-
Notifications
You must be signed in to change notification settings - Fork 45
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Active/Passive Bond for Fail safe does not work #17
Comments
Because the script to configure Open vSwitches is executed before loading the driver, Could you try these steps to create
If this method works for you, you can run these commands on startup by configuring the Task scheduler. |
does not work unfortunatly. Stil no ovs_eth2 is generated. I've tried restarting the whole device, but does not work either.
|
Open vSwitch support is added in the latest release. Could you try it? |
I close this issue due to no reply. Please feel free to re-open the issue. |
Hello, I also want to create an active/passive bond. On DSM 7.2, the bond is created, but it is using the Gbit connection from the internal adapter. When I disconnect the cable from internal adapter, the connection doesn't work anymore. |
Description of the problem
I tried to Create an Active/Passive Bond with my QNAP Adapter and one of the internal Network interface for Fail Safe purpose. It says "Applying Network Settings" and reloads DSM Site but the Bond does not get created. Is this even possible with mixed speed Interfaces?
Description of your products
Description of your environment
Output of
dmesg
commandOutput of
lsusb
commandOutput of
ifconfig -a
commandThe text was updated successfully, but these errors were encountered: