- Step 1: Install dependencies
- Step 2: Create a user account
- Step 3: Checkout the code
- Step 4: Setup Virtual Environment
- Step 5: Install configuration file
- Step 6: Generate a DSA key (OPTIONAL)
- Step 7: Starting Cowrie
- Step 8: Port redirection (OPTIONAL)
- Running within supervisord (OPTIONAL)
- Configure Additional Output Plugins (OPTIONAL)
- Troubleshooting
First we install system-wide support for Python virtual environments and other dependencies. Actual Python packages are installed later.
On Debian based systems (last verified on Debian 9, 2017-07-25): For a Python3 based environment:
$ sudo apt-get install git python-virtualenv libssl-dev libffi-dev build-essential libpython3-dev python3-minimal authbind
Or for Python2:
$ sudo apt-get install git python-virtualenv libssl-dev libffi-dev build-essential libpython-dev python2.7-minimal authbind
It's strongly recommended to run with a dedicated non-root user id:
$ sudo adduser --disabled-password cowrie
Adding user `cowrie' ...
Adding new group `cowrie' (1002) ...
Adding new user `cowrie' (1002) with group `cowrie' ...
Changing the user information for cowrie
Enter the new value, or press ENTER for the default
Full Name []:
Room Number []:
Work Phone []:
Home Phone []:
Other []:
Is the information correct? [Y/n]
$ sudo su - cowrie
$ git clone https://github.com/amv42/cowrie-sshd
Cloning into 'cowrie-sshd'...
remote: Counting objects: 9905, done.
remote: Compressing objects: 100% (2961/2961), done.
remote: Total 9905 (delta 6798), reused 9897 (delta 6790), pack-reused 0
Receiving objects: 100% (9905/9905), 7.63 MiB | 9.32 MiB/s, done.
Resolving deltas: 100% (6798/6798), done.
=======
$ cd cowrie-sshd
Next you need to create your virtual environment:
$ pwd
/home/cowrie/cowrie-sshd
$ virtualenv cowrie-env
Running virtualenv with interpreter /usr/bin/python2
New python executable in /home/cowrie/cowrie-sshd/cowrie-env/bin/python2
Also creating executable in /home/cowrie/cowrie-sshd/cowrie-env/bin/python
Installing setuptools, pkg_resources, pip, wheel...done.
Activate the virtual environment and install packages
$ source cowrie-env/bin/activate
(cowrie-env) $ pip install --upgrade pip
(cowrie-env) $ pip install --upgrade -r requirements.txt
The configuration for Cowrie is stored in cowrie.cfg.dist and cowrie.cfg. Both files are read on startup, where entries from cowrie.cfg take precedence. The .dist file can be overwritten by upgrades, cowrie.cfg will not be touched. To run with a standard configuration, there is no need to change anything. To enable telnet, for example, create cowrie.cfg and input only the following:
[telnet]
enabled = true
This step should not be necessary, however some versions of Twisted are not compatible. To avoid problems in advance, run:
$ cd data
$ ssh-keygen -t dsa -b 1024 -f ssh_host_dsa_key
$ cd ..
Start Cowrie with the cowrie command. You can add the cowrie/bin directory to your path if desired. An existing virtual environment is preserved if activated, otherwise Cowrie will attempt to load the environment called "cowrie-env"
$ bin/cowrie start
Activating virtualenv "cowrie-env"
Starting cowrie with extra arguments [] ...
All port redirection commands are system-wide and need to be executed as root. A firewall redirect can make your existing SSH server unreachable, remember to move the existing server to a different port number first.
Cowrie-sshd runs by default on localhost (127.0.0.1) and port 65522. This can be modified in the configuration file. The following firewall rule will forward incoming traffic on port 22 to port 65222 (default port for sshd-honeypot).
$ sudo iptables -t nat -A PREROUTING -p tcp --dport 22 -j REDIRECT --to-port 65222
Note that you should test this rule only from another host; it doesn't apply to loopback connections.
On MacOS run:
$ echo "rdr pass inet proto tcp from any to any port 22 -> 127.0.0.1 port 2222" | sudo pfctl -ef -
Alternatively you can run authbind to listen as non-root on port 22 directly:
$ sudo apt-get install authbind
$ sudo touch /etc/authbind/byport/22
$ sudo chown cowrie:cowrie /etc/authbind/byport/22
$ sudo chmod 770 /etc/authbind/byport/22
- Edit bin/cowrie and modify the AUTHBIND_ENABLED setting
- Change listen_port to 22 in cowrie.cfg
Or for telnet:
$ sudo iptables -t nat -A PREROUTING -p tcp --dport 23 -j REDIRECT --to-port 2223
with authbind:
$ apt-get install authbind
$ sudo touch /etc/authbind/byport/23
$ sudo chown cowrie:cowrie /etc/authbind/byport/23
$ sudo chmod 770 /etc/authbind/byport/23
On Debian, put the below in /etc/supervisor/conf.d/cowrie.conf
[program:cowrie]
command=/home/cowrie/cowrie/bin/cowrie start
directory=/home/cowrie/cowrie/
user=cowrie
autorestart=true
redirect_stderr=true
Update the bin/cowrie script, change:
DAEMONIZE=""
to:
DAEMONIZE="-n"
Cowrie automatically outputs event data to text and JSON log files
in var/log/cowrie
. Additional output plugins can be configured to
record the data other ways. Supported output plugins include:
- Cuckoo
- ELK (Elastic) Stack
- Graylog
- Kippo-Graph
- Splunk
- SQL (MySQL, SQLite3, RethinkDB)
See ~/cowrie/docs/[Output Plugin]/README.md for details.
- If you see
twistd: Unknown command: cowrie
there are two possibilities. If there's a Python stack trace, it probably means there's a missing or broken dependency. If there's no stack trace, double check that your PYTHONPATH is set to the source code directory. - Default file permissions
To make Cowrie logfiles public readable, change the --umask 0077
option in start.sh into --umask 0022
Updating is an easy process. First stop your honeypot. Then fetch updates from GitHub, and upgrade your Python dependencies.
bin/cowrie stop
git pull
pip install --upgrade -r requirements.txt
If you use output plugins like SQL, Splunk, or ELK, remember to also upgrade your dependencies for these too.
pip install --upgrade -r requirements-output.txt
And finally, start Cowrie back up after finishing all updates.
bin/cowrie start
The pre-login banner can be set by creating the file honeyfs/etc/issue.net
.
The post-login banner can be customized by editing honeyfs/etc/motd
.