From 542134c0375b5ca2b1d18490c02b8a20bfdd8d74 Mon Sep 17 00:00:00 2001 From: Eudean Sun Date: Tue, 21 Nov 2017 10:43:24 -0800 Subject: [PATCH 01/80] HID: cp2112: Fix I2C_BLOCK_DATA transactions The existing driver erroneously treats I2C_BLOCK_DATA and BLOCK_DATA commands the same. For I2C_BLOCK_DATA reads, the length of the read is provided in data->block[0], but the length itself should not be sent to the slave. In contrast, for BLOCK_DATA reads no length is specified since the length will be the first byte returned from the slave. When copying data back to the data buffer, for an I2C_BLOCK_DATA read we have to take care not to overwrite data->block[0] to avoid overwriting the length. A BLOCK_DATA read doesn't have this concern since the first byte returned by the device is the length and belongs in data->block[0]. For I2C_BLOCK_DATA writes, the length is also provided in data->block[0], but the length itself is not sent to the slave (in contrast to BLOCK_DATA writes where the length prefixes the data sent to the slave). This was tested on physical hardware using i2cdump with the i and s flags to test the behavior of I2C_BLOCK_DATA reads and BLOCK_DATA reads, respectively. Writes were not tested but the I2C_BLOCK_DATA write change is pretty simple to verify by inspection. Signed-off-by: Eudean Sun Signed-off-by: Jiri Kosina --- drivers/hid/hid-cp2112.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c index 68cdc962265b10..271f31461da427 100644 --- a/drivers/hid/hid-cp2112.c +++ b/drivers/hid/hid-cp2112.c @@ -696,8 +696,16 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr, (u8 *)&word, 2); break; case I2C_SMBUS_I2C_BLOCK_DATA: - size = I2C_SMBUS_BLOCK_DATA; - /* fallthrough */ + if (read_write == I2C_SMBUS_READ) { + read_length = data->block[0]; + count = cp2112_write_read_req(buf, addr, read_length, + command, NULL, 0); + } else { + count = cp2112_write_req(buf, addr, command, + data->block + 1, + data->block[0]); + } + break; case I2C_SMBUS_BLOCK_DATA: if (I2C_SMBUS_READ == read_write) { count = cp2112_write_read_req(buf, addr, @@ -785,6 +793,9 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr, case I2C_SMBUS_WORD_DATA: data->word = le16_to_cpup((__le16 *)buf); break; + case I2C_SMBUS_I2C_BLOCK_DATA: + memcpy(data->block + 1, buf, read_length); + break; case I2C_SMBUS_BLOCK_DATA: if (read_length > I2C_SMBUS_BLOCK_MAX) { ret = -EPROTO; From 56075f6072e7fdac302cff4e1b4c93b64ced99ab Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Sun, 26 Nov 2017 15:34:04 +1100 Subject: [PATCH 02/80] HID: holtekff: move MODULE_* parameters out of #ifdef block If you compile with: CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF is not set You get the following warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/hid/hid-holtekff.o see include/linux/module.h for more information Fix this by moving the module info out of the #ifdef CONFIG_HOLTEK_FF block and into the un-guarded part of the file. Signed-off-by: Daniel Axtens Acked-by: Anssi Hannula Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-holtekff.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c index 9325545fc3ae1c..edc0f64bb58480 100644 --- a/drivers/hid/hid-holtekff.c +++ b/drivers/hid/hid-holtekff.c @@ -32,10 +32,6 @@ #ifdef CONFIG_HOLTEK_FF -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Anssi Hannula "); -MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices"); - /* * These commands and parameters are currently known: * @@ -223,3 +219,7 @@ static struct hid_driver holtek_driver = { .probe = holtek_probe, }; module_hid_driver(holtek_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Anssi Hannula "); +MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices"); From 7cb4774e2d3282d29edd00762167876a27cc7d2a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 6 Dec 2017 17:54:38 +0100 Subject: [PATCH 03/80] HID: core: lower log level for unknown main item tags to warnings Given all the effort distros have done with splash-screens to give users a nice clean boot experience, we really want dmesg --level=err to not print anything unless there is a real problem with either the hardware or the kernel. Buggy HID descriptors unfortunately happen all too often, so lower the log level to warning keep the console clear of error messages such as: [ 441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0 Signed-off-by: Hans de Goede Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index f3fcb836a1f9ed..0c3f608131cff4 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -551,7 +551,7 @@ static int hid_parser_main(struct hid_parser *parser, struct hid_item *item) ret = hid_add_field(parser, HID_FEATURE_REPORT, data); break; default: - hid_err(parser->device, "unknown main item tag 0x%x\n", item->tag); + hid_warn(parser->device, "unknown main item tag 0x%x\n", item->tag); ret = 0; } From 964728f9f407eca0b417fdf8e784b7a76979490c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 13 Nov 2017 11:12:58 +0100 Subject: [PATCH 04/80] USB: chipidea: msm: fix ulpi-node lookup Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately, but that fix was apparently never backported to stable. Fixes: 47654a162081 ("usb: chipidea: msm: Restore wrapper settings after reset") Fixes: b74c43156c0c ("usb: chipidea: msm: ci_hdrc_msm_probe() missing of_node_get()") Cc: stable # 4.10: b74c43156c0c Cc: Stephen Boyd Cc: Frank Rowand Signed-off-by: Johan Hovold Signed-off-by: Peter Chen --- drivers/usb/chipidea/ci_hdrc_msm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index 3593ce0ec641d8..880009987460af 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -247,7 +247,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) if (ret) goto err_mux; - ulpi_node = of_find_node_by_name(of_node_get(pdev->dev.of_node), "ulpi"); + ulpi_node = of_get_child_by_name(pdev->dev.of_node, "ulpi"); if (ulpi_node) { phy_node = of_get_next_available_child(ulpi_node, NULL); ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy"); From 08933099e6404f588f81c2050bfec7313e06eeaf Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Thu, 14 Dec 2017 16:54:45 +0100 Subject: [PATCH 05/80] USB: serial: option: add support for Telit ME910 PID 0x1101 This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3b3513874cfd1e..b02fb576b85699 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -280,6 +280,7 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 #define TELIT_PRODUCT_ME910 0x1100 +#define TELIT_PRODUCT_ME910_DUAL_MODEM 0x1101 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 @@ -645,6 +646,11 @@ static const struct option_blacklist_info telit_me910_blacklist = { .reserved = BIT(1) | BIT(3), }; +static const struct option_blacklist_info telit_me910_dual_modem_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(3), +}; + static const struct option_blacklist_info telit_le910_blacklist = { .sendsetup = BIT(0), .reserved = BIT(1) | BIT(2), @@ -1244,6 +1250,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = (kernel_ulong_t)&telit_me910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), + .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), From 92a18a657fb2e2ffbfa0659af32cc18fd2346516 Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Fri, 15 Dec 2017 00:39:27 +0100 Subject: [PATCH 06/80] USB: serial: qcserial: add Sierra Wireless EM7565 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by: Reinhard Speyerer Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e3892541a48994..613f91add03da1 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */ {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ + {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ + {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ @@ -342,6 +344,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) break; case 2: dev_dbg(dev, "NMEA GPS interface found\n"); + sendsetup = true; break; case 3: dev_dbg(dev, "Modem port found\n"); From 046046737bd35bed047460f080ea47e186be731e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 15 Nov 2017 10:43:16 +0100 Subject: [PATCH 07/80] phy: tegra: fix device-tree node lookups Fix child-node lookups during probe, which ended up searching the whole device tree depth-first starting at the parents rather than just matching on their children. To make things worse, some parent nodes could end up being being prematurely freed (by tegra_xusb_pad_register()) as of_find_node_by_name() drops a reference to its first argument. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Cc: stable # 4.7 Cc: Thierry Reding Signed-off-by: Johan Hovold Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/tegra/xusb.c | 58 ++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 4307bf0013e186..63e916d4d06961 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -75,14 +75,14 @@ MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match); static struct device_node * tegra_xusb_find_pad_node(struct tegra_xusb_padctl *padctl, const char *name) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(padctl->dev->of_node); + struct device_node *pads, *np; + + pads = of_get_child_by_name(padctl->dev->of_node, "pads"); + if (!pads) + return NULL; - np = of_find_node_by_name(np, "pads"); - if (np) - np = of_find_node_by_name(np, name); + np = of_get_child_by_name(pads, name); + of_node_put(pads); return np; } @@ -90,16 +90,16 @@ tegra_xusb_find_pad_node(struct tegra_xusb_padctl *padctl, const char *name) static struct device_node * tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(pad->dev.of_node); + struct device_node *np, *lanes; - np = of_find_node_by_name(np, "lanes"); - if (!np) + lanes = of_get_child_by_name(pad->dev.of_node, "lanes"); + if (!lanes) return NULL; - return of_find_node_by_name(np, pad->soc->lanes[index].name); + np = of_get_child_by_name(lanes, pad->soc->lanes[index].name); + of_node_put(lanes); + + return np; } static int @@ -195,7 +195,7 @@ int tegra_xusb_pad_register(struct tegra_xusb_pad *pad, unsigned int i; int err; - children = of_find_node_by_name(pad->dev.of_node, "lanes"); + children = of_get_child_by_name(pad->dev.of_node, "lanes"); if (!children) return -ENODEV; @@ -444,21 +444,21 @@ static struct device_node * tegra_xusb_find_port_node(struct tegra_xusb_padctl *padctl, const char *type, unsigned int index) { - /* - * of_find_node_by_name() drops a reference, so make sure to grab one. - */ - struct device_node *np = of_node_get(padctl->dev->of_node); + struct device_node *ports, *np; + char *name; - np = of_find_node_by_name(np, "ports"); - if (np) { - char *name; + ports = of_get_child_by_name(padctl->dev->of_node, "ports"); + if (!ports) + return NULL; - name = kasprintf(GFP_KERNEL, "%s-%u", type, index); - if (!name) - return ERR_PTR(-ENOMEM); - np = of_find_node_by_name(np, name); - kfree(name); + name = kasprintf(GFP_KERNEL, "%s-%u", type, index); + if (!name) { + of_node_put(ports); + return ERR_PTR(-ENOMEM); } + np = of_get_child_by_name(ports, name); + kfree(name); + of_node_put(ports); return np; } @@ -847,7 +847,7 @@ static void tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl) static int tegra_xusb_padctl_probe(struct platform_device *pdev) { - struct device_node *np = of_node_get(pdev->dev.of_node); + struct device_node *np = pdev->dev.of_node; const struct tegra_xusb_padctl_soc *soc; struct tegra_xusb_padctl *padctl; const struct of_device_id *match; @@ -855,7 +855,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) int err; /* for backwards compatibility with old device trees */ - np = of_find_node_by_name(np, "pads"); + np = of_get_child_by_name(np, "pads"); if (!np) { dev_warn(&pdev->dev, "deprecated DT, using legacy driver\n"); return tegra_xusb_padctl_legacy_probe(pdev); From e796cc6a3a9186c92092e2f5929cf8f65b56cf01 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Fri, 17 Nov 2017 16:55:35 +0530 Subject: [PATCH 08/80] phy: cpcap-usb: Fix platform_get_irq_byname's error checking. The platform_get_irq_byname() function returns negative if an error occurs. zero or positive number on success. platform_get_irq_byname() error checking for zero is not correct. Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Arvind Yadav Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/motorola/phy-cpcap-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c index accaaaccb662fd..6601ad0dfb3ad2 100644 --- a/drivers/phy/motorola/phy-cpcap-usb.c +++ b/drivers/phy/motorola/phy-cpcap-usb.c @@ -310,7 +310,7 @@ static int cpcap_usb_init_irq(struct platform_device *pdev, int irq, error; irq = platform_get_irq_byname(pdev, name); - if (!irq) + if (irq < 0) return -ENODEV; error = devm_request_threaded_irq(ddata->dev, irq, NULL, From 3cb0ab6e008f2a9ffe2d1be4246984003caed7e2 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Thu, 8 Sep 2016 10:38:11 -0700 Subject: [PATCH 09/80] phy: rockchip-typec: add pm_runtime_disable in err case Add pm_runtime_disable in err case to make the pm_runtime_enable/disable is invoked balanced. Signed-off-by: Chris Zhong Reviewed-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/rockchip/phy-rockchip-typec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index ee85fa0ca4b05b..7492c8978217f4 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -1137,6 +1137,7 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) if (IS_ERR(phy)) { dev_err(dev, "failed to create phy: %s\n", child_np->name); + pm_runtime_disable(dev); return PTR_ERR(phy); } @@ -1146,6 +1147,7 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { dev_err(dev, "Failed to register phy provider\n"); + pm_runtime_disable(dev); return PTR_ERR(phy_provider); } From 2b88212c4cc67ff33dec5bb4d690044b97a5f979 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 Nov 2017 12:56:36 +0100 Subject: [PATCH 10/80] phy: rcar-gen3-usb2: select USB_COMMON When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/renesas/phy-rcar-gen3-usb2.o: In function `rcar_gen3_phy_usb2_probe': phy-rcar-gen3-usb2.c:(.text+0x250): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 7e0540f41332 ("phy: rcar-gen3-usb2: check dr_mode for otg mode") Signed-off-by: Arnd Bergmann Acked-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/renesas/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig index cb09245e9b4c73..c845facacb063e 100644 --- a/drivers/phy/renesas/Kconfig +++ b/drivers/phy/renesas/Kconfig @@ -12,7 +12,9 @@ config PHY_RCAR_GEN3_USB2 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" depends on ARCH_RENESAS depends on EXTCON + depends on USB_SUPPORT select GENERIC_PHY + select USB_COMMON help Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. From c739f930be1dd5fd949030e3475a884fe06dae9b Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 12 Dec 2017 07:56:36 -0800 Subject: [PATCH 11/80] x86/espfix/64: Fix espfix double-fault handling on 5-level systems Using PGDIR_SHIFT to identify espfix64 addresses on 5-level systems was wrong, and it resulted in panics due to unhandled double faults. Use P4D_SHIFT instead, which is correct on 4-level and 5-level machines. This fixes a panic when running x86 selftests on 5-level machines. Signed-off-by: Andy Lutomirski Acked-by: Kirill A. Shutemov Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: David Laight Cc: Kees Cook Cc: Kirill A. Shutemov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Fixes: 1d33b219563f ("x86/espfix: Add support for 5-level paging") Link: http://lkml.kernel.org/r/24c898b4f44fdf8c22d93703850fb384ef87cfdc.1513035461.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index b7b0f74a215024..c751518936ac80 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -355,7 +355,7 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code) * * No need for ist_enter here because we don't use RCU. */ - if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY && + if (((long)regs->sp >> P4D_SHIFT) == ESPFIX_PGD_ENTRY && regs->cs == __KERNEL_CS && regs->ip == (unsigned long)native_irq_return_iret) { From f57ab9a01a36ef3454333251cc57e3a9948b17bf Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 17 Nov 2017 11:56:41 +0000 Subject: [PATCH 12/80] drivers: base: cacheinfo: fix cache type for non-architected system cache Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") doesn't initialise the cache type if it's present only in DT and the architecture is not aware of it. They are unified system level cache which are generally transparent. This patch check if the cache type is set to NOCACHE but the DT node indicates that it's unified cache and sets the cache type accordingly. Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") Reported-and-tested-by: Tan Xiaojun Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/cacheinfo.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/base/cacheinfo.c b/drivers/base/cacheinfo.c index eb3af2739537a8..07532d83be0bca 100644 --- a/drivers/base/cacheinfo.c +++ b/drivers/base/cacheinfo.c @@ -186,6 +186,11 @@ static void cache_associativity(struct cacheinfo *this_leaf) this_leaf->ways_of_associativity = (size / nr_sets) / line_size; } +static bool cache_node_is_unified(struct cacheinfo *this_leaf) +{ + return of_property_read_bool(this_leaf->of_node, "cache-unified"); +} + static void cache_of_override_properties(unsigned int cpu) { int index; @@ -194,6 +199,14 @@ static void cache_of_override_properties(unsigned int cpu) for (index = 0; index < cache_leaves(cpu); index++) { this_leaf = this_cpu_ci->info_list + index; + /* + * init_cache_level must setup the cache level correctly + * overriding the architecturally specified levels, so + * if type is NONE at this stage, it should be unified + */ + if (this_leaf->type == CACHE_TYPE_NOCACHE && + cache_node_is_unified(this_leaf)) + this_leaf->type = CACHE_TYPE_UNIFIED; cache_size(this_leaf); cache_get_line_size(this_leaf); cache_nr_sets(this_leaf); From 5f0e3fe6b1504d4e6530294ec87c473aa6d2d02f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 14 Nov 2017 09:10:11 -0500 Subject: [PATCH 13/80] x86/build: Make isoimage work on Debian Debian does not ship a 'mkisofs' symlink to genisoimage. All modern distros ship genisoimage, so just use that directly. That requires renaming the 'genisoimage' function. Also neaten up the 'for' loop while I'm in here. Signed-off-by: Matthew Wilcox Cc: Changbin Du Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/boot/genimage.sh | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/x86/boot/genimage.sh b/arch/x86/boot/genimage.sh index c9e8499fbfe75c..6a10d52a41452d 100644 --- a/arch/x86/boot/genimage.sh +++ b/arch/x86/boot/genimage.sh @@ -80,39 +80,43 @@ genfdimage288() { mcopy $FBZIMAGE w:linux } -genisoimage() { +geniso() { tmp_dir=`dirname $FIMAGE`/isoimage rm -rf $tmp_dir mkdir $tmp_dir - for i in lib lib64 share end ; do + for i in lib lib64 share ; do for j in syslinux ISOLINUX ; do if [ -f /usr/$i/$j/isolinux.bin ] ; then isolinux=/usr/$i/$j/isolinux.bin - cp $isolinux $tmp_dir fi done for j in syslinux syslinux/modules/bios ; do if [ -f /usr/$i/$j/ldlinux.c32 ]; then ldlinux=/usr/$i/$j/ldlinux.c32 - cp $ldlinux $tmp_dir fi done if [ -n "$isolinux" -a -n "$ldlinux" ] ; then break fi - if [ $i = end -a -z "$isolinux" ] ; then - echo 'Need an isolinux.bin file, please install syslinux/isolinux.' - exit 1 - fi done + if [ -z "$isolinux" ] ; then + echo 'Need an isolinux.bin file, please install syslinux/isolinux.' + exit 1 + fi + if [ -z "$ldlinux" ] ; then + echo 'Need an ldlinux.c32 file, please install syslinux/isolinux.' + exit 1 + fi + cp $isolinux $tmp_dir + cp $ldlinux $tmp_dir cp $FBZIMAGE $tmp_dir/linux echo "$KCMDLINE" > $tmp_dir/isolinux.cfg if [ -f "$FDINITRD" ] ; then cp "$FDINITRD" $tmp_dir/initrd.img fi - mkisofs -J -r -input-charset=utf-8 -quiet -o $FIMAGE -b isolinux.bin \ - -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table \ - $tmp_dir + genisoimage -J -r -input-charset=utf-8 -quiet -o $FIMAGE \ + -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 \ + -boot-info-table $tmp_dir isohybrid $FIMAGE 2>/dev/null || true rm -rf $tmp_dir } @@ -121,6 +125,6 @@ case $1 in bzdisk) genbzdisk;; fdimage144) genfdimage144;; fdimage288) genfdimage288;; - isoimage) genisoimage;; + isoimage) geniso;; *) echo 'Unknown image format'; exit 1; esac From cce1fea50e3be6b78fc677e8cf20cd0ca4c851b0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 1 Dec 2017 15:08:03 +0300 Subject: [PATCH 14/80] thunderbolt: Make pathname to force_power shorter WMI is the bus inside kernel, so, we may access the GUID via /sys/bus/wmi instead of doing this through /sys/devices path. Signed-off-by: Andy Shevchenko Acked-by: Mario Limonciello Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- Documentation/admin-guide/thunderbolt.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index de50a856177424..9b55952039a692 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with a sysfs attribute called "force_power". For example the intel-wmi-thunderbolt driver exposes this attribute in: - /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power + /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power To force the power to on, write 1 to this attribute file. To disable force power, write 0 to this attribute file. From 78dfa29c84bab548910490cf7508c53ad99d1d9e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 1 Dec 2017 15:08:04 +0300 Subject: [PATCH 15/80] MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry Make sure Thunderbolt maintainers get to see patches that touch documentation of the Thunderbolt driver as well. Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 82ad0eabce4f3e..5da966e19e8a95 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13492,6 +13492,7 @@ M: Mika Westerberg M: Yehezkel Bernat T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git S: Maintained +F: Documentation/admin-guide/thunderbolt.rst F: drivers/thunderbolt/ F: include/linux/thunderbolt.h From 74657181e7c449351d1ad28cf43941bc333e1bd6 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 1 Dec 2017 15:08:05 +0300 Subject: [PATCH 16/80] thunderbolt: Mask ring interrupt properly when polling starts When ring enters polling mode we are expected to mask the ring interrupt before the callback is called. However, the current code actually unmasks it probably because of a copy-paste mistake. Mask the interrupt properly from now on. Fixes: 4ffe722eefcb ("thunderbolt: Add polling mode for rings") Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat Signed-off-by: Greg Kroah-Hartman --- drivers/thunderbolt/nhi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index 419a7a90bce0e2..f45bcbc63738ff 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -339,7 +339,7 @@ static void __ring_interrupt(struct tb_ring *ring) return; if (ring->start_poll) { - __ring_interrupt_mask(ring, false); + __ring_interrupt_mask(ring, true); ring->start_poll(ring->poll_data); } else { schedule_work(&ring->work); From 9d5f38ba6c82359b7cec31fb27fb78ecc02f3946 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Fri, 15 Dec 2017 10:20:12 -0600 Subject: [PATCH 17/80] x86/mm: Unbreak modules that use the DMA API Commit d8aa7eea78a1 ("x86/mm: Add Secure Encrypted Virtualization (SEV) support") changed sme_active() from an inline function that referenced sme_me_mask to a non-inlined function in order to make the sev_enabled variable a static variable. This function was marked EXPORT_SYMBOL_GPL because at the time the patch was submitted, sme_me_mask was marked EXPORT_SYMBOL_GPL. Commit 87df26175e67 ("x86/mm: Unbreak modules that rely on external PAGE_KERNEL availability") changed sme_me_mask variable from EXPORT_SYMBOL_GPL to EXPORT_SYMBOL, allowing external modules the ability to build with CONFIG_AMD_MEM_ENCRYPT=y. Now, however, with sev_active() no longer an inline function and marked as EXPORT_SYMBOL_GPL, external modules that use the DMA API are once again broken in 4.15. Since the DMA API is meant to be used by external modules, this needs to be changed. Change the sme_active() and sev_active() functions from EXPORT_SYMBOL_GPL to EXPORT_SYMBOL. Signed-off-by: Tom Lendacky Signed-off-by: Thomas Gleixner Cc: Borislav Petkov Cc: Brijesh Singh Link: https://lkml.kernel.org/r/20171215162011.14125.7113.stgit@tlendack-t1.amdoffice.net --- arch/x86/mm/mem_encrypt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c index d9a9e9fc75dd7b..391b13402e4030 100644 --- a/arch/x86/mm/mem_encrypt.c +++ b/arch/x86/mm/mem_encrypt.c @@ -405,13 +405,13 @@ bool sme_active(void) { return sme_me_mask && !sev_enabled; } -EXPORT_SYMBOL_GPL(sme_active); +EXPORT_SYMBOL(sme_active); bool sev_active(void) { return sme_me_mask && sev_enabled; } -EXPORT_SYMBOL_GPL(sev_active); +EXPORT_SYMBOL(sev_active); static const struct dma_map_ops sev_dma_ops = { .alloc = sev_alloc, From bf29cb238dc0656e6564b6a94bb82e11d2129437 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 14 Dec 2017 19:18:25 +0100 Subject: [PATCH 18/80] sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION CONFIG_NO_HZ_FULL doesn't make sense without CONFIG_CPU_ISOLATION. In fact enabling the first without the second is a regression as nohz_full= boot parameter gets silently ignored. Besides this unnatural combination hangs RCU gp kthread when running rcutorture for reasons that are not yet fully understood: rcu_preempt kthread starved for 9974 jiffies! g4294967208 +c4294967207 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0 rcu_preempt I 7464 8 2 0x80000000 Call Trace: __schedule+0x493/0x620 schedule+0x24/0x40 schedule_timeout+0x330/0x3b0 ? preempt_count_sub+0xea/0x140 ? collect_expired_timers+0xb0/0xb0 rcu_gp_kthread+0x6bf/0xef0 This commit therefore makes NO_HZ_FULL select CPU_ISOLATION, which prevents all these bad behaviours. Reported-by: kernel test robot Signed-off-by: Paul E. McKenney Signed-off-by: Frederic Weisbecker