Skip to content

Latest commit

 

History

History
464 lines (329 loc) · 20.8 KB

kubelet-eviction.md

File metadata and controls

464 lines (329 loc) · 20.8 KB
Raw

WARNING WARNING WARNING WARNING WARNING

PLEASE NOTE: This document applies to the HEAD of the source tree

If you are using a released version of Kubernetes, you should refer to the docs that go with that version.

The latest release of this document can be found [here](http://releases.k8s.io/release-1.3/docs/proposals/kubelet-eviction.md).

Documentation for other releases can be found at releases.k8s.io.

Kubelet - Eviction Policy

Authors: Derek Carr (@derekwaynecarr), Vishnu Kannan (@vishh)

Status: Proposed (memory evictions WIP)

This document presents a specification for how the kubelet evicts pods when compute resources are too low.

Goals

The node needs a mechanism to preserve stability when available compute resources are low.

This is especially important when dealing with incompressible compute resources such as memory or disk. If either resource is exhausted, the node would become unstable.

The kubelet has some support for influencing system behavior in response to a system OOM by having the system OOM killer see higher OOM score adjust scores for containers that have consumed the largest amount of memory relative to their request. System OOM events are very compute intensive, and can stall the node until the OOM killing process has completed. In addition, the system is prone to return to an unstable state since the containers that are killed due to OOM are either restarted or a new pod is scheduled on to the node.

Instead, we would prefer a system where the kubelet can pro-actively monitor for and prevent against total starvation of a compute resource, and in cases of where it could appear to occur, pro-actively fail one or more pods, so the workload can get moved and scheduled elsewhere when/if its backing controller creates a new pod.

Scope of proposal

This proposal defines a pod eviction policy for reclaiming compute resources.

As of now, memory and disk based evictions are supported. The proposal focuses on a simple default eviction strategy intended to cover the broadest class of user workloads.

Eviction Signals

The kubelet will support the ability to trigger eviction decisions on the following signals.

Eviction Signal Description
memory.available memory.available := node.status.capacity[memory] - node.stats.memory.workingSet
nodefs.available nodefs.available := node.stats.fs.available
imagefs.available imagefs.available := node.stats.runtime.imagefs.available

kubelet supports only two filesystem partitions.

  1. The nodefs filesystem that kubelet uses for volumes, daemon logs, etc.
  2. The imagefs filesystem that container runtimes uses for storing images and container writable layers.

imagefs is optional. kubelet auto-discovers these filesystems using cAdvisor. kubelet does not care about any other filesystems. Any other types of configurations are not currently supported by the kubelet. For example, it is not OK to store volumes and logs in a dedicated imagefs.

Eviction Thresholds

The kubelet will support the ability to specify eviction thresholds.

An eviction threshold is of the following form:

<eviction-signal><operator><quantity>

  • valid eviction-signal tokens as defined above.
  • valid operator tokens are <
  • valid quantity tokens must match the quantity representation used by Kubernetes

If threhold criteria are met, the kubelet will take pro-active action to attempt to reclaim the starved compute resource associated with the eviction signal.

The kubelet will support soft and hard eviction thresholds.

Soft Eviction Thresholds

A soft eviction threshold pairs an eviction threshold with a required administrator specified grace period. No action is taken by the kubelet to reclaim resources associated with the eviction signal until that grace period has been exceeded. If no grace period is provided, the kubelet will error on startup.

In addition, if a soft eviction threshold has been met, an operator can specify a maximum allowed pod termination grace period to use when evicting pods from the node. If specified, the kubelet will use the lesser value among the pod.Spec.TerminationGracePeriodSeconds and the max allowed grace period. If not specified, the kubelet will kill pods immediately with no graceful termination.

To configure soft eviction thresholds, the following flags will be supported:

--eviction-soft="": A set of eviction thresholds (e.g. memory.available<1.5Gi) that if met over a corresponding grace period would trigger a pod eviction.
--eviction-soft-grace-period="": A set of eviction grace periods (e.g. memory.available=1m30s) that correspond to how long a soft eviction threshold must hold before triggering a pod eviction.
--eviction-max-pod-grace-period="0": Maximum allowed grace period (in seconds) to use when terminating pods in response to a soft eviction threshold being met.

