- Overview
- How does it work
- Architecture
- Installation
- Sample Buildkite Pipeline
- Securing the stack
- How to setup agent hooks
- Debugging
- Open Questions
A Kubernetes controller that runs Buildkite steps as Kubernetes jobs.
The controller uses the Buildkite GraphQL API to watch for scheduled work that uses the kubernetes
plugin.
When a job is available, the controller will create a pod to acquire and run the job. It converts the PodSpec in the kubernetes
plugin into a pod by:
- adding an init container to:
- copy the agent binary onto the workspace volume
- adding a container to run the buildkite agent
- adding a container to clone the source repository
- modifying the user-specified containers to:
- overwrite the entrypoint to the agent binary
- run with the working directory set to the workspace
The entrypoint rewriting and ordering logic is heavily inspired by the approach used in Tekton.
sequenceDiagram
participant bc as buildkite controller
participant gql as Buildkite GraphQL API
participant bapi as Buildkite API
participant kubernetes
bc->>gql: Get scheduled builds & jobs
gql-->>bc: {build: jobs: [{uuid: "abc"}]}
kubernetes->>pod: start
bc->>kubernetes: watch for pod completions
bc->>kubernetes: create pod with agent sidecar
kubernetes->>pod: create
pod->>bapi: agent accepts & starts job
pod->>pod: run sidecars
pod->>pod: agent bootstrap
pod->>pod: run user pods to completion
pod->>bapi: upload artifacts, exit code
pod->>pod: agent exit
kubernetes->>bc: pod completion event
bc->>kubernetes: cleanup finished pods
- A Kubernetes cluster
- An API token with the GraphQL scope enabled
- An agent token
The simplest way to get up and running is by deploying our Helm chart:
helm upgrade --install agent-stack-k8s oci://ghcr.io/buildkite/helm/agent-stack-k8s \
--create-namespace \
--namespace buildkite \
--set config.org=<your Buildkite org slug> \
--set agentToken=<your Buildkite agent token> \
--set graphqlToken=<your Buildkite GraphQL-enabled API token>
If you are using Buildkite Clusters to isolate sets of pipelines from each other, you will need to specify the cluster's UUID in the configuration for the controller. This may be done using a flag on the helm
command like so: --set config.cluster-uuid=<your cluster's UUID>
, or an entry in a values file.
# values.yaml
config:
cluster-uuid: beefcafe-abbe-baba-abba-deedcedecade
The cluster's UUID may be obtained by navigating to the clusters page, clicking on the relevant cluster and then clicking on "Settings". It will be in a section titled "GraphQL API Integration".
Note
Don't confuse the Cluster UUID with the UUID for the Queue. See the docs for an explanation.
We're using Helm's support for OCI-based registries, which means you'll need Helm version 3.8.0 or newer.
This will create an agent-stack-k8s installation that will listen to the kubernetes
queue.
See the --tags
option for specifying a different queue.
Usage:
agent-stack-k8s [flags]
agent-stack-k8s [command]
Available Commands:
completion Generate the autocompletion script for the specified shell
help Help about any command
lint A tool for linting Buildkite pipelines
version Prints the version
Flags:
--agent-token-secret string name of the Buildkite agent token secret (default "buildkite-agent-token")
--buildkite-token string Buildkite API token with GraphQL scopes
--cluster-uuid string UUID of the Buildkite Cluster. The agent token must be for the Buildkite Cluster.
-f, --config string config file path
--debug debug logs
-h, --help help for agent-stack-k8s
--image string The image to use for the Buildkite agent (default "ghcr.io/buildkite/agent:3.75.1")
--image-pull-backoff-grace-period duration Duration after starting a pod that the controller will wait before considering cancelling a job due to ImagePullBackOff (e.g. when the podSpec specifies container images that cannot be pulled) (default 30s)
--job-ttl duration time to retain kubernetes jobs after completion (default 10m0s)
--max-in-flight int max jobs in flight, 0 means no max (default 25)
--namespace string kubernetes namespace to create resources in (default "default")
--org string Buildkite organization name to watch
--poll-interval duration time to wait between polling for new jobs (minimum 1s); note that increasing this causes jobs to be slower to start (default 1s)
--profiler-address string Bind address to expose the pprof profiler (e.g. localhost:6060)
--prohibit-kubernetes-plugin Causes the controller to prohibit the kubernetes plugin specified within jobs (pipeline YAML) - enabling this causes jobs with a kubernetes plugin to fail, preventing the pipeline YAML from having any influence over the podSpec
--tags strings A comma-separated list of agent tags. The "queue" tag must be unique (e.g. "queue=kubernetes,os=linux") (default [queue=kubernetes])
Use "agent-stack-k8s [command] --help" for more information about a command.
