From b74ba28c6b69cdaae967b2ad33f3bee5cd88542a Mon Sep 17 00:00:00 2001 From: Madhu Rajanna Date: Tue, 29 Aug 2023 11:59:16 +0200 Subject: [PATCH] doc: add design doc for QoS Add design doc for QoS for rbd devices mapped with both krbd and rbd-nbd closes: #521 Signed-off-by: Madhu Rajanna --- docs/design/proposals/rbd-qos.md | 271 +++++++++++++++++++++++++++++++ 1 file changed, 271 insertions(+) create mode 100644 docs/design/proposals/rbd-qos.md diff --git a/docs/design/proposals/rbd-qos.md b/docs/design/proposals/rbd-qos.md new file mode 100644 index 00000000000..075c6aaa555 --- /dev/null +++ b/docs/design/proposals/rbd-qos.md @@ -0,0 +1,271 @@ +# Design Doc for RBD QoS using cgroup v2 + +## Introduction + +The RBD QoS (Quality of Service) design aims to address the issue of IO noisy +neighbor problems encountered in early Ceph deployments catering to OpenStack +environments. These problems were effectively managed by implementing QEMU +throttling at the virtio-blk/scsi level. To further enhance this, +capacity-based IOPS were introduced, providing a more dynamic experience +similar to public cloud environments. + +The challenge arises in virtual environments, where a noisy neighbor can lead +to performance degradation for other instances sharing the same resources. +Although it's uncommon to observe noisy neighbor issues in Kubernetes +environments backed by Ceph storage, the possibility exists. The existing QoS +support with rbd-nbd doesn't apply to krbd, and as rbd-nbd isn't suitable for +container production workloads, a solution is needed for krbd. + +To mitigate resource starvation issues, setting QoS at the device level through +cgroup v2 when enabled becomes crucial. This approach guarantees that I/O +capacity isn't overcommitted and is fairly distributed among workloads. + +## Dependency + +* cgroup v2 must be enabled on the Node +* We might have Kubernetes dependency as well +* Container runtime dependency that supports cgroupv2 + +## Manual steps for implementing RBD QoS in a Kubernetes Cluster + +```bash +[$] ssh root@node1 +sh-4.4# chroot /host +sh-5.1# cat /proc/partitions +major minor #blocks name + + 259 0 125829120 nvme0n1 + 259 1 1024 nvme0n1p1 + 259 2 130048 nvme0n1p2 + 259 3 393216 nvme0n1p3 + 259 4 125303791 nvme0n1p4 + 259 6 52428800 nvme2n1 + 7 0 536870912 loop0 + 259 5 536870912 nvme1n1 + 252 0 52428800 rbd0 +sh-5.1# +``` + +Once the rbd device is mapped on the node we get the device's major and minor +number we need to set the io limit on the device but we need to find the right +cgroup file where we need to set the limit + +Kubernetes/Openshift creates a custom cgroup hierarchy for the pods it created +but start is `/sys/fs/cgroup` folder + +```bash +sh-5.1# cd /sys/fs/cgroup/ +sh-5.1# ls +cgroup.controllers cgroup.subtree_control cpuset.mems.effective io.stat memory.reclaim sys-kernel-debug.mount +cgroup.max.depth cgroup.threads dev-hugepages.mount kubepods.slice memory.stat sys-kernel-tracing.mount +cgroup.max.descendants cpu.pressure dev-mqueue.mount machine.slice misc.capacity system.slice +cgroup.procs cpu.stat init.scope memory.numa_stat sys-fs-fuse-connections.mount user.slice +cgroup.stat cpuset.cpus.effective io.pressure memory.pressure sys-kernel-config.mount +``` + +`kubepods.slice` is the starting point and it contains multiple slices + +```bash +sh-5.1# cd kubepods.slice +sh-5.1# ls +cgroup.controllers cpuset.cpus hugetlb.2MB.rsvd.max memory.pressure +cgroup.events cpuset.cpus.effective io.bfq.weight memory.reclaim +cgroup.freeze cpuset.cpus.partition io.latency memory.stat +cgroup.kill cpuset.mems io.max memory.swap.current +cgroup.max.depth cpuset.mems.effective io.pressure memory.swap.events +cgroup.max.descendants