Cc: Chris Metcalf Cc: Christoph Lameter Cc: John Stultz Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Wanpeng Li Fixes: 5c4991e24c69 ("sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL") Link: http://lkml.kernel.org/r/1513275507-29200-2-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar --- kernel/time/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index e776fc8cc1df3b..f6b5f19223d6cb 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -95,6 +95,7 @@ config NO_HZ_FULL select RCU_NOCB_CPU select VIRT_CPU_ACCOUNTING_GEN select IRQ_WORK + select CPU_ISOLATION help Adaptively try to shutdown the tick whenever possible, even when the CPU is running tasks. Typically this requires running a single From 2c43838c99d9d23f17eb2bdadafcb2879cca6995 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 14 Dec 2017 19:18:26 +0100 Subject: [PATCH 19/80] sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default The "isolcpus=" boot parameter support was always built-in before we moved the related code under CONFIG_CPU_ISOLATION. Having it disabled by default is very confusing for people accustomed to use this parameter. So enable it by dafault to keep the previous behaviour but keep it optable for those who want to tinify their kernels. Signed-off-by: Frederic Weisbecker Cc: Chris Metcalf Cc: Christoph Lameter Cc: John Stultz Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Wanpeng Li Cc: kernel test robot Link: http://lkml.kernel.org/r/1513275507-29200-3-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar --- init/Kconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 2934249fba4674..690a381adee0d1 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -461,10 +461,14 @@ endmenu # "CPU/Task time and stats accounting" config CPU_ISOLATION bool "CPU isolation" + default y help Make sure that CPUs running critical tasks are not disturbed by any source of "noise" such as unbound workqueues, timers, kthreads... - Unbound jobs get offloaded to housekeeping CPUs. + Unbound jobs get offloaded to housekeeping CPUs. This is driven by + the "isolcpus=" boot parameter. + + Say Y if unsure. source "kernel/rcu/Kconfig" From d94d105329e4a8a874853b5bd854b6587c41adda Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 14 Dec 2017 19:18:27 +0100 Subject: [PATCH 20/80] sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y The "isolcpus=" and "nohz_full=" boot parameters depend on CPU Isolation support. Let's document that. Signed-off-by: Frederic Weisbecker Cc: Chris Metcalf Cc: Christoph Lameter Cc: John Stultz Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Wanpeng Li Cc: kernel test robot Link: http://lkml.kernel.org/r/1513275507-29200-4-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar --- Documentation/admin-guide/kernel-parameters.rst | 1 + Documentation/admin-guide/kernel-parameters.txt | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index b2598cc9834c3c..7242cbda15dd3b 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -109,6 +109,7 @@ parameter is applicable:: IPV6 IPv6 support is enabled. ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. + ISOL CPU Isolation is enabled. JOY Appropriate joystick support is enabled. KGDB Kernel debugger support is enabled. KVM Kernel Virtual Machine support is enabled. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 6571fbfdb2a152..168310707ec2cd 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1737,7 +1737,7 @@ isapnp= [ISAPNP] Format: ,,, - isolcpus= [KNL,SMP] Isolate a given set of CPUs from disturbance. + isolcpus= [KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance. [Deprecated - use cpusets instead] Format: [flag-list,] @@ -2662,7 +2662,7 @@ Valid arguments: on, off Default: on - nohz_full= [KNL,BOOT] + nohz_full= [KNL,BOOT,SMP,ISOL] The argument is a cpu list, as described above. In kernels built with CONFIG_NO_HZ_FULL=y, set the specified list of CPUs whose tick will be stopped From 869b5567e12f63ea7407f81728ca87f8c0abbfdb Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Tue, 14 Nov 2017 06:53:32 -0700 Subject: [PATCH 21/80] vmbus: unregister device_obj->channels_kset Without the patch, a device can't be thoroughly destroyed, because vmbus_device_register() -> kset_create_and_add() still holds a reference to the hv_device's device.kobj. Signed-off-by: Dexuan Cui Cc: Stephen Hemminger Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 76ed9a216f101e..610223f0e94530 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1378,6 +1378,8 @@ void vmbus_device_unregister(struct hv_device *device_obj) pr_debug("child device %s unregistered\n", dev_name(&device_obj->device)); + kset_unregister(device_obj->channels_kset); + /* * Kick off the process of unregistering the device. * This will call vmbus_remove() and eventually vmbus_device_release() From 7f3dc0088b98533f17128058fac73cd8b2752ef1 Mon Sep 17 00:00:00 2001 From: Todd Kjos Date: Mon, 27 Nov 2017 09:32:33 -0800 Subject: [PATCH 22/80] binder: fix proc->files use-after-free proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos Cc: stable # 4.14 Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 44 ++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index bccec9de05330b..a7ecfde66b7b34 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -482,7 +482,8 @@ enum binder_deferred_state { * @tsk task_struct for group_leader of process * (invariant after initialized) * @files files_struct for process - * (invariant after initialized) + * (protected by @files_lock) + * @files_lock mutex to protect @files * @deferred_work_node: element for binder_deferred_list * (protected by binder_deferred_lock) * @deferred_work: bitmap of deferred work to perform @@ -530,6 +531,7 @@ struct binder_proc { int pid; struct task_struct *tsk; struct files_struct *files; + struct mutex files_lock; struct hlist_node deferred_work_node; int deferred_work; bool is_dead; @@ -877,20 +879,26 @@ static void binder_inc_node_tmpref_ilocked(struct binder_node *node); static int task_get_unused_fd_flags(struct binder_proc *proc, int flags) { - struct files_struct *files = proc->files; unsigned long rlim_cur; unsigned long irqs; + int ret; - if (files == NULL) - return -ESRCH; - - if (!lock_task_sighand(proc->tsk, &irqs)) - return -EMFILE; - + mutex_lock(&proc->files_lock); + if (proc->files == NULL) { + ret = -ESRCH; + goto err; + } + if (!lock_task_sighand(proc->tsk, &irqs)) { + ret = -EMFILE; + goto err; + } rlim_cur = task_rlimit(proc->tsk, RLIMIT_NOFILE); unlock_task_sighand(proc->tsk, &irqs); - return __alloc_fd(files, 0, rlim_cur, flags); + ret = __alloc_fd(proc->files, 0, rlim_cur, flags); +err: + mutex_unlock(&proc->files_lock); + return ret; } /* @@ -899,8 +907,10 @@ static int task_get_unused_fd_flags(struct binder_proc *proc, int flags) static void task_fd_install( struct binder_proc *proc, unsigned int fd, struct file *file) { + mutex_lock(&proc->files_lock); if (proc->files) __fd_install(proc->files, fd, file); + mutex_unlock(&proc->files_lock); } /* @@ -910,9 +920,11 @@ static long task_close_fd(struct binder_proc *proc, unsigned int fd) { int retval; - if (proc->files == NULL) - return -ESRCH; - + mutex_lock(&proc->files_lock); + if (proc->files == NULL) { + retval = -ESRCH; + goto err; + } retval = __close_fd(proc->files, fd); /* can't restart close syscall because file table entry was cleared */ if (unlikely(retval == -ERESTARTSYS || @@ -920,7 +932,8 @@ static long task_close_fd(struct binder_proc *proc, unsigned int fd) retval == -ERESTARTNOHAND || retval == -ERESTART_RESTARTBLOCK)) retval = -EINTR; - +err: + mutex_unlock(&proc->files_lock); return retval; } @@ -4627,7 +4640,9 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) ret = binder_alloc_mmap_handler(&proc->alloc, vma); if (ret) return ret; + mutex_lock(&proc->files_lock); proc->files = get_files_struct(current); + mutex_unlock(&proc->files_lock); return 0; err_bad_arg: @@ -4651,6 +4666,7 @@ static int binder_open(struct inode *nodp, struct file *filp) spin_lock_init(&proc->outer_lock); get_task_struct(current->group_leader); proc->tsk = current->group_leader; + mutex_init(&proc->files_lock); INIT_LIST_HEAD(&proc->todo); proc->default_priority = task_nice(current); binder_dev = container_of(filp->private_data, struct binder_device, @@ -4903,9 +4919,11 @@ static void binder_deferred_func(struct work_struct *work) files = NULL; if (defer & BINDER_DEFERRED_PUT_FILES) { + mutex_lock(&proc->files_lock); files = proc->files; if (files) proc->files = NULL; + mutex_unlock(&proc->files_lock); } if (defer & BINDER_DEFERRED_FLUSH) From 5cfee7a357f60675cae32b494bb2096d7203efd3 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 8 Nov 2017 11:27:37 +0100 Subject: [PATCH 23/80] perf tools: Use shell function for perl cflags retrieval Using the shell function for perl CFLAGS retrieval instead of back quotes (``). Both execute shell with the command, but the latter is more explicit and seems to be the preferred way. Also we don't have any other use of the back quotes in perf Makefiles. Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20171108102739.30338-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index ed65e82f034efe..710623ddb8af66 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -583,7 +583,7 @@ else PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null) PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS)) PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS)) - PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null` + PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null) FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS) ifneq ($(feature-libperl), 1) From 61fb26a6a23c0f1a07a0f8a11b54bafb1ac2398b Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 4 Dec 2017 12:23:08 -0300 Subject: [PATCH 24/80] perf tools: Fix up build in hardened environments On Fedora systems the perl and python CFLAGS/LDFLAGS include the hardened specs from redhat-rpm-config package. We apply them only for perl/python objects, which makes them not compatible with the rest of the objects and the build fails with: /usr/bin/ld: perf-in.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -f +PIC /usr/bin/ld: libperf.a(libperf-in.o): relocation R_X86_64_32S against `.text' can not be used when making a shared object; recompile w +ith -fPIC /usr/bin/ld: final link failed: Nonrepresentable section on output collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:507: perf] Error 1 make[1]: *** [Makefile.perf:210: sub-make] Error 2 make: *** [Makefile:69: all] Error 2 Mainly it's caused by perl/python objects being compiled with: -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 which prevent the final link impossible, because it will check for 'proper' objects with following option: -specs=/usr/lib/rpm/redhat/redhat-hardened-ld Signed-off-by: Jiri Olsa Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lkml.kernel.org/r/20171204082437.GC30564@krava Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.config | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index 710623ddb8af66..0294bfb6c5f87c 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -188,9 +188,7 @@ ifdef PYTHON_CONFIG PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS)) PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null) - ifeq ($(CC_NO_CLANG), 1) - PYTHON_EMBED_CCOPTS := $(filter-out -specs=%,$(PYTHON_EMBED_CCOPTS)) - endif + PYTHON_EMBED_CCOPTS := $(filter-out -specs=%,$(PYTHON_EMBED_CCOPTS)) FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS) endif @@ -576,7 +574,6 @@ ifndef NO_GTK2 endif endif - ifdef NO_LIBPERL CFLAGS += -DNO_LIBPERL else @@ -584,6 +581,8 @@ else PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS)) PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS)) PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null) + PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS)) + PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS)) FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS) ifneq ($(feature-libperl), 1) From ca58d7e64bdfc54f7dfe46713c1e2acc68d7522d Mon Sep 17 00:00:00 2001 From: Ben Gainey Date: Wed, 22 Nov 2017 18:25:41 -0600 Subject: [PATCH 25/80] perf jvmti: Generate correct debug information for inlined code tools/perf/jvmti is broken in so far as it generates incorrect debug information. Specifically it attributes all debug lines to the original method being output even in the case that some code is being inlined from elsewhere. This patch fixes the issue. To test (from within linux/tools/perf): export JDIR=/usr/lib/jvm/java-8-openjdk-amd64/ make cat << __EOF > Test.java public class Test { private StringBuilder b = new StringBuilder(); private void loop(int i, String... args) { for (String a : args) b.append(a); long hc = b.hashCode() * System.nanoTime(); b = new StringBuilder(); b.append(hc); System.out.printf("Iteration %d = %d\n", i, hc); } public void run(String... args) { for (int i = 0; i < 10000; ++i) { loop(i, args); } } public static void main(String... args) { Test t = new Test(); t.run(args); } } __EOF $JDIR/bin/javac Test.java ./perf record -F 10000 -g -k mono $JDIR/bin/java -agentpath:`pwd`/libperf-jvmti.so Test ./perf inject --jit -i perf.data -o perf.data.jitted ./perf annotate -i perf.data.jitted --stdio | grep Test\.java: | sort -u Before this patch, Test.java line numbers get reported that are greater than the number of lines in the Test.java file. They come from the source file of the inlined function, e.g. java/lang/String.java:1085. For further validation one can examine those lines in the JDK source distribution and confirm that they map to inlined functions called by Test.java. After this patch, the filename of the inlined function is output rather than the incorrect original source filename. Signed-off-by: Ben Gainey Tested-by: Arnaldo Carvalho de Melo Tested-by: Stephane Eranian Cc: Alexander Shishkin Cc: Ben Gainey Cc: Colin King Cc: Darren Hart Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 598b7c6919c7 ("perf jit: add source line info support") Link: http://lkml.kernel.org/r/20171122182541.d25599a3eb1ada3480d142fa@arm.com Signed-off-by: Kim Phillips Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/jvmti/jvmti_agent.c | 16 ++-- tools/perf/jvmti/jvmti_agent.h | 7 +- tools/perf/jvmti/libjvmti.c | 147 +++++++++++++++++++++++++++------ 3 files changed, 134 insertions(+), 36 deletions(-) diff --git a/tools/perf/jvmti/jvmti_agent.c b/tools/perf/jvmti/jvmti_agent.c index cf36de7ea25587..0c6d1002b524ea 100644 --- a/tools/perf/jvmti/jvmti_agent.c +++ b/tools/perf/jvmti/jvmti_agent.c @@ -384,13 +384,13 @@ jvmti_write_code(void *agent, char const *sym, } int -jvmti_write_debug_info(void *agent, uint64_t code, const char *file, - jvmti_line_info_t *li, int nr_lines) +jvmti_write_debug_info(void *agent, uint64_t code, + int nr_lines, jvmti_line_info_t *li, + const char * const * file_names) { struct jr_code_debug_info rec; - size_t sret, len, size, flen; + size_t sret, len, size, flen = 0; uint64_t addr; - const char *fn = file; FILE *fp = agent; int i; @@ -405,7 +405,9 @@ jvmti_write_debug_info(void *agent, uint64_t code, const char *file, return -1; } - flen = strlen(file) + 1; + for (i = 0; i < nr_lines; ++i) { + flen += strlen(file_names[i]) + 1; + } rec.p.id = JIT_CODE_DEBUG_INFO; size = sizeof(rec); @@ -421,7 +423,7 @@ jvmti_write_debug_info(void *agent, uint64_t code, const char *file, * file[] : source file name */ size += nr_lines * sizeof(struct debug_entry); - size += flen * nr_lines; + size += flen; rec.p.total_size = size; /* @@ -452,7 +454,7 @@ jvmti_write_debug_info(void *agent, uint64_t code, const char *file, if (sret != 1) goto error; - sret = fwrite_unlocked(fn, flen, 1, fp); + sret = fwrite_unlocked(file_names[i], strlen(file_names[i]) + 1, 1, fp); if (sret != 1) goto error; } diff --git a/tools/perf/jvmti/jvmti_agent.h b/tools/perf/jvmti/jvmti_agent.h index fe32d8344a823f..6ed82f6c06ddd0 100644 --- a/tools/perf/jvmti/jvmti_agent.h +++ b/tools/perf/jvmti/jvmti_agent.h @@ -14,6 +14,7 @@ typedef struct { unsigned long pc; int line_number; int discrim; /* discriminator -- 0 for now */ + jmethodID methodID; } jvmti_line_info_t; void *jvmti_open(void); @@ -22,11 +23,9 @@ int jvmti_write_code(void *agent, char const *symbol_name, uint64_t vma, void const *code, const unsigned int code_size); -int jvmti_write_debug_info(void *agent, - uint64_t code, - const char *file, +int jvmti_write_debug_info(void *agent, uint64_t code, int nr_lines, jvmti_line_info_t *li, - int nr_lines); + const char * const * file_names); #if defined(__cplusplus) } diff --git a/tools/perf/jvmti/libjvmti.c b/tools/perf/jvmti/libjvmti.c index c62c9fc9a52599..6add3e98261413 100644 --- a/tools/perf/jvmti/libjvmti.c +++ b/tools/perf/jvmti/libjvmti.c @@ -47,6 +47,7 @@ do_get_line_numbers(jvmtiEnv *jvmti, void *pc, jmethodID m, jint bci, tab[lines].pc = (unsigned long)pc; tab[lines].line_number = loc_tab[i].line_number; tab[lines].discrim = 0; /* not yet used */ + tab[lines].methodID = m; lines++; } else { break; @@ -125,6 +126,99 @@ get_line_numbers(jvmtiEnv *jvmti, const void *compile_info, jvmti_line_info_t ** return JVMTI_ERROR_NONE; } +static void +copy_class_filename(const char * class_sign, const char * file_name, char * result, size_t max_length) +{ + /* + * Assume path name is class hierarchy, this is a common practice with Java programs + */ + if (*class_sign == 'L') { + int j, i = 0; + char *p = strrchr(class_sign, '/'); + if (p) { + /* drop the 'L' prefix and copy up to the final '/' */ + for (i = 0; i < (p - class_sign); i++) + result[i] = class_sign[i+1]; + } + /* + * append file name, we use loops and not string ops to avoid modifying + * class_sign which is used later for the symbol name + */ + for (j = 0; i < (max_length - 1) && file_name && j < strlen(file_name); j++, i++) + result[i] = file_name[j]; + + result[i] = '\0'; + } else { + /* fallback case */ + size_t file_name_len = strlen(file_name); + strncpy(result, file_name, file_name_len < max_length ? file_name_len : max_length); + } +} + +static jvmtiError +get_source_filename(jvmtiEnv *jvmti, jmethodID methodID, char ** buffer) +{ + jvmtiError ret; + jclass decl_class; + char *file_name = NULL; + char *class_sign = NULL; + char fn[PATH_MAX]; + size_t len; + + ret = (*jvmti)->GetMethodDeclaringClass(jvmti, methodID, &decl_class); + if (ret != JVMTI_ERROR_NONE) { + print_error(jvmti, "GetMethodDeclaringClass", ret); + return ret; + } + + ret = (*jvmti)->GetSourceFileName(jvmti, decl_class, &file_name); + if (ret != JVMTI_ERROR_NONE) { + print_error(jvmti, "GetSourceFileName", ret); + return ret; + } + + ret = (*jvmti)->GetClassSignature(jvmti, decl_class, &class_sign, NULL); + if (ret != JVMTI_ERROR_NONE) { + print_error(jvmti, "GetClassSignature", ret); + goto free_file_name_error; + } + + copy_class_filename(class_sign, file_name, fn, PATH_MAX); + len = strlen(fn); + *buffer = malloc((len + 1) * sizeof(char)); + if (!*buffer) { + print_error(jvmti, "GetClassSignature", ret); + ret = JVMTI_ERROR_OUT_OF_MEMORY; + goto free_class_sign_error; + } + strcpy(*buffer, fn); + ret = JVMTI_ERROR_NONE; + +free_class_sign_error: + (*jvmti)->Deallocate(jvmti, (unsigned char *)class_sign); +free_file_name_error: + (*jvmti)->Deallocate(jvmti, (unsigned char *)file_name); + + return ret; +} + +static jvmtiError +fill_source_filenames(jvmtiEnv *jvmti, int nr_lines, + const jvmti_line_info_t * line_tab, + char ** file_names) +{ + int index; + jvmtiError ret; + + for (index = 0; index < nr_lines; ++index) { + ret = get_source_filename(jvmti, line_tab[index].methodID, &(file_names[index])); + if (ret != JVMTI_ERROR_NONE) + return ret; + } + + return JVMTI_ERROR_NONE; +} + static void JNICALL compiled_method_load_cb(jvmtiEnv *jvmti, jmethodID method, @@ -135,16 +229,18 @@ compiled_method_load_cb(jvmtiEnv *jvmti, const void *compile_info) { jvmti_line_info_t *line_tab = NULL; + char ** line_file_names = NULL; jclass decl_class; char *class_sign = NULL; char *func_name = NULL; char *func_sign = NULL; - char *file_name= NULL; + char *file_name = NULL; char fn[PATH_MAX]; uint64_t addr = (uint64_t)(uintptr_t)code_addr; jvmtiError ret; int nr_lines = 0; /* in line_tab[] */ size_t len; + int output_debug_info = 0; ret = (*jvmti)->GetMethodDeclaringClass(jvmti, method, &decl_class); @@ -158,6 +254,19 @@ compiled_method_load_cb(jvmtiEnv *jvmti, if (ret != JVMTI_ERROR_NONE) { warnx("jvmti: cannot get line table for method"); nr_lines = 0; + } else if (nr_lines > 0) { + line_file_names = malloc(sizeof(char*) * nr_lines); + if (!line_file_names) { + warnx("jvmti: cannot allocate space for line table method names"); + } else { + memset(line_file_names, 0, sizeof(char*) * nr_lines); + ret = fill_source_filenames(jvmti, nr_lines, line_tab, line_file_names); + if (ret != JVMTI_ERROR_NONE) { + warnx("jvmti: fill_source_filenames failed"); + } else { + output_debug_info = 1; + } + } } } @@ -181,33 +290,14 @@ compiled_method_load_cb(jvmtiEnv *jvmti, goto error; } - /* - * Assume path name is class hierarchy, this is a common practice with Java programs - */ - if (*class_sign == 'L') { - int j, i = 0; - char *p = strrchr(class_sign, '/'); - if (p) { - /* drop the 'L' prefix and copy up to the final '/' */ - for (i = 0; i < (p - class_sign); i++) - fn[i] = class_sign[i+1]; - } - /* - * append file name, we use loops and not string ops to avoid modifying - * class_sign which is used later for the symbol name - */ - for (j = 0; i < (PATH_MAX - 1) && file_name && j < strlen(file_name); j++, i++) - fn[i] = file_name[j]; - fn[i] = '\0'; - } else { - /* fallback case */ - strcpy(fn, file_name); - } + copy_class_filename(class_sign, file_name, fn, PATH_MAX); + /* * write source line info record if we have it */ - if (jvmti_write_debug_info(jvmti_agent, addr, fn, line_tab, nr_lines)) - warnx("jvmti: write_debug_info() failed"); + if (output_debug_info) + if (jvmti_write_debug_info(jvmti_agent, addr, nr_lines, line_tab, (const char * const *) line_file_names)) + warnx("jvmti: write_debug_info() failed"); len = strlen(func_name) + strlen(class_sign) + strlen(func_sign) + 2; { @@ -223,6 +313,13 @@ compiled_method_load_cb(jvmtiEnv *jvmti, (*jvmti)->Deallocate(jvmti, (unsigned char *)class_sign); (*jvmti)->Deallocate(jvmti, (unsigned char *)file_name); free(line_tab); + while (line_file_names && (nr_lines > 0)) { + if (line_file_names[nr_lines - 1]) { + free(line_file_names[nr_lines - 1]); + } + nr_lines -= 1; + } + free(line_file_names); } static void JNICALL From 10b9baa701d5023897f70a4acb3bf0235da3dc4f Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 28 Nov 2017 11:08:41 -0300 Subject: [PATCH 26/80] tools arch s390: Do not include header files from the kernel sources Long ago we decided to be verbotten including files in the kernel git sources from tools/ living source code, to avoid disturbing kernel development (and perf's and other tools/) when, say, a kernel hacker adds something, tests everything but tools/ and have tools/ build broken. This got broken recently by s/390, fix it by copying arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/, making this one be used by means of and updating tools/perf/check_headers.sh to make sure we are notified when the original changes, so that we can check if anything is needed on the tooling side. This would have been caught by the 'tarkpg' test entry in: $ make -C tools/perf build-test When run on a s/390 build system or container. Acked-by: Heiko Carstens Cc: Hendrik Brueckner Cc: Thomas Richter Cc: Martin Schwidefsky Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Fixes: f704ef44602f ("s390/perf: add support for perf_regs and libdw") Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/s390/include/uapi/asm/perf_regs.h | 44 ++++++++++++++++++++ tools/perf/arch/s390/include/perf_regs.h | 2 +- tools/perf/check-headers.sh | 1 + 3 files changed, 46 insertions(+), 1 deletion(-) create mode 100644 tools/arch/s390/include/uapi/asm/perf_regs.h diff --git a/tools/arch/s390/include/uapi/asm/perf_regs.h b/tools/arch/s390/include/uapi/asm/perf_regs.h new file mode 100644 index 00000000000000..d17dd9e5d51638 --- /dev/null +++ b/tools/arch/s390/include/uapi/asm/perf_regs.