diff --git a/.versionbot/CHANGELOG.yml b/.versionbot/CHANGELOG.yml index c4785a379..55046f01c 100644 --- a/.versionbot/CHANGELOG.yml +++ b/.versionbot/CHANGELOG.yml @@ -1,3 +1,167 @@ +- commits: + - subject: add dwc2 support to the raspberrypicm4-ioboard-sb kernel + hash: e6d55dd064d6ed0e496fdd3506df1f7d3fd75aad + body: | + This adds support for the DesignWare Core USB 2.0 controller, required + for the USB boot flow. + footer: + Changelog-entry: add dwc2 support to the raspberrypicm4-ioboard-sb kernel + changelog-entry: add dwc2 support to the raspberrypicm4-ioboard-sb kernel + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: use dwc2 driver for USB host mode in CM4-SB. + hash: fdb332ba7f2d5faf79f2a5cc831cffdadae83400 + body: | + The `otg_mode=1` setting makes the firmware mux the USB port + to the XHCI host-only controller. However, even though this correctly + enabled host mode in the USB port, the kernel drivers oops when a cable + is plugged into the OTG port in the ioboard, probably because the XCHI + controller does not support OTG or device mode. + + This commit reverts to using the dwc2 kernel overlay which has less + performance but does not crash. + footer: + Changelog-entry: use dwc2 driver for USB host mode in CM4-SB. + changelog-entry: use dwc2 driver for USB host mode in CM4-SB. + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: update rpi-eeprom firmware to 2024-05-17 + hash: 3336d35ddfc690b0ae78772155e0b6bc82bc19ee + body: "" + footer: + Changelog-entry: update rpi-eeprom firmware to 2024-05-17 + changelog-entry: update rpi-eeprom firmware to 2024-05-17 + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: deploy CM4/RPI4 locking binaries + hash: 3da91bb444d4da5a431027a6e7c8ee336363d669 + body: "" + footer: + Changelog-entry: deploy CM4/RPI4 locking binaries + changelog-entry: deploy CM4/RPI4 locking binaries + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: do not sign msd binaries by default as they are not needed + hash: 3cc312fb0776cbbdbd1a3d6125cb0d9a14c0b281 + body: | + With the USB provisioning being preferred, the msd binaries are no + longer required. + + This commit adds a recipe configuration to make the signing conditional. + footer: + Changelog-entry: do not sign msd binaries by default as they are not needed + changelog-entry: do not sign msd binaries by default as they are not needed + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: enable USB 2.0 for raspberrypicm4-ioboard-sb + hash: 6838519e97b7526e580b6a4e4491cbdec3ac0f7f + body: > + As CM4 and CM4IO don’t include the external USB 3 controller, + + RaspberryPi OS sets `otg_mode=1` for better performance. + + + See + https://www.raspberrypi.com/documentation/computers/config_txt.html#otg_mode-raspberry-pi-4-only + + + However, while testing, the kernel driver oops when the otg cable is + + connected at boot (works well if it is connected after boot though). + + + As this is only needed in the USB provisioning mode, restrict the change + + to the raspberrypicm4-ioboard-sb for the time being. + footer: + Changelog-entry: enable USB 2.0 for raspberrypicm4-ioboard-sb + changelog-entry: enable USB 2.0 for raspberrypicm4-ioboard-sb + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: configure to power off on halt for raspberrypicm4-ioboard-sb + hash: 5641da608e1694f2169c87869f96e4dcc27921ab + body: > + This is useful for the use case of a flasher image ran from external + + media, like in the traditional flasher workflow that expects the device + + to shutdown after programming. + + + From + https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#POWER_OFF_ON_HALT + footer: + Changelog-entry: configure to power off on halt for raspberrypicm4-ioboard-sb + changelog-entry: configure to power off on halt for raspberrypicm4-ioboard-sb + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + - subject: Modify boot order to prioritize USB boot + hash: dad87cfcd68052e35adb5efcf916e6d3726540ed + body: > + With this change the device will first attempt to boot from USB and then + + boot from the NVME/internal eMMC/SD card. This allows to use USB flasher + + images as provisioning tools in preference of usbboot. + + + 5: USB 2.0 boot from USB type A socket (CM4) or Type C socket (RPI4) + + 6: NVME + + 1: eMMC / SD Card + + 2: Network boot + + + We place NVME before eMMC/SDcard as there are reports that NVME is not + + working if initialized after. + + + Also, there is no USB mass storage boot to limit this option to using + + physical jumper configuration. + + + See + https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#BOOT_ORDER + + + Note that trying USB boot first adds a considerable delay to the boot + + process as the CM4 has a timeout of 2s (5s if extended via + + `program_usb_boot_timeout=1` per USB port enumeration. + + + As such, this change is only done to the `raspberrypicm4-ioboard-sb` + + that requires USB boot for the secure boot provisioning flow. + footer: + Changelog-entry: Modify boot order to prioritize USB boot + changelog-entry: Modify boot order to prioritize USB boot + Signed-off-by: Alex Gonzalez + signed-off-by: Alex Gonzalez + author: Alex Gonzalez + nested: [] + version: 5.4.0+rev1 + title: "" + date: 2024-07-21T17:42:17.340Z - commits: - subject: Update layers/meta-balena to 5b9716f19794b0e0da9c474e4e0ffadbde337c30 hash: afbc82977373e0ece9bf173123bcd74864c15287 diff --git a/CHANGELOG.md b/CHANGELOG.md index 354f5809e..a39e46334 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -1,6 +1,18 @@ Change log ----------- +# v5.4.0+rev1 +## (2024-07-21) + +* add dwc2 support to the raspberrypicm4-ioboard-sb kernel [Alex Gonzalez] +* use dwc2 driver for USB host mode in CM4-SB. [Alex Gonzalez] +* update rpi-eeprom firmware to 2024-05-17 [Alex Gonzalez] +* deploy CM4/RPI4 locking binaries [Alex Gonzalez] +* do not sign msd binaries by default as they are not needed [Alex Gonzalez] +* enable USB 2.0 for raspberrypicm4-ioboard-sb [Alex Gonzalez] +* configure to power off on halt for raspberrypicm4-ioboard-sb [Alex Gonzalez] +* Modify boot order to prioritize USB boot [Alex Gonzalez] + # v5.4.0 ## (2024-07-15) diff --git a/VERSION b/VERSION index 1e20ec35c..e1305b5e1 100644 --- a/VERSION +++ b/VERSION @@ -1 +1 @@ -5.4.0 \ No newline at end of file +5.4.0+rev1 \ No newline at end of file