Merge branch 'release/1.0.0'

.appveyor.yml

@@ -0,0 +1,30 @@
+#---------------------------------#
+#  Build Image                    #
+#---------------------------------#
+image: Visual Studio 2017
+
+#---------------------------------#
+#  Build Script                   #
+#---------------------------------#
+build_script:
+  - ps: .\build.ps1 -Target AppVeyor
+
+# Tests
+test: off
+
+#---------------------------------#
+#        Branches to build        #
+#---------------------------------#
+branches:
+  # Whitelist
+  only:
+    - develop
+    - master
+    - /release/.*/
+    - /hotfix/.*/
+
+#---------------------------------#
+#  Build Cache                    #
+#---------------------------------#
+cache:
+- tools -> setup.cake

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.github/CODEOWNERS

@@ -0,0 +1,3 @@
+# These owners will be the default owners for everything in the repo and
+# will be requested for review when someone opens a pull request.
+*       @Speeedy01 @marco-bertschi @pascalberger @christianbumann @x-jokay @silanosa @georgesgoetz

.gitignore

@@ -299,8 +299,8 @@ __pycache__/
 *.pyc
 
 # Cake - Uncomment if you are using it
-# tools/**
-# !tools/packages.config
+tools/**
+!tools/packages.config
 
 # Tabs Studio
 *.tss
@@ -328,3 +328,8 @@ ASALocalRun/
 
 # MFractors (Xamarin productivity tool) working folder 
 .mfractor/
+
+# Project specific 
+
+config.wyam.*
+BuildArtifacts/

.mergify.yml

@@ -0,0 +1,5 @@
+pull_request_rules:
+  - name: delete head branch after merge
+    conditions: []
+    actions:
+      delete_head_branch: {}

GitReleaseManager.yaml

@@ -0,0 +1,12 @@
+issue-labels-include:
+- Breaking change
+- Feature
+- Bug
+- Improvement
+- Documentation
+issue-labels-exclude:
+- Build
+issue-labels-alias:
+    - name:    Documentation
+      header:  Documentation
+      plural:  Documentation

README.md

@@ -1,2 +1,36 @@
-# BBT.Strategy
-A strategy pattern implementation
+# BBT.StrategyPattern
+
+An strategy pattern implementation for .NET.
+
+[![License](http://img.shields.io/:license-mit-blue.svg)](https://github.com/bbtsoftware/BBT.StrategyPattern/blob/master/LICENSE)
+
+## Information
+
+| | Stable | Pre-release |
+|:--:|:--:|:--:|
+|GitHub Release|-|[![GitHub release](https://img.shields.io/github/release/bbtsoftware/BBT.StrategyPattern.svg)](https://github.com/bbtsoftware/BBT.StrategyPattern/releases/latest)|
+|NuGet|[![NuGet](https://img.shields.io/nuget/v/BBT.StrategyPattern.svg)](https://www.nuget.org/packages/BBT.StrategyPattern)|[![NuGet](https://img.shields.io/nuget/vpre/BBT.StrategyPattern.svg)](https://www.nuget.org/packages/BBT.StrategyPattern)|
+
+## Build Status
+
+|Develop|Master|
+|:--:|:--:|
+|[![Build status](https://ci.appveyor.com/api/projects/status/bncb5oc7ah2ti95y/branch/develop?svg=true)](https://ci.appveyor.com/project/BBTSoftwareAG/bbt-strategypattern/branch/develop)|[![Build status](https://ci.appveyor.com/api/projects/status/bncb5oc7ah2ti95y/branch/master?svg=true)](https://ci.appveyor.com/project/BBTSoftwareAG/bbt-strategypattern/branch/master)|
+
+## Code Coverage
+
+[![Coverage Status](https://coveralls.io/repos/github/bbtsoftware/BBT.StrategyPattern/badge.svg?branch=develop)](https://coveralls.io/github/bbtsoftware/BBT.StrategyPattern?branch=develop)
+
+## Quick Links
+
+* [Documentation](https://bbtsoftware.github.io/BBT.StrategyPattern/)
+
+## Build
+
+To build this package we are using [Cake](https://cakebuild.net).
+
+On Windows PowerShell run:
+
+```powershell
+./build
+```

