pip install pybullet_planning error with Ghalton

[harrybennett96]

Hi, just trying to install pybullet_planning and get a feel for the toolkit as per the readocs but I keep running into the following when I execute pip install pybullet_planning.

I noticed that this is an open issue with Ghalton on their page (fmder/ghalton#16) and was wondering if anyone else has run into this issue? I've attempted to follow the suggestions on this link but no luck so far :(.

ctory-gen-arm/pybullet-planning$ pip install pybullet_planning
Collecting pybullet_planning
Using cached pybullet_planning-0.6.0-py2.py3-none-any.whl (131 kB)
Collecting imageio
Using cached imageio-2.27.0-py3-none-any.whl (3.4 MB)
Collecting termcolor
Using cached termcolor-2.2.0-py3-none-any.whl (6.6 kB)
Collecting ghalton
Using cached ghalton-0.6.2.tar.gz (124 kB)
Preparing metadata (setup.py) ... done
Collecting psutil
Using cached psutil-5.9.4-cp36-abi3-manylinux_2_12_x86_64.manylinux2010_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (280 kB)
Requirement already satisfied: scipy in /home/harry/software-projects/trajectory-generation/trajectory-gen-arm/lib/python3.10/site-packages (from pybullet_planning) (1.10.1)
Collecting meshio>=4.3.11
Using cached meshio-5.3.4-py3-none-any.whl (167 kB)
Requirement already satisfied: pybullet>=3.1.7 in /home/harry/software-projects/trajectory-generation/trajectory-gen-arm/lib/python3.10/site-packages (from pybullet_planning) (3.2.5)
Requirement already satisfied: recordclass in /home/harry/software-projects/trajectory-generation/trajectory-gen-arm/lib/python3.10/site-packages (from pybullet_planning) (0.18.3)
Requirement already satisfied: numpy in /home/harry/software-projects/trajectory-generation/trajectory-gen-arm/lib/python3.10/site-packages (from pybullet_planning) (1.24.2)
Collecting rich
Using cached rich-13.3.3-py3-none-any.whl (238 kB)
Requirement already satisfied: pillow>=8.3.2 in /home/harry/software-projects/trajectory-generation/trajectory-gen-arm/lib/python3.10/site-packages (from imageio->pybullet_planning) (9.4.0)
Collecting pygments<3.0.0,>=2.13.0
Using cached Pygments-2.14.0-py3-none-any.whl (1.1 MB)
Collecting markdown-it-py<3.0.0,>=2.2.0
Using cached markdown_it_py-2.2.0-py3-none-any.whl (84 kB)
Collecting mdurl~=0.1
Using cached mdurl-0.1.2-py3-none-any.whl (10.0 kB)
Building wheels for collected packages: ghalton
Building wheel for ghalton (setup.py) ... error
error: subprocess-exited-with-error

× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [16 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-310
creating build/lib.linux-x86_64-cpython-310/ghalton
copying ghalton/constants.py -> build/lib.linux-x86_64-cpython-310/ghalton
copying ghalton/init.py -> build/lib.linux-x86_64-cpython-310/ghalton
copying ghalton/ghalton_wrapper.py -> build/lib.linux-x86_64-cpython-310/ghalton
running build_ext
building 'ghalton._ghalton_wrapper' extension
creating build/temp.linux-x86_64-cpython-310
creating build/temp.linux-x86_64-cpython-310/src
x86_64-linux-gnu-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -I/home/harry/software-projects/trajectory-generation/trajectory-gen-arm/include -I/usr/include/python3.10 -c src/Halton.cpp -o build/temp.linux-x86_64-cpython-310/src/Halton.o -stdlib=libc++
x86_64-linux-gnu-gcc: error: unrecognized command-line option ‘-stdlib=libc++’
error: command '/usr/bin/x86_64-linux-gnu-gcc' failed with exit code 1
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for ghalton
Running setup.py clean for ghalton
Failed to build ghalton
Installing collected packages: ghalton, termcolor, pygments, psutil, mdurl, imageio, markdown-it-py, rich, meshio, pybullet_planning
Running setup.py install for ghalton ... error
error: subprocess-exited-with-error

× Running setup.py install for ghalton did not run successfully.
│ exit code: 1
╰─> [18 lines of output]
running install
/home/harry/software-projects/trajectory-generation/trajectory-gen-arm/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-310
creating build/lib.linux-x86_64-cpython-310/ghalton
copying ghalton/constants.py -> build/lib.linux-x86_64-cpython-310/ghalton
copying ghalton/init.py -> build/lib.linux-x86_64-cpython-310/ghalton
copying ghalton/ghalton_wrapper.py -> build/lib.linux-x86_64-cpython-310/ghalton
running build_ext
building 'ghalton._ghalton_wrapper' extension
creating build/temp.linux-x86_64-cpython-310
creating build/temp.linux-x86_64-cpython-310/src
x86_64-linux-gnu-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -I/home/harry/software-projects/trajectory-generation/trajectory-gen-arm/include -I/usr/include/python3.10 -c src/Halton.cpp -o build/temp.linux-x86_64-cpython-310/src/Halton.o -stdlib=libc++
x86_64-linux-gnu-gcc: error: unrecognized command-line option ‘-stdlib=libc++’
error: command '/usr/bin/x86_64-linux-gnu-gcc' failed with exit code 1
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> ghalton

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

[yijiangh]

@harrybennett96 I experienced the same issue for python 3.10. Please try python 3.8.