High-Performance Thermo-Hydro-Mechanical Code (CB-Geo thm)

CB-Geo Computational Geomechanics Research Group

Documentation

Please refer to CB-Geo thm Documentation for information on compiling, and running the code. The documentation also include the thm theory.

Install dependencies

• Docker image for CB-Geo thm code https://hub.docker.com/r/cbgeo/thm

• Instructions for running thm docker container: https://github.com/cb-geo/docker-thm/blob/master/README.md.

Prerequisite packages

The following prerequisite packages can be found in the docker image:

• Boost
• Dealii

Compile

See https://thm-doc.cb-geo.com/ for more detailed instructions.

0. Run mkdir build && cd build && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_CXX_COMPILER=g++ -DDEAL_II_DIR=/path/to/dealii/ ..

1. Run make clean && make -jN (where N is the number of cores).

Compile and Run on TACC

#login TACC
ssh taccuserid@ls5.tacc.utexas.edu

module load impi-largemem
export CC=icc
export CXX=icpc

# Compile PETSc 3.13
wget http://ftp.mcs.anl.gov/pub/petsc/release-snapshots/petsc-3.13.3.tar.gz 
tar -xvzf petsc-3.13.3.tar.gz
cd petsc-3.13.3/
export PETSC_ARCH=clx
export PETSC_DIR=$HOME/petsc-3.13.3
./config/configure.py --with-shared=1 --with-x=0 --with-mpi=1 --with-debugging=0 --with-blas-lapack-dir=$TACC_MKL_LIB -COPTFLAGS=O2 -CXXOPTFLAGS=O2 -FOPTFLAGS=O2
make PETSC_DIR=$HOME/petsc-3.13.3 PETSC_ARCH=clx all -j4
make PETSC_DIR=$HOME/petsc-3.13.3 PETSC_ARCH=clx check -j4

# METIS
cd $HOME
wget http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/metis-5.1.0.tar.gz && \
    tar -xf metis-5.1.0.tar.gz && \
    cd metis-5.1.0/ && \
    make config shared=1 cc=icc cxx=icpc prefix=$HOME/metis && \
    make install -j4 && cd ..

# Install P4EST
cd $HOME
export CC=mpicc
export CXX=mpicxx
mkdir p4est && cd p4est
wget https://p4est.github.io/release/p4est-2.2.tar.gz
wget https://www.dealii.org/current/external-libs/p4est-setup.sh
chmod u+x p4est-setup.sh
./p4est-setup.sh p4est-2.2.tar.gz $HOME/p4est

# Load module boost
module load boost

# Clone and compile dealii
cds
module load impi-largemem
export CC=icc
export CXX=icpc
git clone https://github.com/dealii/dealii --depth=1 dealii-src
cd dealii-src/ && mkdir build &&  cd build
cmake -DCMAKE_INSTALL_PREFIX=$SCRATCH/dealii -DPETSC_DIR=$HOME/petsc-3.13.3 -DPETSC_ARCH=clx -DP4EST_DIR=$HOME/p4est -DDEAL_II_WITH_P4EST=ON -DDEAL_II_WITH_PETSC=On  -DDEAL_II_WITH_METIS=On -DMETIS_DIR=$HOME/metis/ -DDEAL_II_WITH_MPI=On ..
make install -j4


# Clone THM
cds
git clone https://github.com/cb-geo/thm
cd thm
git checkout thm_seg_parallel
mkdir build && cd build
cmake -DCMAKE_BUILD_TYPE=Release -DDEAL_II_DIR=$SCRATCH/dealii/ ..
make -j

To run on TACC on multiple nodes create a submission script

touch submit

and update the submission script as:

#!/bin/bash
#SBATCH -J thm-N1n2      # job name
#SBATCH -o thm-N1n2.o%j  # output and error file name (%j expands to jobID)
#SBATCH -A Material-Point-Metho # Project
#SBATCH -N 1             # number of nodes requested
#SBATCH -n 2             # total number of mpi tasks requested
#SBATCH -p normal     # queue (partition) -- normal, development, etc.
#SBATCH -t 00:15:00       # run time (hh:mm:ss) - 10 hours
# Slurm email notifications are now working on Lonestar 5
#SBATCH --mail-type=fail   # email me when the job fails
# run the executable named a.out
module load boost
export CC=icc
export CXX=icpc
ibrun ./thm

Then submit the job using: sbatch submit

sbatch submit

# This command offers similar functions as showq, but has more options. To monitor the 
# statues of the jobs you have submitted, use 

squeue -u CRSid 

# or use 

showq -u 

# to monitor status of the jobs.

# If want to cancel the squeue

scancel <jobid>

# if want to see the utilization of computer
wwall -j <jobid>
# to see the path of scratch
echo $SCRATCH

# to see the data folder
cd $SCRATCH

SCREEN

# You can use SCREEN to safely detach from the SSH session without exiting the remote job. It is helpful for people who are working with 
# multiple remote servers. TACC has installed SCREEN. You can directly call it by:
screen

# To exit from the screen session, you just press "Ctrl-A" followed by "d". You will see an output below:
[detached from 1371.pts-0.server]

# After detaching from the screen session, you can log out from the remote system. The juo will keep running. If you want to re-attach to 
# some screen session, you can call:
screen -r [session ID]
# for example
screen -r 1371

# To see the session ID, you may call 
screen -ls
# then choose which screen session you want ot log in.

# For more details, refer man pages
man screen