Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

SKR V1.4 don't load firmware #562

Open
killrob opened this issue Mar 26, 2022 · 1 comment
Open

SKR V1.4 don't load firmware #562

killrob opened this issue Mar 26, 2022 · 1 comment

Comments

@killrob
Copy link

killrob commented Mar 26, 2022 •
edited

Hi all,
my SKR V1.4 suddenly don't load frimware from TF card, is possible to load it via USB with Xloader or Ultimaker Cura? or how can i reset completely the board?
@radek8
Copy link

radek8 commented Mar 27, 2022 •
edited

Try reformatting the card to FAT32, or try another card (preferably 8GB or less). Try more SD cards.

As a last resort, it should go upload via ST-Link.
#346

Or use a modified botloader and then it should go upload via USB.
But I haven't tried it personally.

https://github.com/ardiehl/BTT_SKR_13_14_14T_SD-DFU-Bootloader
https://github.com/GadgetAngel/BTT_SKR_13_14_14T_SD-DFU-Bootloader

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@killrob @radek8