Hard Eviction Thresholds

A hard eviction threshold has no grace period, and if observed, the kubelet will take immediate action to reclaim the associated starved resource. If a hard eviction threshold is met, the kubelet will kill the pod immediately with no graceful termination.

To configure hard eviction thresholds, the following flag will be supported:

--eviction-hard="": A set of eviction thresholds (e.g. memory.available<1Gi) that if met would trigger a pod eviction.

Eviction Monitoring Interval

The kubelet will initially evaluate eviction thresholds at the same housekeeping interval as cAdvisor housekeeping.

In Kubernetes 1.2, this was defaulted to 10s.

It is a goal to shrink the monitoring interval to a much shorter window. This may require changes to cAdvisor to let alternate housekeeping intervals be specified for selected data (google/cadvisor#1247)

For the purposes of this proposal, we expect the monitoring interval to be no more than 10s to know when a threshold has been triggered, but we will strive to reduce that latency time permitting.

Node Conditions

The kubelet will support a node condition that corresponds to each eviction signal.

If a hard eviction threshold has been met, or a soft eviction threshold has been met independent of its associated grace period, the kubelet will report a condition that reflects the node is under pressure.

The following node conditions are defined that correspond to the specified eviction signal.

Node Condition Eviction Signal Description
MemoryPressure memory.available Available memory on the node has satisfied an eviction threshold
DiskPressure nodefs.available (or) imagefs.available Available disk space on either the node's root filesytem or image filesystem has satisfied an eviction threshold

The kubelet will continue to report node status updates at the frequency specified by --node-status-update-frequency which defaults to 10s.

Oscillation of node conditions

If a node is oscillating above and below a soft eviction threshold, but not exceeding its associated grace period, it would cause the corresponding node condition to constantly oscillate between true and false, and could cause poor scheduling decisions as a consequence.

To protect against this oscillation, the following flag is defined to control how long the kubelet must wait before transitioning out of a pressure condition.

--eviction-pressure-transition-period=5m0s: Duration for which the kubelet has to wait
before transitioning out of an eviction pressure condition.

The kubelet would ensure that it has not observed an eviction threshold being met for the specified pressure condition for the period specified before toggling the condition back to false.

Eviction scenarios

Memory

Let's assume the operator started the kubelet with the following:

--eviction-hard="memory.available<100Mi"
--eviction-soft="memory.available<300Mi"
--eviction-soft-grace-period="memory.available=30s"

The kubelet will run a sync loop that looks at the available memory on the node as reported from cAdvisor by calculating (capacity - workingSet). If available memory is observed to drop below 100Mi, the kubelet will immediately initiate eviction. If available memory is observed as falling below 300Mi, it will record when that signal was observed internally in a cache. If at the next sync, that criteria was no longer satisfied, the cache is cleared for that signal. If that signal is observed as being satisfied for longer than the specified period, the kubelet will initiate eviction to attempt to reclaim the resource that has met its eviction threshold.

Disk

Let's assume the operator started the kubelet with the following:

--eviction-hard="nodefs.available<1Gi,imagefs.available<10Gi"
--eviction-soft="nodefs.available<1.5Gi,imagefs.available<20Gi"
--eviction-soft-grace-period="nodefs.available=1m,imagefs.available=2m"

The kubelet will run a sync loop that looks at the available disk on the node's supported partitions as reported from cAdvisor. If available disk space on the node's primary filesystem is observed to drop below 1Gi, the kubelet will immediately initiate eviction. If available disk space on the node's image filesystem is observed to drop below 10Gi, the kubelet will immediately initiate eviction.

If available disk space on the node's primary filesystem is observed as falling below 1.5Gi, or if available disk space on the node's image filesystem is observed as falling below 20Gi, it will record when that signal was observed internally in a cache. If at the next sync, that criterion was no longer satisfied, the cache is cleared for that signal. If that signal is observed as being satisfied for longer than the specified period, the kubelet will initiate eviction to attempt to reclaim the resource that has met its eviction threshold.