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _ASM_S390_PERF_REGS_H +#define _ASM_S390_PERF_REGS_H + +enum perf_event_s390_regs { + PERF_REG_S390_R0, + PERF_REG_S390_R1, + PERF_REG_S390_R2, + PERF_REG_S390_R3, + PERF_REG_S390_R4, + PERF_REG_S390_R5, + PERF_REG_S390_R6, + PERF_REG_S390_R7, + PERF_REG_S390_R8, + PERF_REG_S390_R9, + PERF_REG_S390_R10, + PERF_REG_S390_R11, + PERF_REG_S390_R12, + PERF_REG_S390_R13, + PERF_REG_S390_R14, + PERF_REG_S390_R15, + PERF_REG_S390_FP0, + PERF_REG_S390_FP1, + PERF_REG_S390_FP2, + PERF_REG_S390_FP3, + PERF_REG_S390_FP4, + PERF_REG_S390_FP5, + PERF_REG_S390_FP6, + PERF_REG_S390_FP7, + PERF_REG_S390_FP8, + PERF_REG_S390_FP9, + PERF_REG_S390_FP10, + PERF_REG_S390_FP11, + PERF_REG_S390_FP12, + PERF_REG_S390_FP13, + PERF_REG_S390_FP14, + PERF_REG_S390_FP15, + PERF_REG_S390_MASK, + PERF_REG_S390_PC, + + PERF_REG_S390_MAX +}; + +#endif /* _ASM_S390_PERF_REGS_H */ diff --git a/tools/perf/arch/s390/include/perf_regs.h b/tools/perf/arch/s390/include/perf_regs.h index d2df54a6bc5a24..bcfbaed78cc257 100644 --- a/tools/perf/arch/s390/include/perf_regs.h +++ b/tools/perf/arch/s390/include/perf_regs.h @@ -3,7 +3,7 @@ #include #include -#include <../../../../arch/s390/include/uapi/asm/perf_regs.h> +#include void perf_regs_load(u64 *regs); diff --git a/tools/perf/check-headers.sh b/tools/perf/check-headers.sh index 6db9d809fe9722..3e64f10b6d6678 100755 --- a/tools/perf/check-headers.sh +++ b/tools/perf/check-headers.sh @@ -21,6 +21,7 @@ arch/x86/include/asm/cpufeatures.h arch/arm/include/uapi/asm/perf_regs.h arch/arm64/include/uapi/asm/perf_regs.h arch/powerpc/include/uapi/asm/perf_regs.h +arch/s390/include/uapi/asm/perf_regs.h arch/x86/include/uapi/asm/perf_regs.h arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm_perf.h From ca26cffa4e4aaeb09bb9e308f95c7835cb149248 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 4 Dec 2017 13:08:47 -0300 Subject: [PATCH 27/80] x86/asm: Allow again using asm.h when building for the 'bpf' clang target Up to f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") we were able to use x86 headers to build to the 'bpf' clang target, as done by the BPF code in tools/perf/. With that commit, we ended up with following failure for 'perf test LLVM', this is because "clang ... -target bpf ..." fails since 4.0 does not have bpf inline asm support and 6.0 does not recognize the register 'esp', fix it by guarding that part with an #ifndef __BPF__, that is defined by clang when building to the "bpf" target. # perf test -v LLVM 37: LLVM search and compile : 37.1: Basic BPF llvm compile : --- start --- test child forked, pid 25526 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=SyS_epoll_wait") int bpf_func__SyS_epoll_wait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- LLVM search and compile subtest 0: Ok 37.2: kbuild searching : --- start --- test child forked, pid 25950 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-test-kbuild.c * Test include from kernel header */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define SEC(NAME) __attribute__((section(NAME), used)) #include #include SEC("func=vfs_llseek") int bpf_func__vfs_llseek(void *ctx) { return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - In file included from :12: In file included from /home/acme/git/linux/arch/x86/include/uapi/asm/ptrace.h:5: In file included from /home/acme/git/linux/include/linux/compiler.h:242: In file included from /home/acme/git/linux/arch/x86/include/asm/barrier.h:5: In file included from /home/acme/git/linux/arch/x86/include/asm/alternative.h:10: /home/acme/git/linux/arch/x86/include/asm/asm.h:145:50: error: unknown register name 'esp' in asm register unsigned long current_stack_pointer asm(_ASM_SP); ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:44:18: note: expanded from macro '_ASM_SP' #define _ASM_SP __ASM_REG(sp) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:27:32: note: expanded from macro '__ASM_REG' #define __ASM_REG(reg) __ASM_SEL_RAW(e##reg, r##reg) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:18:29: note: expanded from macro '__ASM_SEL_RAW' # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:11:32: note: expanded from macro '__ASM_FORM_RAW' # define __ASM_FORM_RAW(x) #x ^ :4:1: note: expanded from here "esp" ^ 1 error generated. ERROR: unable to compile - Hint: Check error message shown above. Hint: You can also pre-compile it into .o using: clang -target bpf -O2 -c - with proper -I and -D options. Failed to compile test case: 'kbuild searching' test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED! Cc: Adrian Hunter Cc: Alexander Potapenko Cc: Alexei Starovoitov Cc: Andrey Ryabinin Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Daniel Borkmann Cc: David Ahern Cc: Dmitriy Vyukov Cc: Jiri Olsa Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Matthias Kaehlcke Cc: Miguel Bernal Marin Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Wang Nan Cc: Yonghong Song Link: https://lkml.kernel.org/r/20171128175948.GL3298@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- arch/x86/include/asm/asm.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h index 219faaec51dfa1..386a6900e206f6 100644 --- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -136,6 +136,7 @@ #endif #ifndef __ASSEMBLY__ +#ifndef __BPF__ /* * This output constraint should be used for any inline asm which has a "call" * instruction. Otherwise the asm may be inserted before the frame pointer @@ -145,5 +146,6 @@ register unsigned long current_stack_pointer asm(_ASM_SP); #define ASM_CALL_CONSTRAINT "+r" (current_stack_pointer) #endif +#endif #endif /* _ASM_X86_ASM_H */ From 81b6c999897919d5a16fedc018fe375dbab091c5 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 13 Dec 2017 14:21:37 +0100 Subject: [PATCH 28/80] scsi: core: check for device state in __scsi_remove_target() As it turned out device_get() doesn't use kref_get_unless_zero(), so we will be always getting a device pointer. Consequently, we need to check for the device state in __scsi_remove_target() to avoid tripping over deleted objects. Fixes: fbce4d97fd43 ("scsi: fixup kernel warning during rmmod()") Reported-by: Jason Yan Signed-off-by: Hannes Reinecke Reviewed-by: Bart Van Assche Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_sysfs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index a9996c16f4ae63..26ce17178401b6 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1415,7 +1415,10 @@ static void __scsi_remove_target(struct scsi_target *starget) * check. */ if (sdev->channel != starget->channel || - sdev->id != starget->id || + sdev->id != starget->id) + continue; + if (sdev->sdev_state == SDEV_DEL || + sdev->sdev_state == SDEV_CANCEL || !get_device(&sdev->sdev_gendev)) continue; spin_unlock_irqrestore(shost->host_lock, flags); From 6454b3bdd138dfc640deb5e7b9a0668fca2d55dd Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 18 Dec 2017 15:13:44 -0600 Subject: [PATCH 29/80] x86/stacktrace: Make zombie stack traces reliable Commit: 1959a60182f4 ("x86/dumpstack: Pin the target stack when dumping it") changed the behavior of stack traces for zombies. Before that commit, /proc//stack reported the last execution path of the zombie before it died: [] do_exit+0x6f7/0xa80 [] do_group_exit+0x39/0xa0 [] __wake_up_parent+0x0/0x30 [] system_call_fastpath+0x16/0x1b [<00007fd128f9c4f9>] 0x7fd128f9c4f9 [] 0xffffffffffffffff After the commit, it just reports an empty stack trace. The new behavior is actually probably more correct. If the stack refcount has gone down to zero, then the task has already gone through do_exit() and isn't going to run anymore. The stack could be freed at any time and is basically gone, so reporting an empty stack makes sense. However, save_stack_trace_tsk_reliable() treats such a missing stack condition as an error. That can cause livepatch transition stalls if there are any unreaped zombies. Instead, just treat it as a reliable, empty stack. Reported-and-tested-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: live-patching@vger.kernel.org Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Link: http://lkml.kernel.org/r/e4b09e630e99d0c1080528f0821fc9d9dbaeea82.1513631620.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/stacktrace.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 77835bc021c766..20161ef53537c7 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -164,8 +164,12 @@ int save_stack_trace_tsk_reliable(struct task_struct *tsk, { int ret; + /* + * If the task doesn't have a stack (e.g., a zombie), the stack is + * "reliably" empty. + */ if (!try_get_task_stack(tsk)) - return -EINVAL; + return 0; ret = __save_stack_trace_reliable(trace, tsk); From 3920bb713038810f25770e7545b79f204685c8f2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZ=20Lin=20=28=E6=9E=97=E4=B8=8A=E6=99=BA=29?= Date: Tue, 19 Dec 2017 17:40:32 +0800 Subject: [PATCH 30/80] USB: serial: option: adding support for YUGA CLM920-NC5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by: Taiyi Wu Signed-off-by: SZ Lin (林上智) Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b02fb576b85699..b6320e3be42970 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -233,6 +233,8 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Qualcomm's vendor ID */ #define QUECTEL_PRODUCT_UC20 0x9003 #define QUECTEL_PRODUCT_UC15 0x9090 +/* These Yuga products use Qualcomm's vendor ID */ +#define YUGA_PRODUCT_CLM920_NC5 0x9625 #define QUECTEL_VENDOR_ID 0x2c7c /* These Quectel products use Quectel's vendor ID */ @@ -680,6 +682,10 @@ static const struct option_blacklist_info cinterion_rmnet2_blacklist = { .reserved = BIT(4) | BIT(5), }; +static const struct option_blacklist_info yuga_clm920_nc5_blacklist = { + .reserved = BIT(1) | BIT(4), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1184,6 +1190,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + /* Yuga products use Qualcomm vendor ID */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5), + .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, From 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 19 Dec 2017 11:14:42 +0200 Subject: [PATCH 31/80] USB: Fix off by one in type-specific length check of BOS SSP capability USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a off by one in commit 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes the zero based SSAC as argument, not the actual count of sublink speed attributes. USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1." The type-specific length check patch was added to stable and needs to be fixed there as well Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") Cc: linux-stable CC: Masakazu Mokuno Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 78e92d29f8d987..c821b4b9647e35 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1007,7 +1007,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) case USB_SSP_CAP_TYPE: ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; ssac = (le32_to_cpu(ssp_cap->bmAttributes) & - USB_SSP_SUBLINK_SPEED_ATTRIBS) + 1; + USB_SSP_SUBLINK_SPEED_ATTRIBS); if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) dev->bos->ssp_cap = ssp_cap; break; From 8272d099d05f7ab2776cf56a2ab9f9443be18907 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 18 Dec 2017 17:24:22 -0700 Subject: [PATCH 32/80] usbip: vhci: stop printing kernel pointer addresses in messages Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 10 ---------- drivers/usb/usbip/vhci_rx.c | 23 +++++++++++------------ drivers/usb/usbip/vhci_tx.c | 3 ++- 3 files changed, 13 insertions(+), 23 deletions(-) diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 6b3278c4b72a0d..9efab3dc37344e 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -656,9 +656,6 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag struct vhci_device *vdev; unsigned long flags; - usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", - hcd, urb, mem_flags); - if (portnum > VHCI_HC_PORTS) { pr_err("invalid port number %d\n", portnum); return -ENODEV; @@ -822,8 +819,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) struct vhci_device *vdev; unsigned long flags; - pr_info("dequeue a urb %p\n", urb); - spin_lock_irqsave(&vhci->lock, flags); priv = urb->hcpriv; @@ -851,7 +846,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) /* tcp connection is closed */ spin_lock(&vdev->priv_lock); - pr_info("device %p seems to be disconnected\n", vdev); list_del(&priv->list); kfree(priv); urb->hcpriv = NULL; @@ -863,8 +857,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) * vhci_rx will receive RET_UNLINK and give back the URB. * Otherwise, we give back it here. */ - pr_info("gives back urb %p\n", urb); - usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&vhci->lock, flags); @@ -892,8 +884,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) unlink->unlink_seqnum = priv->seqnum; - pr_info("device %p seems to be still connected\n", vdev); - /* send cmd_unlink and try to cancel the pending URB in the * peer */ list_add_tail(&unlink->list, &vdev->unlink_tx); diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index 90577e8b228239..112ebb90d8c95e 100644 --- a/drivers/usb/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c @@ -23,24 +23,23 @@ struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum) urb = priv->urb; status = urb->status; - usbip_dbg_vhci_rx("find urb %p vurb %p seqnum %u\n", - urb, priv, seqnum); + usbip_dbg_vhci_rx("find urb seqnum %u\n", seqnum); switch (status) { case -ENOENT: /* fall through */ case -ECONNRESET: - dev_info(&urb->dev->dev, - "urb %p was unlinked %ssynchronuously.