build.ps1

@@ -0,0 +1,184 @@
+##########################################################################
+# This is the Cake bootstrapper script for PowerShell.
+# This file was downloaded from https://github.com/cake-build/resources
+# Feel free to change this file to fit your needs.
+##########################################################################
+
+<#
+.SYNOPSIS
+This is a Powershell script to bootstrap a Cake build.
+.DESCRIPTION
+This Powershell script will download NuGet if missing, restore NuGet tools (including Cake)
+and execute your Cake build script with the parameters you provide.
+.PARAMETER Script
+The build script to execute.
+.PARAMETER Target
+The build script target to run.
+.PARAMETER Configuration
+The build configuration to use.
+.PARAMETER Verbosity
+Specifies the amount of information to be displayed.
+.PARAMETER Experimental
+Tells Cake to use the latest Roslyn release.
+.PARAMETER WhatIf
+Performs a dry run of the build script.
+No tasks will be executed.
+.PARAMETER Mono
+Tells Cake to use the Mono scripting engine.
+.PARAMETER SkipToolPackageRestore
+Skips restoring of packages.
+.PARAMETER ScriptArgs
+Remaining arguments are added here.
+.LINK
+http://cakebuild.net
+#>
+
+[CmdletBinding()]
+Param(
+    [string]$Script = "setup.cake",
+    [string]$Target = "Default",
+    [ValidateSet("Release", "Debug")]
+    [string]$Configuration = "Release",
+    [ValidateSet("Quiet", "Minimal", "Normal", "Verbose", "Diagnostic")]
+    [string]$Verbosity = "Verbose",
+    [switch]$Experimental,
+    [Alias("DryRun","Noop")]
+    [switch]$WhatIf,
+    [switch]$Mono,
+    [switch]$SkipToolPackageRestore,
+    [Parameter(Position=0,Mandatory=$false,ValueFromRemainingArguments=$true)]
+    [string[]]$ScriptArgs
+)
+
+[Reflection.Assembly]::LoadWithPartialName("System.Security") | Out-Null
+function MD5HashFile([string] $filePath)
+{
+    if ([string]::IsNullOrEmpty($filePath) -or !(Test-Path $filePath -PathType Leaf))
+    {
+        return $null
+    }
+
+    [System.IO.Stream] $file = $null;
+    [System.Security.Cryptography.MD5] $md5 = $null;
+    try
+    {
+        $md5 = [System.Security.Cryptography.MD5]::Create()
+        $file = [System.IO.File]::OpenRead($filePath)
+        return [System.BitConverter]::ToString($md5.ComputeHash($file))
+    }
+    finally
+    {
+        if ($file -ne $null)
+        {
+            $file.Dispose()
+        }
+    }
+}
+
+Write-Host "Preparing to run build script..."
+
+if(!$PSScriptRoot){
+    $PSScriptRoot = Split-Path $MyInvocation.MyCommand.Path -Parent
+}
+
+$TOOLS_DIR = Join-Path $PSScriptRoot "tools"
+$NUGET_EXE = Join-Path $TOOLS_DIR "nuget.exe"
+$CAKE_EXE = Join-Path $TOOLS_DIR "Cake/Cake.exe"
+$NUGET_URL = "https://dist.nuget.org/win-x86-commandline/latest/nuget.exe"
+$PACKAGES_CONFIG = Join-Path $TOOLS_DIR "packages.config"
+$PACKAGES_CONFIG_MD5 = Join-Path $TOOLS_DIR "packages.config.md5sum"
+
+# Should we use mono?
+$UseMono = "";
+if($Mono.IsPresent) {
+    Write-Verbose -Message "Using the Mono based scripting engine."
+    $UseMono = "-mono"
+}
+
+# Should we use the new Roslyn?
+$UseExperimental = "";
+if($Experimental.IsPresent -and !($Mono.IsPresent)) {
