USER_BACKLOG - only the first command is executed

[thermseekr]

Hello all,

Edit: I'm compiling 14.2.0 env:tasmota32 in Platformio.

I'm trying to run a few comands in USER_BACKLOG after setting a custom template and selecting module 0, but only the first command is being executed. Here is the relevant part of user_config_override.h:

#define USER_TEMPLATE   "{\"NAME\":\"ESP-24V-16CH-V2\",\"GPIO\":[0,3200,0,3232,0,0,0,0,5536,10240,10241,0,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,608,640,0,0,0,0,0,0],\"FLAG\":0,\"BASE\":1}"

#undef MODULE
#define MODULE USER_MODULE

#define USER_BACKLOG "ethipaddress 10.112.66.22; ethsubnetmask 255.255.255.0; ethgateway 10.112.66.254; wifi 0"

If I change the order of the commands, say make "wifi 0" the first one, again only this one is executed. And if I try the same commands in backlog on a terminal, it executes them all correctly:

00:11:42.279 CMD: backlog ethipaddress 10.112.66.22; ethsubnetmask 255.255.255.0; ethgateway 10.112.66.254; wifi 0
00:11:42.324 RSL: RESULT = {"EthIPAddress":"10.112.66.22"}
00:11:42.574 RSL: RESULT = {"EthSubnetmask":"255.255.255.0"}
00:11:42.824 RSL: RESULT = {"EthGateway":"10.112.66.254"}
00:11:43.072 RSL: RESULT = {"Wifi":"OFF","Mode":""}

What am I doing wrong, can someone see it?

Thanks.
Tales Maschio

[thermseekr]

Hi, any ideas?

[Th0maz]

Just guessing...
Try without the spaces between commands

[thermseekr]

Tried that, thanks anyway 👍🏻

[tsmoneta]

The documentation says it's only executed on the first boot after a reset (no variables defined in flash). If you've already changed a configuration setting, that's not the case. Perhaps a rule with 'on system#boot' would be more appropriate to your use case.

[thermseekr]

Ah! I missed that it's only executed on first run. Maybe I got confused by the fact that the first instruction in the backlog is always executed. Or at least it looks like. Will need to check again.

Thanks for the help.

Tales