Configuration can also be provided by a config file (--config
or CONFIG
), or environment variables. In the examples folder there is a sample YAML config and a sample dotenv config.
You can also have an external provider create a secret for you in the namespace before deploying the chart with helm. If the secret is pre-provisioned, replace the agentToken
and graphqlToken
arguments with:
--set agentStackSecret=<secret-name>
The format of the required secret can be found in this file.
You can also use this chart as a dependency:
dependencies:
- name: agent-stack-k8s
version: "0.5.0"
repository: "oci://ghcr.io/buildkite/helm"
or use it as a template:
helm template oci://ghcr.io/buildkite/helm/agent-stack-k8s -f my-values.yaml
Available versions and their digests can be found on the releases page.
For simple commands, you merely have to target the queue you configured agent-stack-k8s with.
steps:
- label: Hello World!
command: echo Hello World!
agents:
queue: kubernetes
For more complicated steps, you have access to the PodSpec
Kubernetes API resource that will be used in a Kubernetes Job
.
For now, this is nested under a kubernetes
plugin.
But unlike other Buildkite plugins, there is no corresponding plugin repository.
Rather, this is syntax that is interpreted by the agent-stack-k8s
controller.
steps:
- label: Hello World!
agents:
queue: kubernetes
plugins:
- kubernetes:
podSpec:
containers:
- image: alpine:latest
command:
- echo
- Hello World!
Note that in a podSpec
, a command
should be YAML list that will be combined into a single command for a container to run.
Almost any container image may be used, but it MUST have a POSIX shell available to be executed at /bin/sh
.
It's also possible to specify an entire script as a command
steps:
- label: Hello World!
agents:
queue: kubernetes
plugins:
- kubernetes:
podSpec:
containers:
- image: alpine:latest
command:
- |-
set -euo pipefail
echo Hello World! > hello.txt
cat hello.txt | buildkite-agent annotate
If you have a multi-line command
, specifying the args
as well could lead to confusion, so we recommend just using command
.
More samples can be found in the integration test fixtures directory.
To use SSH to clone your repos, you'll need to add a secret reference via an EnvFrom to your pipeline to specify where to mount your SSH private key from.
Place this object under a gitEnvFrom
key in the kubernetes
plugin (see the example below).
You should create a secret in your namespace with an environment variable name that's recognised by docker-ssh-env-config
.
A script from this project is included in the default entrypoint of the default buildkite/agent
Docker image.
It will process the value of the secret and write out a private key to the ~/.ssh
directory of the checkout container.
However this key will not be available in your job containers. If you need to use git ssh credentials in your job containers, we recommend one of the following options:
- Use a container image that's based on the default
buildkite/agent
docker image and preserve the default entrypoint by not overriding the command in the job spec. - Include or reproduce the functionality of the
ssh-env-config.sh
script in the entrypoint for your job container image
You most likely want to use a more secure method of managing k8s secrets. This example is illustrative only.
Supposing a SSH private key has been created and its public key has been registered with the remote repository provider (e.g. GitHub).
kubectl create secret generic my-git-ssh-credentials --from-file=SSH_PRIVATE_DSA_KEY="$HOME/.ssh/id_ecdsa"
Then the following pipeline will be able to clone a git repository that requires ssh credentials.
steps:
- label: build image
agents:
queue: kubernetes
plugins:
- kubernetes:
gitEnvFrom:
- secretRef:
name: my-git-ssh-credentials # <----
podSpec:
containers:
- image: gradle:latest
command: [gradle]
args:
- jib
- --image=ttl.sh/example:1h
To use HTTPS to clone private repos, you can use a .git-credentials
file stored in a secret, and
refer to this secret using the gitCredentialsSecret
checkout parameter.