+    Write-Verbose -Message "Using experimental version of Roslyn."
+    $UseExperimental = "-experimental"
+}
+
+# Is this a dry run?
+$UseDryRun = "";
+if($WhatIf.IsPresent) {
+    $UseDryRun = "-dryrun"
+}
+
+# Make sure tools folder exists
+if ((Test-Path $PSScriptRoot) -and !(Test-Path $TOOLS_DIR)) {
+    Write-Verbose -Message "Creating tools directory..."
+    New-Item -Path $TOOLS_DIR -Type directory | out-null
+}
+
+# Make sure that packages.config exist.
+if (!(Test-Path $PACKAGES_CONFIG)) {
+    Write-Verbose -Message "Downloading packages.config..."
+    try { (New-Object System.Net.WebClient).DownloadFile("http://cakebuild.net/download/bootstrapper/packages", $PACKAGES_CONFIG) } catch {
+        Throw "Could not download packages.config."
+    }
+}
+
+# Try find NuGet.exe in path if not exists
+if (!(Test-Path $NUGET_EXE)) {
+    Write-Verbose -Message "Trying to find nuget.exe in PATH..."
+    $existingPaths = $Env:Path -Split ';' | Where-Object { (![string]::IsNullOrEmpty($_)) -and (Test-Path $_) }
+    $NUGET_EXE_IN_PATH = Get-ChildItem -Path $existingPaths -Filter "nuget.exe" | Select -First 1
+    if ($NUGET_EXE_IN_PATH -ne $null -and (Test-Path $NUGET_EXE_IN_PATH.FullName)) {
+        Write-Verbose -Message "Found in PATH at $($NUGET_EXE_IN_PATH.FullName)."
+        $NUGET_EXE = $NUGET_EXE_IN_PATH.FullName
+    }
+}
+
+# Try download NuGet.exe if not exists
+if (!(Test-Path $NUGET_EXE)) {
+    Write-Verbose -Message "Downloading NuGet.exe..."
+    try {
+        (New-Object System.Net.WebClient).DownloadFile($NUGET_URL, $NUGET_EXE)
+    } catch {
+        Throw "Could not download NuGet.exe."
+    }
+}
+
+# Save nuget.exe path to environment to be available to child processed
+$ENV:NUGET_EXE = $NUGET_EXE
+
+# Restore tools from NuGet?
+if(-Not $SkipToolPackageRestore.IsPresent) {
+    Push-Location
+    Set-Location $TOOLS_DIR
+
+    # Check for changes in packages.config and remove installed tools if true.
+    [string] $md5Hash = MD5HashFile($PACKAGES_CONFIG)
+    if((!(Test-Path $PACKAGES_CONFIG_MD5)) -Or
+      ($md5Hash -ne (Get-Content $PACKAGES_CONFIG_MD5 ))) {
+        Write-Verbose -Message "Missing or changed package.config hash..."
+        Remove-Item * -Recurse -Exclude packages.config,nuget.exe
+    }
+
+    Write-Verbose -Message "Restoring tools from NuGet..."
+    $NuGetOutput = Invoke-Expression "&`"$NUGET_EXE`" install -ExcludeVersion -PreRelease -OutputDirectory `"$TOOLS_DIR`" -Source https://www.myget.org/F/cake/api/v3/index.json"
+
+    if ($LASTEXITCODE -ne 0) {
+        Throw "An error occured while restoring NuGet tools."
+    }
+    else
+    {
+        $md5Hash | Out-File $PACKAGES_CONFIG_MD5 -Encoding "ASCII"
+    }
+    Write-Verbose -Message ($NuGetOutput | out-string)
+    Pop-Location
+}
+
+# Make sure that Cake has been installed.
+if (!(Test-Path $CAKE_EXE)) {
+    Throw "Could not find Cake.exe at $CAKE_EXE"
+}
+
+# Start Cake
+Write-Host "Running build script..."
+Invoke-Expression "& `"$CAKE_EXE`" `"$Script`" -target=`"$Target`" -configuration=`"$Configuration`" -verbosity=`"$Verbosity`" $UseMono $UseDryRun $UseExperimental $ScriptArgs"
+exit $LASTEXITCODE