Skip to content

Latest commit

 

History

History
84 lines (77 loc) · 4.19 KB

rfid_reader.md

File metadata and controls

84 lines (77 loc) · 4.19 KB
Raw

125KHz RFID/ID EM USB IC Card Reader Writer Copier Duplicator

Analysis of a cheap RFID reader I got from Ebay.

Initial analysis

  • lsusb identifies it as 1a86:dd01 QinHeng Electronics.

  • Searched online for cheap RFID readers, found: https://gist.github.com/pgaultier/b870578515a18becc39ce4501a751574

    • The gist said that the reader had a "CH341 USB / Serial Chip". I don't know what that is, have very less experience in hardware stuff.
    • The gist also had some messages for hello, read and write.
    • Didn't try the driver mentioned in the gist though.
    • I also found https://github.com/adrianmihalko/ch340g-ch34g-ch34x-mac-os-x-driver which said that for newer Mac OS you don't need the OEM drivers.

  • Opened the cover and found that the one I had with me had "CH552T" chip.

  • Searching for the chip, I found https://github.com/MarsTechHAN/ch552tool/blob/master/ch55xtool.py, to flash firmware on it. I used to code for references.

    • Tried the device identification code. It didn't provide the required response. Maybe the device is in some other mode.
    • Note: I ran pyusb on Linux VMware with USB forwarded because Mac OS didn't allow easy access to the HID interface. Maybe when the protocol is figured out, I can try hidapi (it has python bidnings) to try and connect from MacOS.

  • Found "USB Serial for Android" app. It had a connection profile for ch340, which was able to establish connection but erred out on some handshake profile.

  • Used chrome translate to reach http://www.wch.cn/downloads/CH552EVT_ZIP.html which lists some header files. The description also said about CH554EVT.ZIP which contains examples.

    • CH554EVT.ZIP had many C code, but a lot of them had comments in Chinese language. Used Google translate to read them.

  • Imaged the disk provided on another laptop and transferred the file here. Found the DLL file with protocol.

    • Tried to imitate the protocol with pyusb, didn't work.
    • Ran it with Wireshark USB capture to iron out the details that I counldn't infer from the DLL, like all packets start with 0x01, and are 64 byte sized. The unused data is filled with 0xCC.
    • running in Windows VM, I couldn't get any HID Prox cards to read, so couldn't test the read/write opcodes.
    • Was able to write to one of the cards provided with the reader and then read back using pysub or hidapi to connect to the device.

Protocol

  • All packets are 64 byte sized, input & output. Maybe larger data will require more packets, will cross the bridge when we need that.
  • the payload are structured like:
   0xAA 0x55 0xWW 0xWW 0xOP 0xOP 0xPL 0xPL [payload in hex] 0xCX

where:

  • 0xAA 0x55 is the header.

  • 0xWW 0xWW represents some data that I always have found to be 0 in request and 0x1112 in response.

  • 0xOP 0xOP represents the opcode in big endian.

  • 0xPL 0xPL represents the payload length in big endian.

  • [payload] represents the payload.

  • 0xCX represents the XOR of all the bytes excluding the header bytes.

  • Any occurrence of by 0xAA except in header is escaped as 0xAA 0x00.

  • Each packet is 64 bytes and starts with 0x01 followed by 63 bytes of payload data. Any unused bytes in the packet is filled with 0xCC.

  • The opcodes are as follows:

OPCODE_SET_AUTOREAD = 0x801 # one byte payload, always found to be 0
OPCODE_SET_LED = 0x802 # one byte payload, 2 = green, anything else is red
OPCODE_GET_FREQUENCY = 0x805 # no payload
OPCODE_GET_MODEL = 0x806 # no payload
OPCODE_GET_NUMBER = 0x808 # no payload
OPCODE_READ_ID_CARD = 0x809 # no payload
OPCODE_WRITE_EL4100 = 0x810 # 5 byte payload, data to be written
OPCODE_WRITE_T4100 = 0x811 # 6 byte payload, first is 0 or 1, rest is data to be
written. Maybe the first byte is to lock the card or not
OPCODE_WRITE_E4100 = 0x812 # 6 byte payload, first is 0 or 1, rest is data to be written

Working with cards:

  • The device I had was not able to read HID cards.
  • The cards that came with the device were able to be written using OPCODE_WRITE_T4100.