\n", urb, - status == -ENOENT ? "" : "a"); + dev_dbg(&urb->dev->dev, + "urb seq# %u was unlinked %ssynchronuously\n", + seqnum, status == -ENOENT ? "" : "a"); break; case -EINPROGRESS: /* no info output */ break; default: - dev_info(&urb->dev->dev, - "urb %p may be in a error, status %d\n", urb, - status); + dev_dbg(&urb->dev->dev, + "urb seq# %u may be in a error, status %d\n", + seqnum, status); } list_del(&priv->list); @@ -67,8 +66,8 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, spin_unlock_irqrestore(&vdev->priv_lock, flags); if (!urb) { - pr_err("cannot find a urb of seqnum %u\n", pdu->base.seqnum); - pr_info("max seqnum %d\n", + pr_err("cannot find a urb of seqnum %u max seqnum %d\n", + pdu->base.seqnum, atomic_read(&vhci_hcd->seqnum)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; @@ -91,7 +90,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, if (usbip_dbg_flag_vhci_rx) usbip_dump_urb(urb); - usbip_dbg_vhci_rx("now giveback urb %p\n", urb); + usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum); spin_lock_irqsave(&vhci->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_hcd_to_hcd(vhci_hcd), urb); @@ -158,7 +157,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, pr_info("the urb (seqnum %d) was already given back\n", pdu->base.seqnum); } else { - usbip_dbg_vhci_rx("now giveback urb %p\n", urb); + usbip_dbg_vhci_rx("now giveback urb %d\n", pdu->base.seqnum); /* If unlink is successful, status is -ECONNRESET */ urb->status = pdu->u.ret_unlink.status; diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c index d625a2ff4b712f..9aed15a358b7b9 100644 --- a/drivers/usb/usbip/vhci_tx.c +++ b/drivers/usb/usbip/vhci_tx.c @@ -69,7 +69,8 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev) memset(&msg, 0, sizeof(msg)); memset(&iov, 0, sizeof(iov)); - usbip_dbg_vhci_tx("setup txdata urb %p\n", urb); + usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n", + priv->seqnum); /* 1. setup usbip_header */ setup_cmd_submit_pdu(&pdu_header, urb); From 248a22044366f588d46754c54dfe29ffe4f8b4df Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 18 Dec 2017 17:23:37 -0700 Subject: [PATCH 33/80] usbip: stub: stop printing kernel pointer addresses in messages Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_main.c | 5 +++-- drivers/usb/usbip/stub_rx.c | 7 ++----- drivers/usb/usbip/stub_tx.c | 6 +++--- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index 4f48b306713f1a..c31c8402a0c55d 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -237,11 +237,12 @@ void stub_device_cleanup_urbs(struct stub_device *sdev) struct stub_priv *priv; struct urb *urb; - dev_dbg(&sdev->udev->dev, "free sdev %p\n", sdev); + dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n"); while ((priv = stub_priv_pop(sdev))) { urb = priv->urb; - dev_dbg(&sdev->udev->dev, "free urb %p\n", urb); + dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n", + priv->seqnum); usb_kill_urb(urb); kmem_cache_free(stub_priv_cache, priv); diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 493ac2928391ac..2f29be4740980f 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -211,9 +211,6 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev, if (priv->seqnum != pdu->u.cmd_unlink.seqnum) continue; - dev_info(&priv->urb->dev->dev, "unlink urb %p\n", - priv->urb); - /* * This matched urb is not completed yet (i.e., be in * flight in usb hcd hardware/driver). Now we are @@ -252,8 +249,8 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev, ret = usb_unlink_urb(priv->urb); if (ret != -EINPROGRESS) dev_err(&priv->urb->dev->dev, - "failed to unlink a urb %p, ret %d\n", - priv->urb, ret); + "failed to unlink a urb # %lu, ret %d\n", + priv->seqnum, ret); return 0; } diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index 53172b1f6257cf..f0ec41a50cbc16 100644 --- a/drivers/usb/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c @@ -88,7 +88,7 @@ void stub_complete(struct urb *urb) /* link a urb to the queue of tx. */ spin_lock_irqsave(&sdev->priv_lock, flags); if (sdev->ud.tcp_socket == NULL) { - usbip_dbg_stub_tx("ignore urb for closed connection %p", urb); + usbip_dbg_stub_tx("ignore urb for closed connection\n"); /* It will be freed in stub_device_cleanup_urbs(). */ } else if (priv->unlinking) { stub_enqueue_ret_unlink(sdev, priv->seqnum, urb->status); @@ -190,8 +190,8 @@ static int stub_send_ret_submit(struct stub_device *sdev) /* 1. setup usbip_header */ setup_ret_submit_pdu(&pdu_header, urb); - usbip_dbg_stub_tx("setup txdata seqnum: %d urb: %p\n", - pdu_header.base.seqnum, urb); + usbip_dbg_stub_tx("setup txdata seqnum: %d\n", + pdu_header.base.seqnum); usbip_header_correct_endian(&pdu_header, 1); iov[iovnum].iov_base = &pdu_header; From 90120d15f4c397272aaf41077960a157fc4212bf Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 15 Dec 2017 10:50:09 -0700 Subject: [PATCH 34/80] usbip: prevent leaking socket pointer address in messages usbip driver is leaking socket pointer address in messages. Remove the messages that aren't useful and print sockfd in the ones that are useful for debugging. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_dev.c | 3 +-- drivers/usb/usbip/usbip_common.c | 16 +++++----------- drivers/usb/usbip/vhci_hcd.c | 2 +- 3 files changed, 7 insertions(+), 14 deletions(-) diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index a3df8ee82faff7..e31a6f204397db 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -149,8 +149,7 @@ static void stub_shutdown_connection(struct usbip_device *ud) * step 1? */ if (ud->tcp_socket) { - dev_dbg(&sdev->udev->dev, "shutdown tcp_socket %p\n", - ud->tcp_socket); + dev_dbg(&sdev->udev->dev, "shutdown sockfd %d\n", ud->sockfd); kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); } diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index f7978933b40290..7b219d9109b412 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -317,26 +317,20 @@ int usbip_recv(struct socket *sock, void *buf, int size) struct msghdr msg = {.msg_flags = MSG_NOSIGNAL}; int total = 0; + if (!sock || !buf || !size) + return -EINVAL; + iov_iter_kvec(&msg.msg_iter, READ|ITER_KVEC, &iov, 1, size); usbip_dbg_xmit("enter\n"); - if (!sock || !buf || !size) { - pr_err("invalid arg, sock %p buff %p size %d\n", sock, buf, - size); - return -EINVAL; - } - do { - int sz = msg_data_left(&msg); + msg_data_left(&msg); sock->sk->sk_allocation = GFP_NOIO; result = sock_recvmsg(sock, &msg, MSG_WAITALL); - if (result <= 0) { - pr_debug("receive sock %p buf %p size %u ret %d total %d\n", - sock, buf + total, sz, result, total); + if (result <= 0) goto err; - } total += result; } while (msg_data_left(&msg)); diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 9efab3dc37344e..c3e1008aa491ee 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -965,7 +965,7 @@ static void vhci_shutdown_connection(struct usbip_device *ud) /* need this? see stub_dev.c */ if (ud->tcp_socket) { - pr_debug("shutdown tcp_socket %p\n", ud->tcp_socket); + pr_debug("shutdown tcp_socket %d\n", ud->sockfd); kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); } From 10c90120930628e8b959bf58d4a0aaef3ae5d945 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Fri, 15 Dec 2017 10:05:15 -0700 Subject: [PATCH 35/80] usbip: stub_rx: fix static checker warning on unnecessary checks Fix the following static checker warnings: The patch c6688ef9f297: "usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input" from Dec 7, 2017, leads to the following static checker warning: drivers/usb/usbip/stub_rx.c:346 get_pipe() warn: impossible condition '(pdu->u.cmd_submit.transfer_buffer_length > ((~0 >> 1))) => (s32min-s32max > s32max)' drivers/usb/usbip/stub_rx.c:486 stub_recv_cmd_submit() warn: always true condition '(pdu->u.cmd_submit.transfer_buffer_length <= ((~0 >> 1))) => (s32min-s32max <= s32max)' Reported-by: Dan Carpenter Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_rx.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 2f29be4740980f..6c5a593139996f 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -339,14 +339,6 @@ static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu) epd = &ep->desc; - /* validate transfer_buffer_length */ - if (pdu->u.cmd_submit.transfer_buffer_length > INT_MAX) { - dev_err(&sdev->udev->dev, - "CMD_SUBMIT: -EMSGSIZE transfer_buffer_length %d\n", - pdu->u.cmd_submit.transfer_buffer_length); - return -1; - } - if (usb_endpoint_xfer_control(epd)) { if (dir == USBIP_DIR_OUT) return usb_sndctrlpipe(udev, epnum); @@ -479,8 +471,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, } /* allocate urb transfer buffer, if needed */ - if (pdu->u.cmd_submit.transfer_buffer_length > 0 && - pdu->u.cmd_submit.transfer_buffer_length <= INT_MAX) { + if (pdu->u.cmd_submit.transfer_buffer_length > 0) { priv->urb->transfer_buffer = kzalloc(pdu->u.cmd_submit.transfer_buffer_length, GFP_KERNEL); From 544c4605acc5ae4afe7dd5914147947db182f2fb Mon Sep 17 00:00:00 2001 From: Juan Zea Date: Fri, 15 Dec 2017 10:21:20 +0100 Subject: [PATCH 36/80] usbip: fix usbip bind writing random string after command in match_busid usbip bind writes commands followed by random string when writing to match_busid attribute in sysfs, caused by using full variable size instead of string length. Signed-off-by: Juan Zea Acked-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- tools/usb/usbip/src/utils.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/tools/usb/usbip/src/utils.c b/tools/usb/usbip/src/utils.c index 2b3d6d2350158b..3d7b42e7729941 100644 --- a/tools/usb/usbip/src/utils.c +++ b/tools/usb/usbip/src/utils.c @@ -30,6 +30,7 @@ int modify_match_busid(char *busid, int add) char command[SYSFS_BUS_ID_SIZE + 4]; char match_busid_attr_path[SYSFS_PATH_MAX]; int rc; + int cmd_size; snprintf(match_busid_attr_path, sizeof(match_busid_attr_path), "%s/%s/%s/%s/%s/%s", SYSFS_MNT_PATH, SYSFS_BUS_NAME, @@ -37,12 +38,14 @@ int modify_match_busid(char *busid, int add) attr_name); if (add) - snprintf(command, SYSFS_BUS_ID_SIZE + 4, "add %s", busid); + cmd_size = snprintf(command, SYSFS_BUS_ID_SIZE + 4, "add %s", + busid); else - snprintf(command, SYSFS_BUS_ID_SIZE + 4, "del %s", busid); + cmd_size = snprintf(command, SYSFS_BUS_ID_SIZE + 4, "del %s", + busid); rc = write_sysfs_attribute(match_busid_attr_path, command, - sizeof(command)); + cmd_size); if (rc < 0) { dbg("failed to write match_busid: %s", strerror(errno)); return -1; From b9096d9f15c142574ebebe8fbb137012bb9d99c2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 12 Dec 2017 16:11:30 +0100 Subject: [PATCH 37/80] usb: add RESET_RESUME for ELSA MicroLink 56K This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index a10b346b9777db..95812656d9b9ba 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -149,6 +149,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + /* ELSA MicroLink 56K */ + { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, From 7f038d256c723dd390d2fca942919573995f4cfd Mon Sep 17 00:00:00 2001 From: Dmitry Fleytman Dmitry Fleytman Date: Tue, 19 Dec 2017 06:02:04 +0200 Subject: [PATCH 38/80] usb: Add device quirk for Logitech HD Pro Webcam C925e Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 95812656d9b9ba..4024926c1d68c9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -52,10 +52,11 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Logitech HD Pro Webcams C920, C920-C and C930e */ + /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech ConferenceCam CC3000e */ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, From a93639090a2743c8e205c1ac25439702702b4ce4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 14 Dec 2017 15:43:43 +1100 Subject: [PATCH 39/80] staging: lustre: lnet: Fix recent breakage from list_for_each conversion Commit 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry") was intended to be an idempotent change, but actually broke the behavior of ksocknal_add_peer() causing mounts to fail. The fact that it caused an existing "route2 = NULL;" to become redundant could have been a clue. The fact that the loop body set the new loop variable to NULL might also have been a clue The original code relied on "route2" being NULL if nothing was found. The new code would always set route2 to a non-NULL value if the list was empty, and would likely crash if the list was not empty. Restore correct functionality by using code-flow rather the value of "route2" to determine whether to use on old route, or to add a new one. Fixes: 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry") Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman --- .../lustre/lnet/klnds/socklnd/socklnd.c | 23 ++++++++----------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c index 986c2a40d9780e..8267119ccc8e73 100644 --- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c +++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c @@ -487,21 +487,18 @@ ksocknal_add_peer(struct lnet_ni *ni, struct lnet_process_id id, __u32 ipaddr, ksocknal_nid2peerlist(id.nid)); } - route2 = NULL; list_for_each_entry(route2, &peer->ksnp_routes, ksnr_list) { - if (route2->ksnr_ipaddr == ipaddr) - break; - - route2 = NULL; - } - if (!route2) { - ksocknal_add_route_locked(peer, route); - route->ksnr_share_count++; - } else { - ksocknal_route_decref(route); - route2->ksnr_share_count++; + if (route2->ksnr_ipaddr == ipaddr) { + /* Route already exists, use the old one */ + ksocknal_route_decref(route); + route2->ksnr_share_count++; + goto out; + } } - + /* Route doesn't already exist, add the new one */ + ksocknal_add_route_locked(peer, route); + route->ksnr_share_count++; +out: write_unlock_bh(&ksocknal_data.ksnd_global_lock); return 0; From