- firmware for Anycubic Kossel Linear Plus 3d printer
- based on Marlin 2.0.x release version
- BigtreeTech SKR 1.3 board (https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3) with TMC2208 stepper drivers in UART mode
- BigtreeTech TFT24 dualmode screen (https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1)
- [Soon] inductive sensor for delta calibration and bed leveling
02/25/20 Recalibrated PID values
Additional documentation can be found at the Marlin Home Page. Please let us know if Marlin misbehaves in any way. Volunteers are standing by!
Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.
Download earlier versions of Marlin on the Releases page.
To build Marlin 2.0 you'll need Arduino IDE 1.8.8 or newer or PlatformIO. Detailed build and install instructions are posted at:
Platform | MCU | Example Boards |
---|---|---|
Arduino AVR | ATmega | RAMPS, Melzi, RAMBo |
Teensy++ 2.0 | AT90USB1286 | Printrboard |
Arduino Due | SAM3X8E | RAMPS-FD, RADDS, RAMPS4DUE |
LPC1768 | ARM® Cortex-M3 | MKS SBASE, Re-ARM, Selena Compact |
LPC1769 | ARM® Cortex-M3 | Smoothieboard, Azteeg X5 mini, TH3D EZBoard |
STM32F103 | ARM® Cortex-M3 | Malyan M200, GTM32 Pro, MKS Robin, BTT SKR Mini |
STM32F401 | ARM® Cortex-M4 | ARMED, Rumba32, SKR Pro, Lerdge, FYSETC S6 |