.
After Installation:
- update your mirrorlist
pacman -Syu
(updates system and all software)- other post install recommendations
- if you don't fancy the command line interface and want a decent Graphical User Interface (GUI, DE), install MATE Desktop Environment
Upcomming features:
- ability to install MATE Desktop Environment, based on the instructions found at calvin.me