By default, this secret is only attached, and Git is only configured to use it, within the
checkout
container. It will not necessarily be available in your job containers.
If you need the .git-credentials
file inside the other containers as well, you can add a volume
mount for the git-credentials
volume, and configure Git to use the file within it (e.g. with
git config credential.helper 'store --file ...'
)
Once again, this example is illustrative only.
First, create a Kubernetes secret containing the key .git-credentials
, formatted in the manner
expected by the store
Git credendial helper:
kubectl create secret generic my-git-credentials --from-file='.git-credentials'="$HOME/.git-credentials"
Then you can use the checkout/gitCredentialsSecret
(in your pipeline) or
default-checkout-params/gitCredentialsSecret
(in values.yaml) to reference the secret volume
source:
# pipeline.yaml
steps:
- label: build image
agents:
queue: kubernetes
plugins:
- kubernetes:
checkout:
gitCredentialsSecret:
secretName: my-git-credentials # <----
podSpec:
...
# values.yaml
...
default-checkout-params:
gitCredentialsSecret:
secretName: my-git-credentials
...
If you wish to use a different key within the secret than .git-credentials
, you can
project it
to .git-credentials
by using items
within gitCredentialsSecret
.
# values.yaml
...
default-checkout-params:
gitCredentialsSecret:
secretName: my-git-credentials
items:
- key: funky-creds
path: .git-credentials
...
Rather than defining the entire Pod Spec in a step, there is the option to define a strategic merge patch in the controller.
Agent Stack K8s will first generate a K8s Job with a PodSpec from a Buildkite Job and then apply the patch in the controller.
It will then apply the patch specified in its config file, which is derived from the value in the helm installation.
This can replace much of the functionality of some of the other fields in the plugin, like gitEnvFrom
.
Here's an example demonstrating how one would eliminate the need to specify gitEnvFrom
from every step, but still checkout private repositories.
First, deploy the helm chart with a values.yaml
file.
# values.yaml
agentStackSecret: <name of predefined secrets for k8s>
config:
org: <your-org-slug>
pod-spec-patch:
containers:
- name: checkout # <---- this is needed so that the secret will only be mounted on the checkout container
envFrom:
- secretRef:
name: git-checkout # <---- this is the same secret name you would have put in `gitEnvFrom` in the kubernetes plugin
You may use the -f
or --values
arguments to helm upgrade
to specify a values.yaml
file.
helm upgrade --install agent-stack-k8s oci://ghcr.io/buildkite/helm/agent-stack-k8s \
--create-namespace \
--namespace buildkite \
--values values.yaml \
--version <agent-stack-k8s version>
Now, with this setup, we don't even need to specify the kubernetes
plugin to use Agent Stack K8s with a private repo
# pipelines.yaml
agents:
queue: kubernetes
steps:
- name: Hello World!
commands:
- echo -n Hello!
- echo " World!"
- name: Hello World in one command
command: |-
echo -n Hello!
echo " World!"
You can specify a different image to use for a step in a step level podSpecPatch
. Previously this could be done with a step level podSpec
.
# pipelines.yaml
agents:
queue: kubernetes
steps:
- name: Hello World!
commands:
- echo -n Hello!
- echo " World!"
plugins:
- kubernetes:
podSpecPatch:
- name: container-0
image: alpine:latest
- name: Hello World from alpine!
commands:
- echo -n Hello
- echo " from alpine!"
plugins:
- kubernetes:
podSpecPatch:
- name: container-0 # <---- You must specify this as exactly `container-0` for now.
image: alpine:latest # We are experimenting with ways to make it more ergonomic
In the helm values, you can specify default resources to be used by the containers in Pods that are launched to run Jobs.
# values.yaml
agentStackSecret: <name of predefend secrets for k8s>
config:
org: <your-org-slug>
pod-spec-patch:
initContainers:
- name: copy-agent
requests:
cpu: 100m
memory: 50Mi
limits:
memory: 100Mi
containers:
- name: agent # this container acquires the job
resources:
requests:
cpu: 100m
memory: 50Mi
limits:
memory: 1Gi
- name: checkout # this container clones the repo
resources:
requests:
cpu: 100m
memory: 50Mi
limits:
memory: 1Gi
- name: container-0 # the job runs in a container with this name by default
resources:
requests:
cpu: 100m
memory: 50Mi
limits:
memory: 1Gi
and then every job that's handled by this installation of agent-stack-k8s will default to these values. To override it for a step, use a step level podSpecPatch
.
