Apply "Prefer RGB" reverts after a minute or so

[Dumonster]

Pretty straight forward: I set an automation to enable "prefer RGB" at 23:00.

It did... And about one minute after it reverted.

I'm using the latest version of everything.

[jlverhagen]

I also noticed color and brightness adaption were having similar behavior after doing some updates to Home Assistant and some integrations. Adaptive Lighting would adapt the color and brightness and then the lights would revert to previous light settings after about a minute. About a minute later, Adaptive Lighting would adapt the color and brightness again. And again, about a minute later, the lights would revert to their previous light settings.

I have tracked down a possible cause of my issue as being related to the Magic Areas v.3.1.1 integration. After reverting to Magic Areas v3.1.0, the lights color and brightness adapts normally. I suspect this might need to be reported on the Magic Areas integration repo.

[Dumonster]

I'm not using Magic Areas so that's probably not related.

[th3w1zard1]

Pretty sure this is an old bug, I remember it being reported a year or so ago. I'll check old issues when I have more time next week.