hugetlb.1GB.current io.stat memory.swap.high +cgroup.procs hugetlb.1GB.events kubepods-besteffort.slice memory.swap.max +cgroup.stat hugetlb.1GB.events.local kubepods-burstable.slice memory.zswap.current +cgroup.subtree_control hugetlb.1GB.max kubepods-pod2b38830b_c2d6_4528_8935_b1c08511b1e3.slice memory.zswap.max +cgroup.threads hugetlb.1GB.numa_stat memory.current misc.current +cgroup.type hugetlb.1GB.rsvd.current memory.events misc.max +cpu.idle hugetlb.1GB.rsvd.max memory.events.local pids.current +cpu.max hugetlb.2MB.current memory.high pids.events +cpu.max.burst hugetlb.2MB.events memory.low pids.max +cpu.pressure hugetlb.2MB.events.local memory.max rdma.current +cpu.stat hugetlb.2MB.max memory.min rdma.max +cpu.weight hugetlb.2MB.numa_stat memory.numa_stat +cpu.weight.nice hugetlb.2MB.rsvd.current memory.oom.group +``` + +Based on the QoS of the pod, either our application pod will end up in the +above `kubepods-besteffort.slice` or `kubepods-burstable.slice` or +`kubepods.slice` (Guaranteed QoS) cgroup. The 3 QoS classes are defined +[here](https://kubernetes.io/docs/concepts/workloads/pods/pod-QoS/#quality-of-service-classes) + +To identify the right cgroup file, we need pod UUID and container UUID from the +`pod yaml` output + +```bash +[$]kubectl get po csi-rbd-demo-pod -oyaml |grep uid + uid: cdf7b785-4eb7-44f7-99cc-ef53890f4dfd +[$]kubectl get po csi-rbd-demo-pod -oyaml |grep -i containerID + - containerID: cri-o://77e57fbbc0f0630f41f9f154f4b5fe368b6dcf7bef7dcd75a9c4b56676f10bc9 +[$]kubectl get po csi-rbd-demo-pod -oyaml |grep -i qosClass + qosClass: BestEffort +``` + +Now check in the `kubepods-besteffort.slice` and identify the right path using +pod UID and container UID + +Before that check `io.max` on the application pod and see if there is any limit + +```bash +[$]kubectl exec -it csi-rbd-demo-pod -- sh +sh-4.4# cat /sys/fs/cgroup/io.max +sh-4.4# +``` + +Come back to the Node and find the right cgroup scope + +```bash +sh-5.1# cd kubepods-besteffort.slice/kubepods-besteffort-podcdf7b785_4eb7_44f7_99cc_ef53890f4dfd.slice/crio-77e57fbbc0f0630f41f9f154f4b5fe368b6dcf7bef7dcd75a9c4b56676f10bc9.scope/ + + +sh-5.1# echo "252:0 wbps=1048576" > io.max +sh-5.1# cat io.max +252:0 rbps=max wbps=1048576 riops=max wiops=max +``` + +Now go back to the application pod and check if we have the right limit set + +```bash +[$]kubectl exec -it csi-rbd-demo-pod -- sh +sh-4.4# cat /sys/fs/cgroup/io.max +252:0 rbps=max wbps=1048576 riops=max wiops=max +sh-4.4# +``` + +Note:- We can only support the QoS that cgroup v2 io controller supports, this +means that cumulative read+write QoS limits won't be supported. + +Below are the configurations that will be supported + +| Parameter | Description | +| --- | --- | +| MaxReadIOPS | Max read IO operations per second | +| MaxWriteIOPS | Max write IO operations per second | +| MaxReadBytesPerSecond | Max read bytes per second | +| MaxWriteBytesPerSecond | Max write bytes per second | + +## Different approaches + +The above solution can be implemented using 3 different approaches. + +### 1. QoS using new parameters in RBD StorageClass + +```yaml +--- +apiVersion: storage.k8s.io/v1 +kind: StorageClass +metadata: + name: csi-rbd-sc +provisioner: rbd.csi.ceph.com +parameters: + MaxReadIOPS: "" + MaxWriteIOPS: "" + MaxReadBytesPerSecond: "" + MaxWriteBytesPerSecond: "" +``` + +#### Implementation for StorageClass QoS + +1. Create new storageClass with new parameters for QoS +1. Modify CSIDriver object to pass pod details to the NodePublishVolume CSI + procedure +1. During NodePublishVolume CSI procedure + * Retrieve the QoS configuration from the volumeContext in NodePublishRequest + * Identify the rbd device using the NodeStageVolumePath + * Get the pod UUID from the NodeStageVolume + * Set io.max file in all the containers in the pod + +#### Drawbacks of StorageClass QoS + +1. No way to update the QoS at runtime +1. Need to take a backup and restore to New QoS StorageClass +1. Delete and Recreate the PV object + +### 2. QoS using parameters in VolumeAttributeClass + +```yaml +apiVersion: storage.k8s.io/v1alpha1 +kind: VolumeAttributesClass +metadata: + name: silver +parameters: + MaxReadIOPS: "" + MaxWriteIOPS: "" + MaxReadBytesPerSecond: "" + MaxWriteBytesPerSecond: "" +``` + +VolumeAttributesClassName is a new parameter in the PVC object the user can +choose from and this can also be updated or removed later. + +This new VolumeAttributeClass is designed to keep storage that supports setting +QoS at the storage level which means setting some configuration at the storage +(like QoS for nbd) + +#### Implementation of VolumeAttributeClass QoS + +1. Modify CSIDriver object to pass pod details to the NodePublishVolume CSI + procedure +1. Add support in Ceph-CSI to expose ModifyVolume CSI procedure +1. Ceph-CSI will store QoS in the rbd image metadata +1. During NodeStage operation retrieve the image metadata and store it in + stagingPath +1. Whenever a new pod comes in apply the QoS + +#### Drawbacks of VolumeAttributeClass QoS + +One problem with above is all application need to be scaled downed and scaled +up to get the new QoS value even though its changed in the PVC object, this is +sometime impossible as it will have downtime. + +### 3. QoS using parameters in VolumeAttributeClass with NodePublish Secret + +1. Modify CSIDriver object to pass pod details to the NodePublishVolume CSI + procedure +1. Add support in Ceph-CSI to expose ModifyVolume CSI procedure +1. Ceph-CSI will store QoS in the rbd image metadata +1. During NodePublishVolume operation retrieve the QoS from image metadata +1. Whenever a new pod comes in apply the QoS + +This solution addresses the aforementioned issue, but it requires a secret to +communicate with the ceph cluster. Therefore, we must create a new +PublishSecret for the storageClass, which may be beneficial when Kubernetes +eventually enables Node operations. + +Both options 2 and 3 are contingent upon changes to the CSI spec and Kubernetes +support. Additionally, +[VolumeAttributeClass](https://github.com/kubernetes/enhancements/blob/master/keps/sig-storage/3751-volume-attributes-class/README.md) +is currently being developed within the Kubernetes realm and will initially be +in the Alpha stage. Consequently, it will be disabled by default. + +#### Advantages of QoS using VolumeAttributeClass + +1. No Restore/Clone operation is required to change the QoS +1. Easily QoS can be changed for existing PVC only with second approach not + with third as it needs new secret. + +### Hybrid Approach + +Considering the advantages and drawbacks, we can use StorageClass and +VolumeAttributeClass to support QoS, with VolumeAttributeClass taking +precedence over StorageClass. This approach offers a flexible solution that +accounts for dynamic changes while addressing the challenges of existing +approaches. + +### References + +Some of the useful links that helped me to understand cgroup v2 and how to set +QoS on the device. + +* [Kubernetes cgroup v2 + Architecture](https://kubernetes.io/docs/concepts/architecture/cgroups/) +* [cgroup v2 kernel doc](https://docs.kernel.org/admin-guide/cgroup-v2.html) +* [ceph RBD QoS tracker](https://tracker.ceph.com/issues/36191) +* [cgroup v2 io + controller](https://facebookmicrosites.github.io/cgroup2/docs/io-controller.html) +* [Kubernetes IOPS + issue](https://github.com/kubernetes/kubernetes/issues/92287)