Skip to content

Latest commit

 

History

History
44 lines (29 loc) · 1.52 KB

README.md

File metadata and controls

44 lines (29 loc) · 1.52 KB

CPM-based blinky project: lpc43xx (m4 core, using bootloader)

Simple Blinky program for the LPC4337 using CPM chip libraries.

This projects assumes our specific breakout board for the LPC4337 chip, however it is easily adapted to different board configurations.

NOTE: this project assumes a flash-based lpc43xx microcontroller, such as the lpc4337. (there are also flashless lpc43xx microcontrollers that don't have internal flash memory).

NOTE this project assumes you are running a compatible bootloader, for example the bootloader43xx_sdcard

How To Use

Prerequisites

These need to be installed and available in your PATH.

Build the firmware:

Clone the project, and inside the project folder do:

mkdir build
cd build
cmake ..
make

Flash the firware to your board

This assumes you have openocd installed.

Also, note that this project assumes a bootloader is used (see the bootloader43xx_sdcard for example). To use this firmware directly without any bootloader, simply edit link.ld and CMakeLists.txt and replace 0x1A008000 with 0x1A000000 (this is the address in flash where the firmware is placed).

run this from the build dir, see build step

make flash

If everything went right, the firmware should be running and blinking some LEDS.