-
Notifications
You must be signed in to change notification settings - Fork 2
/
eeprom.c
151 lines (131 loc) · 5.47 KB
/
eeprom.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
// This file has been prepared for Doxygen automatic documentation generation.
/*! \file ********************************************************************
*
* Atmel Corporation
*
* \li File: eeprom.c
* \li Compiler: IAR EWAAVR 3.10c
* \li Support mail: avr@atmel.com
*
* \li Supported devices: All devices with split EEPROM erase/write
* capabilities can be used.
* The example is written for ATmega48.
*
* \li AppNote: AVR103 - Using the EEPROM Programming Modes.
*
* \li Description: Example on how to use the split EEPROM erase/write
* capabilities in e.g. ATmega48. All EEPROM
* programming modes are tested, i.e. Erase+Write,
* Erase-only and Write-only.
*
* $Revision: 1.6 $
* $Date: Friday, February 11, 2005 07:16:44 UTC $
****************************************************************************/
#include <avr/io.h>
#include <avr/interrupt.h>
/* These EEPROM bits have different names on different devices. */
#ifndef EEPE
#define EEPE EEWE //!< EEPROM program/write enable.
#define EEMPE EEMWE //!< EEPROM master program/write enable.
#endif
/* These two are unfortunately not defined in the device include files. */
#define EEPM1 5 //!< EEPROM Programming Mode Bit 1.
#define EEPM0 4 //!< EEPROM Programming Mode Bit 0.
/* Define to reduce code size. */
#define EEPROM_IGNORE_SELFPROG //!< Remove SPM flag polling.
/*! \brief Read byte from EEPROM.
*
* This function reads one byte from a given EEPROM address.
*
* \note The CPU is halted for 4 clock cycles during EEPROM read.
*
* \param addr EEPROM address to read from.
* \return The byte read from the EEPROM address.
*/
unsigned char eeprom_get_char( unsigned int addr )
{
do {} while( EECR & (1<<EEPE) ); // Wait for completion of previous write.
EEAR = addr; // Set EEPROM address register.
EECR = (1<<EERE); // Start EEPROM read operation.
return EEDR; // Return the byte read from EEPROM.
}
/*! \brief Write byte to EEPROM.
*
* This function writes one byte to a given EEPROM address.
* The differences between the existing byte and the new value is used
* to select the most efficient EEPROM programming mode.
*
* \note The CPU is halted for 2 clock cycles during EEPROM programming.
*
* \note When this function returns, the new EEPROM value is not available
* until the EEPROM programming time has passed. The EEPE bit in EECR
* should be polled to check whether the programming is finished.
*
* \note The EEPROM_GetChar() function checks the EEPE bit automatically.
*
* \param addr EEPROM address to write to.
* \param new_value New EEPROM value.
*/
void eeprom_put_char( unsigned int addr, unsigned char new_value )
{
char old_value; // Old EEPROM value.
char diff_mask; // Difference mask, i.e. old value XOR new value.
cli(); // Ensure atomic operation for the write operation.
do {} while( EECR & (1<<EEPE) ); // Wait for completion of previous write.
#ifndef EEPROM_IGNORE_SELFPROG
do {} while( SPMCSR & (1<<SELFPRGEN) ); // Wait for completion of SPM.
#endif
EEAR = addr; // Set EEPROM address register.
EECR = (1<<EERE); // Start EEPROM read operation.
old_value = EEDR; // Get old EEPROM value.
diff_mask = old_value ^ new_value; // Get bit differences.
// Check if any bits are changed to '1' in the new value.
if( diff_mask & new_value ) {
// Now we know that _some_ bits need to be erased to '1'.
// Check if any bits in the new value are '0'.
if( new_value != 0xff ) {
// Now we know that some bits need to be programmed to '0' also.
EEDR = new_value; // Set EEPROM data register.
EECR = (1<<EEMPE) | // Set Master Write Enable bit...
(0<<EEPM1) | (0<<EEPM0); // ...and Erase+Write mode.
EECR |= (1<<EEPE); // Start Erase+Write operation.
} else {
// Now we know that all bits should be erased.
EECR = (1<<EEMPE) | // Set Master Write Enable bit...
(1<<EEPM0); // ...and Erase-only mode.
EECR |= (1<<EEPE); // Start Erase-only operation.
}
} else {
// Now we know that _no_ bits need to be erased to '1'.
// Check if any bits are changed from '1' in the old value.
if( diff_mask ) {
// Now we know that _some_ bits need to the programmed to '0'.
EEDR = new_value; // Set EEPROM data register.
EECR = (1<<EEMPE) | // Set Master Write Enable bit...
(1<<EEPM1); // ...and Write-only mode.
EECR |= (1<<EEPE); // Start Write-only operation.
}
}
sei(); // Restore interrupt flag state.
}
// Extensions added as part of Grbl
void memcpy_to_eeprom_with_checksum(unsigned int destination, char *source, unsigned int size) {
unsigned char checksum = 0;
for(; size > 0; size--) {
checksum = (checksum << 1) || (checksum >> 7);
checksum += *source;
eeprom_put_char(destination++, *(source++));
}
eeprom_put_char(destination, checksum);
}
int memcpy_from_eeprom_with_checksum(char *destination, unsigned int source, unsigned int size) {
unsigned char data, checksum = 0;
for(; size > 0; size--) {
data = eeprom_get_char(source++);
checksum = (checksum << 1) || (checksum >> 7);
checksum += data;
*(destination++) = data;
}
return(checksum == eeprom_get_char(source));
}
// end of file