# pipelines.yaml
agents:
queue: kubernetes
steps:
- name: Hello from a container with more resources
command: echo Hello World!
plugins:
- kubernetes:
podSpecPatch:
containers:
- name: container-0 # <---- You must specify this as exactly `container-0` for now.
resources: # We are experimenting with ways to make it more ergonomic
requests:
cpu: 1000m
memory: 50Mi
limits:
memory: 1Gi
- name: Hello from a container with default resources
command: echo Hello World!
Sidecar containers can be added to your job by specifying them under the top-level sidecars
key. See this example for a simple job that runs nginx
as a sidecar, and accesses the nginx server from the main job.
There is no guarantee that your sidecars will have started before your job, so using retries or a tool like wait-for-it is a good idea to avoid flaky tests.
In some situations, for example if you want to use git mirrors you may want to attach extra volume mounts (in addition to the /workspace
one) in all the pod containers.
See this example, that will declare a new volume in the podSpec
and mount it in all the containers. The benefit, is to have the same mounted path in all containers, including the checkout
container.
For some steps, you may wish to avoid checkout (cloning a source repository).
This can be done with the checkout
block under the kubernetes
plugin:
steps:
- label: Hello World!
agents:
queue: kubernetes
plugins:
- kubernetes:
checkout:
skip: true # prevents scheduling the checkout container
git clone
and git fetch
flags can be overridden per-step (similar to BUILDKITE_GIT_CLONE_FLAGS
and BUILDLKITE_GIT_FETCH_FLAGS
env vars) with the checkout
block also:
steps:
- label: Hello World!
agents:
queue: kubernetes
plugins:
- kubernetes:
checkout:
cloneFlags: -v --depth 1
fetchFlags: -v --prune --tags
With the unstructured nature of Buildkite plugin specs, it can be frustratingly easy to mess up your configuration and then have to debug why your agent pods are failing to start. To help prevent this sort of error, there's a linter that uses JSON schema to validate the pipeline and plugin configuration.
This currently can't prevent every sort of error, you might still have a reference to a Kubernetes volume that doesn't exist, or other errors of that sort, but it will validate that the fields match the API spec we expect.
Our JSON schema can also be used with editors that support JSON Schema by configuring your editor to validate against the schema found here.
Suppose you want to enforce the podSpec used for all jobs at the controller level, and prevent users from setting or overriding that podSpec (or various other parameters) through use of the kubernetes plugin.
This can be achieved with prohibit-kubernetes-plugin
, either as a controller flag or within the config values.yaml
:
# values.yaml
...
config:
prohibit-kubernetes-plugin: true
pod-spec-patch:
# Override the default podSpec here.
...
With prohibit-kubernetes-plugin
enabled, any job containing the kubernetes plugin will fail.
This section explains how to setup agent hooks when running Agent Stack K8s. In order for the agent hooks to work, they must be present on the instances where the agent runs.
In case of agent-stack-k8s, we need these hooks to be accessible to the kubernetes pod where the checkout
and command
containers will be running. Best way to make this happen is to create a configmap with the agent hooks and mount the configmap as volume to the containers.
Here is the command to create configmap
which will have agent hooks in it:
kubectl create configmap buildkite-agent-hooks --from-file=/tmp/hooks -n buildkite
We have all the hooks under directory /tmp/hooks
and we are creating configmap
with name buildkite-agent-hooks
in buildkite
namespace in the k8s cluster.
Here is how to make these hooks in configmap available to the containers. Here is the pipeline config for setting up agent hooks:
steps:
- label: ':pipeline: Pipeline Upload'
agents:
queue: kubernetes
plugins:
- kubernetes:
extraVolumeMounts:
- mountPath: /buildkite/hooks
name: agent-hooks
podSpec:
containers:
- command:
- echo
- hello-world
image: alpine:latest
env:
- name: BUILDKITE_HOOKS_PATH
value: /buildkite/hooks
volumes:
- configMap:
defaultMode: 493
name: buildkite-agent-hooks
name: agent-hooks
There are 3 main aspects we need to make sure that happen for hooks to be available to the containers in agent-stack-k8s
.
