Feedback and sensors are not working - indoor Cam Pan&Tilt 2K (T8410)

[DivanX10]

Camera indoor Cam Pan&Tilt 2K (T8410)

The latest version of eufy-security 0.5.2 is installed. The camera control partially works (listed below what works and what does not work) and the feedback does not work. If I turn it on or off via the mobile app, the value in iobroker will not change from true to false, is this how it should be or should it not be?

Установлена последняя версия eufy-security 0.5.2. Управление камерой частично работает (ниже перечислил что работает, а что не работает) и не работает обратная связь. Если я через мобильное приложение включу или выключу, то в iobroker не будет меняться значение с true на false, это так и должно быть или так не должно быть?

Can you add PTZ to control the camera?
Можете ли добавить PTZ для управления камерой?

These functions work
Эти функции работают
Actions:
Enable/disable device
Enable/disable auto night vision
Enable/disable led
Enable/disable motion detection
Enable/disable pet detection
Enable/disable sound detection
Enable/disable RTSP stream

These functions do not work, all the time false
Эти функции не работают, все время false
Events:
Motion detected
Person detected
Crying detected
Sound detected
Pet detected

[bropat]

Hi @DivanX10,

thank you for the feedback!

If I turn it on or off via the mobile app, the value in iobroker will not change from true to false, is this how it should be or should it not be?

Unfortunately, this change is not communicated via any interface, so that only the polling interval (adjustable, default: 10 min.) is effective here, which polls the status every X minutes.

Can you add PTZ to control the camera?

I will try to implement this feature as already requested in issue #129

These functions do not work, all the time false

You are right, found the bug. Will be fixed in the next version.

[DivanX10]

Unfortunately, this change is not communicated via any interface, so that only the polling interval (adjustable, default: 10 min.) is effective here, which polls the status every X minutes.

I have set and tried different polling intervals from 1 to 20 minutes and the status does not change. Maybe it's all about the selected region in the eufy-security app itself, or does it not matter? I have selected the region Russia
Я устанавливал и пробовал разные интервалы опроса от 1 до 20 минут и статус не меняется. Может все дело в выбранном регионе, в самом приложении eufy-security или это не имеет значения? У меня выбран регион Россия

[bropat]

I can't say at the moment. Will look into the matter.

[bropat]

@DivanX10
Now it should work correctly (as described above).

Let me know.

[DivanX10]

@bropat ok, thanks. I will check and be sure to unsubscribe

[DivanX10]

I don't have a dog and only checked these Motion\Person\Sound sensors. The sensors work, but one Sound detected sensor for some reason does not transmit false\true messages, while the Motion\Person sensors transmit messages

All sensors work in iobroker
Motion detected - Works, the topics have the values false\true
Person detected - Works, the topics have the values false\true
Sound detected - The sensor itself works. The false\true statuses change. Only passing false\true values via MQTT does not work

In order for the sensors to start working, you need to enable them in the settings

[DivanX10]

Feedback doesn't work or you didn't fix it and only made the sensors work?
Обратная связь не работает или вы это не исправляли и сделали только работу сенсоров?

[DivanX10]

Closing it. Feedback and sensors are working