Eviction of Pods

If an eviction threshold has been met, the kubelet will initiate the process of evicting pods until it has observed the signal has gone below its defined threshold.

The eviction sequence works as follows:

  • for each monitoring interval, if eviction thresholds have been met
  • find candidate pod
  • fail the pod
  • block until pod is terminated on node

If a pod is not terminated because a container does not happen to die (i.e. processes stuck in disk IO for example), the kubelet may select an additional pod to fail instead. The kubelet will invoke the KillPod operation exposed on the runtime interface. If an error is returned, the kubelet will select a subsequent pod.

Eviction Strategy

The kubelet will implement a default eviction strategy oriented around the pod quality of service class.

It will target pods that are the largest consumers of the starved compute resource relative to their scheduling request. It ranks pods within a quality of service tier in the following order.

  • BestEffort pods that consume the most of the starved resource are failed first.
  • Burstable pods that consume the greatest amount of the starved resource relative to their request for that resource are killed first. If no pod has exceeded its request, the strategy targets the largest consumer of the starved resource.
  • Guaranteed pods that consume the greatest amount of the starved resource relative to their request are killed first. If no pod has exceeded its request, the strategy targets the largest consumer of the starved resource.

A guaranteed pod is guaranteed to never be evicted because of another pod's resource consumption. That said, guarantees are only as good as the underlying foundation they are built upon. If a system daemon (i.e. kubelet, docker, journald, etc.) is consuming more resources than were reserved via system-reserved or kube-reserved allocations, and the node only has guaranteed pod(s) remaining, then the node must choose to evict a guaranteed pod in order to preserve node stability, and to limit the impact of the unexpected consumption to other guaranteed pod(s).

Disk based evictions

With Imagefs

If nodefs filesystem has met eviction thresholds, kubelet will free up disk space in the following order:

  1. Delete logs
  2. Evict Pods if required.

If imagefs filesystem has met eviction thresholds, kubelet will free up disk space in the following order:

  1. Delete unused images
  2. Evict Pods if required.

Without Imagefs

If nodefs filesystem has met eviction thresholds, kubelet will free up disk space in the following order:

  1. Delete logs
  2. Delete unused images
  3. Evict Pods if required.

Let's explore the different options for freeing up disk space.

Delete logs of dead pods/containers

As of today, logs are tied to a container's lifetime. kubelet keeps dead containers around, to provide access to logs. In the future, if we store logs of dead containers outside of the container itself, then kubelet can delete these logs to free up disk space. Once the lifetime of containers and logs are split, kubelet can support more user friendly policies around log evictions. kubelet can delete logs of the oldest containers first. Since logs from the first and the most recent incarnation of a container is the most important for most applications, kubelet can try to preserve these logs and aggresively delete logs from other container incarnations.

Until logs are split from container's lifetime, kubelet can delete dead containers to free up disk space.

Delete unused images

kubelet performs image garbage collection based on thresholds today. It uses a high and a low watermark. Whenever disk usage exceeds the high watermark, it removes images until the low watermark is reached. kubelet employs a LRU policy when it comes to deleting images.

The existing policy will be replaced with a much simpler policy. Images will be deleted based on eviction thresholds. If kubelet can delete logs and keep disk space availability above eviction thresholds, then kubelet will not delete any images. If kubelet decides to delete unused images, it will delete all unused images.

Evict pods

There is no ability to specify disk limits for pods/containers today. Disk is a best effort resource. When necessary, kubelet can evict pods one at a time. kubelet will follow the Eviction Strategy mentioned above for making eviction decisions. kubelet will evict the pod that will free up the maximum amount of disk space on the filesystem that has hit eviction thresholds. Within each QoS bucket, kubelet will sort pods according to their disk usage. kubelet will sort pods in each bucket as follows:

Without Imagefs

If nodefs is triggering evictions, kubelet will sort pods based on their total disk usage

  • local volumes + logs & writable layer of all its containers.