-
Define env
BUILDKITE_HOOKS_PATH
with the pathagent
andcheckout
containers will look for hooksenv: - name: BUILDKITE_HOOKS_PATH value: /buildkite/hooks
-
Define
VolumeMounts
usingextraVolumeMounts
which will be the path where the hooks will be mounted to with in the containersextraVolumeMounts: - mountPath: /buildkite/hooks name: agent-hooks
-
Define
volumes
where the configmap will be mountedvolumes: - configMap: defaultMode: 493 name: buildkite-agent-hooks name: agent-hooks
Note: Here defaultMode
493
is setting the Unix permissions to755
which enables the hooks to be executable. Also another way to make this hooks directory available to containers is to use hostPath mount but it is not a recommended approach for production environments.
Now when we run this pipeline agent hooks will be available to the container and will run them.
Key difference we will notice with hooks execution with agent-stack-k8s
is that environment hooks will execute twice, but checkout-related hooks such as pre-checkout
, checkout
and post-checkout
will only be executed once in the checkout
container. Similarly the command-related hooks like pre-command
, command
and post-command
hooks will be executed once by the command
container(s).
If the env BUILDKITE_HOOKS_PATH
is set at pipeline level instead of container like shown in above pipeline config then hooks will run for both checkout
container and command
container(s).
Here is the pipeline config where env BUILDKITE_HOOKS_PATH
is exposed to all containers in the pipeline:
steps:
- label: ':pipeline: Pipeline Upload'
env:
BUILDKITE_HOOKS_PATH: /buildkite/hooks
agents:
queue: kubernetes
plugins:
- kubernetes:
extraVolumeMounts:
- mountPath: /buildkite/hooks
name: agent-hooks
podSpec:
containers:
- command:
- echo
- hello-world
image: alpine:latest
volumes:
- configMap:
defaultMode: 493
name: buildkite-agent-hooks
name: agent-hooks
This is because agent-hooks will be present in both containers and environment
hook will run in both containers. Here is how the build output will look like:
Running global environment hook
Running global pre-checkout hook
Preparing working directory
Running global post-checkout hook
Running global environment hook
Running commands
Running global pre-exit hook
In scenarios where we want to skip checkout
when running on agent-stack-k8s
, it will cause checkout-related hooks such as pre-checkout, checkout and post-checkout not to run because checkout
container will not be present when skip checkout
is set.
Here is the pipeline config where checkout is skipped:
steps:
- label: ':pipeline: Pipeline Upload'
env:
BUILDKITE_HOOKS_PATH: /buildkite/hooks
agents:
queue: kubernetes
plugins:
- kubernetes:
checkout:
skip: true
extraVolumeMounts:
- mountPath: /buildkite/hooks
name: agent-hooks
podSpec:
containers:
- command:
- echo
- hello-world
image: alpine:latest
volumes:
- configMap:
defaultMode: 493
name: buildkite-agent-hooks
name: agent-hooks
Now, if we look at the build output below, we can see that it only has environment
and pre-exit
that ran and no checkout-related hooks, unlike the earlier build output where checkout was not skipped.
Preparing working directory
Running global environment hook
Running commands
Running global pre-exit hook
Use the log-collector
script in the utils
folder to collect logs for agent-stack-k8s.
- kubectl binary
- kubectl setup and authenticated to correct k8s cluster
k8s namespace where you deployed agent stack k8s and where you expect their k8s jobs to run.
Buildkite job id for which you saw issues.
The script will collect kubectl describe of k8s job, pod and agent stack k8s controller pod.
It will also capture kubectl logs of k8s pod for the Buildkite job, agent stack k8s controller pod and package them in a tar archive which you can send via email to support@buildkite.com.
- How to deal with stuck jobs? Timeouts?
- How to deal with pod failures (not job failures)?
- Report failure to buildkite from controller?
- Emit pod logs to buildkite? If agent isn't starting correctly
- Retry?