Skip to content

Latest commit

 

History

History
116 lines (94 loc) · 3.19 KB

README.md

File metadata and controls

116 lines (94 loc) · 3.19 KB
Raw

PortAutoDescription

Port auto-description tool automatically updates the port description of an interface based on the lldp neighbor information of the attached device.

INSTALLATION

In order to install this extension:

  • copy 'portAuto' to /mnt/flash
  • enable the Command API interface:

By default, the script is set to use unix-sockets. Since the script runs on the local switch, by using unix-sockets you do not need to keep credentials in the script.

conf
management api http-commands
    protocol unix-socket
    no shutdown

(This will enable eAPI for HTTPS if you do not want to use unix-sockets)

management api http-commands
    no shutdown

change SWITCH_IP, USERNAME and PASSWORD at the top of the script to the ones appropriate for your installation. If running locallty, use '127.0.0.1' for the IP. If using unix-sockets you do not need to worry about USERNAME and PASSWORD.

portAuto can then be started using any of the following methods:

1 - Execute directly from bash (from the switch, or a remote switch/server running Python):

(bash)# /mnt/flash/portAuto

2 - Configure an alias on the switch:

(config)# alias portAuto bash /mnt/flash/portAuto

3 - Schedule a job on the switch: e.g.: In order to run portAuto every 12 hours, use:


(config)# schedule portAuto interval 720 max-log-files 0
         command bash sudo /mnt/flash/portAuto

4 - Run at switch boot time by adding the following startup config:

(config)# event-handler portAutoDescription
(config)# trigger on-boot
(config)# action bash /mnt/flash/portAuto
(config)# asynchronous
(config)# exit

Note that in order for this to work, you will also have to enable the Command API interface in the startup-config (see above).

CUSTOMIZATION

Version 3 of this script provides more information by leveraging the show lldp neighbors detail command. Therefore, you can adjust the description string by using any of the keys in the following object:

{
  'age': 3,
  'neighborDevice': u'veos-dc1-pod1-spine2',
  'neighborEnabledCapabilities': [u'Bridge'],
  'neighborMac': u'0011.2233.4456',
  'neighborMaxFrameSize': u'9236',
  'neighborMgmtAddr': u'192.168.0.10',
  'neighborMgmtAddrType': u'IPv4',
  'neighborMgmtOid': '',
  'neighborPort': u'Ethernet3',
  'neighborPortDescription': u'My wonderful Et3',
  'neighborSystemCapabilities': [u'Bridge', u'Router'],
  'neighborSystemDescription': u'Arista Networks EOS version 4.14.2F running on an Arista Networks vEOS',
  'neighborVlanId': u'1',
  'port': u'Ethernet3',
  'ttl': 120
}

Armed with this object, you can now make the interface description anything you like. EG:

intfDesc = '*** Link to %s[%s] | VLAN%s | MGMT %s' % (i['neighborDevice'],
                                                      i['neighborPort'],
                                                      i['neighborVlanId'],
                                                      i['neighborMgmtAddr'])

COMPATIBILITY

Version 2.0 has been developed and tested against EOS-4.12.0 and is using the Command API interface. Hence, it should maintain backward compatibility with future EOS releases.

LIMITATIONS

None known.

LICENSE

BSD-3, See LICENSE file