With Imagefs

If nodefs is triggering evictions, kubelet will sort pods based on the usage on nodefs

  • local volumes + logs of all its containers.

If imagefs is triggering evictions, kubelet will sort pods based on the writable layer usage of all its containers.

Minimum eviction thresholds

In certain scenarios, eviction of pods could result in reclamation of small amount of resources. This can result in kubelet hitting eviction thresholds in repeated successions. In addition to that, eviction of resources like disk, is time consuming.

To mitigate these issues, kubelet will have a per-resource minimum-threshold. Whenever kubelet observes resource pressure, kubelet will attempt to reclaim at least minimum-threshold amount of resource.

Following are the flags through which minimum-thresholds can be configured for each evictable resource:

--minimum-eviction-thresholds="memory.available=0Mi,nodefs.available=500Mi,imagefs.available=2Gi"

The default minimum-eviction-threshold is 0 for all resources.

Deprecation of existing features

kubelet has been freeing up disk space on demand to keep the node stable. As part of this proposal, some of the existing features/flags around disk space retrieval will be deprecated in-favor of this proposal.

Existing Flag New Flag Rationale
--image-gc-high-threshold --eviction-hard or eviction-soft existing eviction signals can capture image garbage collection
--image-gc-low-threshold --minimum-eviction-thresholds eviction thresholds achieve the same behavior
--maximum-dead-containers deprecated once old logs are stored outside of container's context
--maximum-dead-containers-per-container deprecated once old logs are stored outside of container's context
--minimum-container-ttl-duration deprecated once old logs are stored outside of container's context
--low-diskspace-threshold-mb --eviction-hard or eviction-soft this use case is better handled by this proposal
--outofdisk-transition-frequency --eviction-pressure-transition-period make the flag generic to suit all compute resources

Kubelet Admission Control

Feasibility checks during kubelet admission

Memory

The kubelet will reject BestEffort pods if any of the memory eviction thresholds have been exceeded independent of the configured grace period.

Let's assume the operator started the kubelet with the following:

--eviction-soft="memory.available<256Mi"
--eviction-soft-grace-period="memory.available=30s"

If the kubelet sees that it has less than 256Mi of memory available on the node, but the kubelet has not yet initiated eviction since the grace period criteria has not yet been met, the kubelet will still immediately fail any incoming best effort pods.

The reasoning for this decision is the expectation that the incoming pod is likely to further starve the particular compute resource and the kubelet should return to a steady state before accepting new workloads.

Disk

The kubelet will reject all pods if any of the disk eviction thresholds have been met.

Let's assume the operator started the kubelet with the following:

--eviction-soft="disk.available<1500Mi"
--eviction-soft-grace-period="disk.available=30s"

If the kubelet sees that it has less than 1500Mi of disk available on the node, but the kubelet has not yet initiated eviction since the grace period criteria has not yet been met, the kubelet will still immediately fail any incoming pods.

The rationale for failing all pods instead of just best effort is because disk is currently a best effort resource for all QoS classes.

Kubelet will apply the same policy even if there is a dedicated image filesystem.

Scheduler

The node will report a condition when a compute resource is under pressure. The scheduler should view that condition as a signal to dissuade placing additional best effort pods on the node.

In this case, the MemoryPressure condition if true should dissuade the scheduler from placing new best effort pods on the node since they will be rejected by the kubelet in admission.

On the other hand, the DiskPressure condition if true should dissuade the scheduler from placing any new pods on the node since they will be rejected by the kubelet in admission.

Best Practices

DaemonSet

It is never desired for a kubelet to evict a pod that was derived from a DaemonSet since the pod will immediately be recreated and rescheduled back to the same node.

At the moment, the kubelet has no ability to distinguish a pod created from DaemonSet versus any other object. If/when that information is available, the kubelet could pro-actively filter those pods from the candidate set of pods provided to the eviction strategy.

In general, it should be strongly recommended that DaemonSet not create BestEffort pods to avoid being identified as a candidate pod for eviction. Instead DaemonSet should ideally include Guaranteed pods only.

Analytics