f292b9b28097d8fe870336108e91bd95a14294bf Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 15 Dec 2017 19:59:47 -0800 Subject: [PATCH 40/80] staging: ion: Fix ion_cma_heap allocations In trying to add support for drm_hwcomposer to HiKey, I've needed to utilize the ION CMA heap, and I've noticed problems with allocations on newer kernels failing. It seems back with 204f672255c2 ("ion: Use CMA APIs directly"), the ion_cma_heap code was modified to use the CMA API, but kept the arguments as buffer lengths rather then number of pages. This results in errors as we don't have enough pages in CMA to satisfy the exaggerated requests. This patch converts the ion_cma_heap CMA API usage to properly request pages. It also fixes a minor issue in the allocation where in the error path, the cma_release is called with the buffer->size value which hasn't yet been set. Cc: Laura Abbott Cc: Sumit Semwal Cc: Benjamin Gaignard Cc: Archit Taneja Cc: Greg KH Cc: Daniel Vetter Cc: Dmitry Shmidt Cc: Todd Kjos Cc: Amit Pundir Fixes: 204f672255c2 ("staging: android: ion: Use CMA APIs directly") Acked-by: Laura Abbott Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/Kconfig | 2 +- drivers/staging/android/ion/ion_cma_heap.c | 15 +++++++++++---- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/staging/android/ion/Kconfig b/drivers/staging/android/ion/Kconfig index a517b2d29f1bb6..8f6494158d3d01 100644 --- a/drivers/staging/android/ion/Kconfig +++ b/drivers/staging/android/ion/Kconfig @@ -37,7 +37,7 @@ config ION_CHUNK_HEAP config ION_CMA_HEAP bool "Ion CMA heap support" - depends on ION && CMA + depends on ION && DMA_CMA help Choose this option to enable CMA heaps with Ion. This heap is backed by the Contiguous Memory Allocator (CMA). If your system has these diff --git a/drivers/staging/android/ion/ion_cma_heap.c b/drivers/staging/android/ion/ion_cma_heap.c index dd5545d9990a0f..86196ffd2faf9a 100644 --- a/drivers/staging/android/ion/ion_cma_heap.c +++ b/drivers/staging/android/ion/ion_cma_heap.c @@ -39,9 +39,15 @@ static int ion_cma_allocate(struct ion_heap *heap, struct ion_buffer *buffer, struct ion_cma_heap *cma_heap = to_cma_heap(heap); struct sg_table *table; struct page *pages; + unsigned long size = PAGE_ALIGN(len); + unsigned long nr_pages = size >> PAGE_SHIFT; + unsigned long align = get_order(size); int ret; - pages = cma_alloc(cma_heap->cma, len, 0, GFP_KERNEL); + if (align > CONFIG_CMA_ALIGNMENT) + align = CONFIG_CMA_ALIGNMENT; + + pages = cma_alloc(cma_heap->cma, nr_pages, align, GFP_KERNEL); if (!pages) return -ENOMEM; @@ -53,7 +59,7 @@ static int ion_cma_allocate(struct ion_heap *heap, struct ion_buffer *buffer, if (ret) goto free_mem; - sg_set_page(table->sgl, pages, len, 0); + sg_set_page(table->sgl, pages, size, 0); buffer->priv_virt = pages; buffer->sg_table = table; @@ -62,7 +68,7 @@ static int ion_cma_allocate(struct ion_heap *heap, struct ion_buffer *buffer, free_mem: kfree(table); err: - cma_release(cma_heap->cma, pages, buffer->size); + cma_release(cma_heap->cma, pages, nr_pages); return -ENOMEM; } @@ -70,9 +76,10 @@ static void ion_cma_free(struct ion_buffer *buffer) { struct ion_cma_heap *cma_heap = to_cma_heap(buffer->heap); struct page *pages = buffer->priv_virt; + unsigned long nr_pages = PAGE_ALIGN(buffer->size) >> PAGE_SHIFT; /* release memory */ - cma_release(cma_heap->cma, pages, buffer->size); + cma_release(cma_heap->cma, pages, nr_pages); /* release sg table */ sg_free_table(buffer->sg_table); kfree(buffer->sg_table); From d6b246bb7a29703f53aa4c050b8b3205d749caee Mon Sep 17 00:00:00 2001 From: Sushmita Susheelendra Date: Fri, 15 Dec 2017 13:59:13 -0700 Subject: [PATCH 41/80] staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device Use the direction argument passed into begin_cpu_access and end_cpu_access when calling the dma_sync_sg_for_cpu/device. The actual cache primitive called depends on the direction passed in. Signed-off-by: Sushmita Susheelendra Cc: stable Acked-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/ion.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c index a7d9b0e9857225..f480885e346b69 100644 --- a/drivers/staging/android/ion/ion.c +++ b/drivers/staging/android/ion/ion.c @@ -346,7 +346,7 @@ static int ion_dma_buf_begin_cpu_access(struct dma_buf *dmabuf, mutex_lock(&buffer->lock); list_for_each_entry(a, &buffer->attachments, list) { dma_sync_sg_for_cpu(a->dev, a->table->sgl, a->table->nents, - DMA_BIDIRECTIONAL); + direction); } mutex_unlock(&buffer->lock); @@ -368,7 +368,7 @@ static int ion_dma_buf_end_cpu_access(struct dma_buf *dmabuf, mutex_lock(&buffer->lock); list_for_each_entry(a, &buffer->attachments, list) { dma_sync_sg_for_device(a->dev, a->table->sgl, a->table->nents, - DMA_BIDIRECTIONAL); + direction); } mutex_unlock(&buffer->lock); From d1b8b2391c24751e44f618fcf86fb55d9a9247fd Mon Sep 17 00:00:00 2001 From: Cathy Avery Date: Tue, 19 Dec 2017 13:32:48 -0500 Subject: [PATCH 42/80] scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN which has zero good_bytes it must be assigned an error. Otherwise the I/O will be continuously requeued and will cause a deadlock in the case where disks are being hot added and removed. sd_probe_async will wait forever for its I/O to complete while holding scsi_sd_probe_domain. Also returning the default error of DID_TARGET_FAILURE causes multipath to not retry the I/O resulting in applications receiving I/O errors before a failover can occur. Signed-off-by: Cathy Avery Signed-off-by: Long Li Reviewed-by: Stephen Hemminger Signed-off-by: Martin K. Petersen --- drivers/scsi/storvsc_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 1b06cf0375dcdb..3b3d1d050cacaa 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -953,10 +953,11 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb, case TEST_UNIT_READY: break; default: - set_host_byte(scmnd, DID_TARGET_FAILURE); + set_host_byte(scmnd, DID_ERROR); } break; case SRB_STATUS_INVALID_LUN: + set_host_byte(scmnd, DID_NO_CONNECT); do_work = true; process_err_fn = storvsc_remove_lun; break; From 9b3fa47d4a76b1d606a396455f9bbeee083ef008 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 13 Dec 2017 15:21:22 -0800 Subject: [PATCH 43/80] kobject: fix suppressing modalias in uevents delivered over netlink The commit 4a336a23d619 ("kobject: copy env blob in one go") optimized constructing uevent data for delivery over netlink by using the raw environment buffer, instead of reconstructing it from individual environment pointers. Unfortunately in doing so it broke suppressing MODALIAS attribute for KOBJ_UNBIND events, as the code that suppressed this attribute only adjusted the environment pointers, but left the buffer itself alone. Let's fix it by making sure the offending attribute is obliterated form the buffer as well. Reported-by: Tariq Toukan Reported-by: Casey Leedom Fixes: 4a336a23d619 ("kobject: copy env blob in one go") Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- lib/kobject_uevent.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index c3e84edc47c965..2615074d3de5c6 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -346,7 +346,8 @@ static int kobject_uevent_net_broadcast(struct kobject *kobj, static void zap_modalias_env(struct kobj_uevent_env *env) { static const char modalias_prefix[] = "MODALIAS="; - int i; + size_t len; + int i, j; for (i = 0; i < env->envp_idx;) { if (strncmp(env->envp[i], modalias_prefix, @@ -355,11 +356,18 @@ static void zap_modalias_env(struct kobj_uevent_env *env) continue; } - if (i != env->envp_idx - 1) - memmove(&env->envp[i], &env->envp[i + 1], - sizeof(env->envp[i]) * env->envp_idx - 1); + len = strlen(env->envp[i]) + 1; + + if (i != env->envp_idx - 1) { + memmove(env->envp[i], env->envp[i + 1], + env->buflen - len); + + for (j = i; j < env->envp_idx - 1; j++) + env->envp[j] = env->envp[j + 1] - len; + } env->envp_idx--; + env->buflen -= len; } } From 966031f340185eddd05affcf72b740549f056348 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 20 Dec 2017 17:57:06 -0800 Subject: [PATCH 44/80] n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD) We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa Reported-by: syzkaller Cc: Jiri Slaby Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 427e0d5d8f135e..539b49adb6afd4 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1762,7 +1762,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) { struct n_tty_data *ldata = tty->disc_data; - if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) { + if (!old || (old->c_lflag ^ tty->termios.c_lflag) & (ICANON | EXTPROC)) { bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); ldata->line_start = ldata->read_tail; if (!L_ICANON(tty) || !read_cnt(ldata)) { @@ -2425,7 +2425,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, return put_user(tty_chars_in_buffer(tty), (int __user *) arg); case TIOCINQ: down_write(&tty->termios_rwsem); - if (L_ICANON(tty)) + if (L_ICANON(tty) && !L_EXTPROC(tty)) retval = inq_canon(ldata); else retval = read_cnt(ldata); From 8a42d3fc9dfccbf601c5f58f46dc3cdbc1a4b923 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Fri, 15 Dec 2017 13:42:04 +0000 Subject: [PATCH 45/80] nvmem: meson-mx-efuse: fix reading from an offset other than 0 meson_mx_efuse_read calculates the address internal to the eFuse based on the offset and the word size. This works fine with any given offset. However, the offset is also included when writing to the output buffer. This means that reading 4 bytes at offset 500 tries to write beyond the array allocated by the nvmem core as it wants to write the 4 bytes to "buffer address + offset (500)". This issue did not show up in the previous tests since no driver uses any value from the eFuse yet and reading the eFuse via sysfs simply reads the whole eFuse, starting at offset 0. Fix this by only including the offset in the internal address calculation. Fixes: 8caef1fa9176 ("nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs") Signed-off-by: Martin Blumenstingl Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/meson-mx-efuse.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c index a346b492355082..41d3a3c1104ec7 100644 --- a/drivers/nvmem/meson-mx-efuse.c +++ b/drivers/nvmem/meson-mx-efuse.c @@ -156,8 +156,8 @@ static int meson_mx_efuse_read(void *context, unsigned int offset, MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE); - for (i = offset; i < offset + bytes; i += efuse->config.word_size) { - addr = i / efuse->config.word_size; + for (i = 0; i < bytes; i += efuse->config.word_size) { + addr = (offset + i) / efuse->config.word_size; err = meson_mx_efuse_read_addr(efuse, addr, &tmp); if (err) From c6a36ad383559a60a249aa6016cebf3cb8b6c485 Mon Sep 17 00:00:00 2001 From: Max Schulze Date: Wed, 20 Dec 2017 20:47:44 +0100 Subject: [PATCH 46/80] USB: serial: ftdi_sio: add id for Airbus DS P8GR Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1aba9105b36967..fc68952c994a55 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1013,6 +1013,7 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) }, + { USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4faa09fe308ca0..8b4ecd2bd297b8 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -914,6 +914,12 @@ #define ICPDAS_I7561U_PID 0x0104 #define ICPDAS_I7563U_PID 0x0105 +/* + * Airbus Defence and Space + */ +#define AIRBUS_DS_VID 0x1e8e /* Vendor ID */ +#define AIRBUS_DS_P8GR 0x6001 /* Tetra P8GR */ + /* * RT Systems programming cables for various ham radios */ From 052f71e25a7ecd80a9567b291df8ea333d9a8565 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 21 Dec 2017 15:06:13 +0200 Subject: [PATCH 47/80] xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate Free the virt_device and its debugfs_private member together. When resuming from hibernate the .free_dev callback unconditionally freed the debugfs_private member, but could leave virt_device intact. This triggered a NULL pointer dereference after resume when usbmuxd sent a USBDEVFS_SETCONFIGURATION ioctl to a device, trying to add a endpoint debugfs entry to a already freed debugfs_private pointer. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Reported-by: Alexander Kappner Tested-by: Alexander Kappner Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2424d3020ca364..da6dbe3ebd8be9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3525,8 +3525,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_slot_ctx *slot_ctx; int i, ret; - xhci_debugfs_remove_slot(xhci, udev->slot_id); - #ifndef CONFIG_USB_DEFAULT_PERSIST /* * We called pm_runtime_get_noresume when the device was attached. @@ -3555,8 +3553,10 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) } ret = xhci_disable_slot(xhci, udev->slot_id); - if (ret) + if (ret) { + xhci_debugfs_remove_slot(xhci, udev->slot_id); xhci_free_virt_device(xhci, udev->slot_id); + } } int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) From dde634057da71a3505d7a6c0b77bb24ded6728c8 Mon Sep 17 00:00:00 2001 From: Alexander Kappner Date: Thu, 21 Dec 2017 15:06:14 +0200 Subject: [PATCH 48/80] xhci: Fix use-after-free in xhci debugfs Trying to read from debugfs after the system has resumed from hibernate causes a use-after-free and thus a protection fault. Steps to reproduce: Hibernate system, resume from hibernate, then run $ cat /sys/kernel/debug/usb/xhci/*/command-ring/enqueue [ 3902.765086] general protection fault: 0000 [#1] PREEMPT SMP ... [ 3902.765136] RIP: 0010:xhci_trb_virt_to_dma.part.50+0x5/0x30 ... [ 3902.765178] Call Trace: [ 3902.765188] xhci_ring_enqueue_show+0x1e/0x40 [ 3902.765197] seq_read+0xdb/0x3a0 [ 3902.765204] ? __handle_mm_fault+0x5fb/0x1210 [ 3902.765211] full_proxy_read+0x4a/0x70 [ 3902.765219] __vfs_read+0x23/0x120 [ 3902.765228] vfs_read+0x8e/0x130 [ 3902.765235] SyS_read+0x42/0x90 [ 3902.765242] do_syscall_64+0x6b/0x290 [ 3902.765251] entry_SYSCALL64_slow_path+0x25/0x25 The issue is caused by the xhci ring structures being reallocated when the system is resumed, but pointers to the old structures being retained in the debugfs files "private" field: The proposed patch fixes this issue by storing a pointer to the xhci_ring field in the xhci device structure in debugfs rather than directly storing a pointer to the xhci_ring. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Signed-off-by: Alexander Kappner Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-debugfs.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 4f7895dbcf880e..e26e685d8a578f 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -162,7 +162,7 @@ static void xhci_debugfs_extcap_regset(struct xhci_hcd *xhci, int cap_id, static int xhci_ring_enqueue_show(struct seq_file *s, void *unused) { dma_addr_t dma; - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; dma = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); seq_printf(s, "%pad\n", &dma); @@ -173,7 +173,7 @@ static int xhci_ring_enqueue_show(struct seq_file *s, void *unused) static int xhci_ring_dequeue_show(struct seq_file *s, void *unused) { dma_addr_t dma; - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; dma = xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); seq_printf(s, "%pad\n", &dma); @@ -183,7 +183,7 @@ static int xhci_ring_dequeue_show(struct seq_file *s, void *unused) static int xhci_ring_cycle_show(struct seq_file *s, void *unused) { - struct xhci_ring *ring = s->private; + struct xhci_ring *ring = *(struct xhci_ring **)s->private; seq_printf(s, "%d\n", ring->cycle_state); @@ -346,7 +346,7 @@ static void xhci_debugfs_create_files(struct xhci_hcd *xhci, } static struct dentry *xhci_debugfs_create_ring_dir(struct xhci_hcd *xhci, - struct xhci_ring *ring, + struct xhci_ring **ring, const char *name, struct dentry *parent) { @@ -387,7 +387,7 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index); epriv->root = xhci_debugfs_create_ring_dir(xhci, - dev->eps[ep_index].new_ring, + &dev->eps[ep_index].new_ring, epriv->name, spriv->root); spriv->eps[ep_index] = epriv; @@ -423,7 +423,7 @@ void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id) priv->dev = dev; dev->debugfs_private = priv; - xhci_debugfs_create_ring_dir(xhci, dev->eps[0].ring, + xhci_debugfs_create_ring_dir(xhci, &dev->eps[0].ring, "ep00", priv->root); xhci_debugfs_create_context_files(xhci, priv->root, slot_id); @@ -488,11 +488,11 @@ void xhci_debugfs_init(struct xhci_hcd *xhci) ARRAY_SIZE(xhci_extcap_dbc), "reg-ext-dbc"); - xhci_debugfs_create_ring_dir(xhci, xhci->cmd_ring, + xhci_debugfs_create_ring_dir(xhci, &xhci->cmd_ring, "command-ring", xhci->debugfs_root); - xhci_debugfs_create_ring_dir(xhci, xhci->event_ring, + xhci_debugfs_create_ring_dir(xhci, &xhci->event_ring, "event-ring", xhci->debugfs_root); From da99706689481717998d1d48edd389f339eea979 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 21 Dec 2017 15:06:15 +0200 Subject: [PATCH 49/80] usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Cc: Signed-off-by: Daniel Thompson Acked-by: Ard Biesheuvel Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7ef1274ef7f7f2..1aad89b8aba0b5 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -177,6 +177,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; xhci->quirks |= XHCI_BROKEN_STREAMS; } + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0014) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) xhci->quirks |= XHCI_RESET_ON_RESUME; From 76dc6c097d581ad8eeedf8e1a000423a3d742445 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Tue, 26 Dec 2017 15:08:53 +0100 Subject: [PATCH 50/80] cpu/hotplug: Move inline keyword at the beginning of declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix non-fatal warnings such as: kernel/cpu.c:95:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void inline cpuhp_lock_release(bool bringup) { } ^~~~~~ Signed-off-by: Mathieu Malaterre Signed-off-by: Thomas Gleixner Cc: Arnd Bergmann Cc: Sebastian Andrzej Siewior Cc: Peter Zijlstra Cc: "Paul E. McKenney" Link: https://lkml.kernel.org/r/20171226140855.16583-1-malat@debian.org --- kernel/cpu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index 41376c3ac93b06..3d002a6f216e1e 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -80,19 +80,19 @@ static struct lockdep_map cpuhp_state_down_map = STATIC_LOCKDEP_MAP_INIT("cpuhp_state-down", &cpuhp_state_down_map); -static void inline cpuhp_lock_acquire(bool bringup) +static inline void cpuhp_lock_acquire(bool bringup) { lock_map_acquire(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map); } -static void inline cpuhp_lock_release(bool bringup) +static inline void cpuhp_lock_release(bool bringup) { lock_map_release(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map); } #else -static void inline cpuhp_lock_acquire(bool bringup) { } -static void inline cpuhp_lock_release(bool bringup) { } +static inline void cpuhp_lock_acquire(bool bringup) { } +static inline void cpuhp_lock_release(bool bringup) { } #endif From 7ad1437d6ace0e450a6c1167720608ad660b191d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 27 Dec 2017 19:45:31 +0100 Subject: [PATCH 51/80] perf/x86/intel: Plug memory leak in intel_pmu_init() A recent commit introduced an extra merge_attr() call in the skylake branch, which causes a memory leak. Store the pointer to the extra allocated memory and free it at the end of the function. Fixes: a5df70c354c2 ("perf/x86: Only show format attributes when supported") Reported-by: Tommi Rantala Signed-off-by: Thomas Gleixner Cc: Andi Kleen --- arch/x86/events/intel/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 09c26a4f139c12..731153a4681e73 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3847,6 +3847,8 @@ static struct attribute *intel_pmu_attrs[] = { __init int intel_pmu_init(void) { + struct attribute **extra_attr = NULL; + struct attribute **to_free = NULL; union cpuid10_edx edx; union cpuid10_eax eax; union cpuid10_ebx ebx; @@ -3854,7 +3856,6 @@ __init int intel_pmu_init(void) unsigned int unused; struct extra_reg *er; int version, i; - struct attribute **extra_attr = NULL; char *name; if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { @@ -4294,6 +4295,7 @@ __init int intel_pmu_init(void) extra_attr = boot_cpu_has(X86_FEATURE_RTM) ? hsw_format_attr : nhm_format_attr; extra_attr = merge_attr(extra_attr, skl_format_attr); + to_free = extra_attr; x86_pmu.cpu_events = get_hsw_events_attrs(); intel_pmu_pebs_data_source_skl( boot_cpu_data.x86_model == INTEL_FAM6_SKYLAKE_X); @@ -4401,6 +4403,7 @@ __init int intel_pmu_init(void) pr_cont("full-width counters, "); } + kfree(to_free); return 0; } From 7ac139eaa6bbdb07c547b6916a808eab3897e0e3 Mon Sep 17 00:00:00 2001 From: rodrigosiqueira Date: Fri, 15 Dec 2017 11:15:33 -0200 Subject: [PATCH 52/80] x86: Remove unused parameter of prepare_switch_to Commit e37e43a497d5 ("x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y)") added prepare_switch_to with one extra parameter which is not used by the function, remove it. Signed-off-by: Rodrigo Siqueira Signed-off-by: Thomas Gleixner Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20171215131533.hp6kqebw45o7uvsb@smtp.gmail.com --- arch/x86/include/asm/switch_to.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h index 8c6bd6863db9d6..1008d462270980 100644 --- a/arch/x86/include/asm/switch_to.h +++ b/arch/x86/include/asm/switch_to.h @@ -16,8 +16,7 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, struct tss_struct *tss); /* This runs runs on the previous thread's stack. */ -static inline void prepare_switch_to(struct task_struct *prev, - struct task_struct *next) +static inline void prepare_switch_to(struct task_struct *next) { #ifdef CONFIG_VMAP_STACK /* @@ -70,7 +69,7 @@ struct fork_frame { #define switch_to(prev, next, last) \ do { \ - prepare_switch_to(prev, next); \ + prepare_switch_to(next); \ \ ((last) = __switch_to_asm((prev), (next))); \ } while (0) From ac461122c88a10b7d775de2f56467f097c9e627a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Dec 2017 11:48:50 -0800 Subject: [PATCH 53/80] x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR) Commit e802a51ede91 ("x86/idt: Consolidate IDT invalidation") cleaned up and unified the IDT invalidation that existed in a couple of places. It changed no actual real code. Despite not changing any actual real code, it _did_ change code generation: by implementing the common idt_invalidate() function in archx86/kernel/idt.c, it made the use of the function in arch/x86/kernel/machine_kexec_32.c be a real function call rather than an (accidental) inlining of the function. That, in turn, exposed two issues: - in load_segments(), we had incorrectly reset all the segment registers, which then made the stack canary load (which gcc does using offset of %gs) cause a trap. Instead of %gs pointing to the stack canary, it will be the normal zero-based kernel segment, and the stack canary load will take a page fault at address 0x14. - to make this even harder to debug, we had invalidated the GDT just before calling idt_invalidate(), which meant that the fault happened with an invalid GDT, which in turn causes a triple fault and immediate reboot. Fix this by (a) not reloading the special segments in load_segments(). We currently don't do any percpu accesses (which would require %fs on x86-32) in this area, but there's no reason to think that we might not want to do them, and like %gs, it's pointless to break it. (b) doing idt_invalidate() before invalidating the GDT, to keep things at least _slightly_ more debuggable for a bit longer. Without a IDT, traps will not work. Without a GDT, traps also will not work, but neither will any segment loads etc. So in a very real sense, the GDT is even more core than the IDT. Fixes: e802a51ede91 ("x86/idt: Consolidate IDT invalidation") Reported-and-tested-by: Alexandru Chirvasitu Signed-off-by: Linus Torvalds Signed-off-by: Thomas Gleixner Cc: Denys Vlasenko Cc: Peter Zijlstra Cc: Brian Gerst Cc: Steven Rostedt Cc: Borislav Petkov Cc: Andy Lutomirski Cc: Josh Poimboeuf Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.LFD.2.21.1712271143180.8572@i7.lan --- arch/x86/kernel/machine_kexec_32.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index 00bc751c861ce8..edfede76868870 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -48,8 +48,6 @@ static void load_segments(void) "\tmovl $"STR(__KERNEL_DS)",%%eax\n" "\tmovl %%eax,%%ds\n" "\tmovl %%eax,%%es\n" - "\tmovl %%eax,%%fs\n" - "\tmovl %%eax,%%gs\n" "\tmovl %%eax,%%ss\n" : : : "eax", "memory"); #undef STR @@ -232,8 +230,8 @@ void machine_kexec(struct kimage *image) * The gdt & idt are now invalid. * If you want to load them you must set up your own idt & gdt. */ - set_gdt(phys_to_virt(0), 0); idt_invalidate(phys_to_virt(0)); + set_gdt(phys_to_virt(0), 0); /* now call it */ image->start = relocate_kernel_ptr((unsigned long)image->head, From 59585b4be9ae4dc6506551709bdcd6f5210b8a01 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 25 Dec 2017 03:43:53 +0100 Subject: [PATCH 54/80] sparc64: repair calling incorrect hweight function from stubs Commit v4.12-rc4-1-g9289ea7f952b introduced a mistake that made the 64-bit hweight stub call the 16-bit hweight function. Fixes: 9289ea7f952b ("sparc64: Use indirect calls in hamming weight stubs") Signed-off-by: Jan Engelhardt Signed-off-by: David S. Miller --- arch/sparc/lib/hweight.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/lib/hweight.S b/arch/sparc/lib/hweight.S index e5547b22cd1832..0ddbbb03182232 100644 --- a/arch/sparc/lib/hweight.S +++ b/arch/sparc/lib/hweight.S @@ -44,8 +44,8 @@ EXPORT_SYMBOL(__arch_hweight32) .previous ENTRY(__arch_hweight64) - sethi %hi(__sw_hweight16), %g1 - jmpl %g1 + %lo(__sw_hweight16), %g0 + sethi %hi(__sw_hweight64), %g1 + jmpl %g1 + %lo(__sw_hweight64), %g0 nop ENDPROC(__arch_hweight64) EXPORT_SYMBOL(__arch_hweight64) From 39c3fd58952d7599d367c84c1330b785d91d6088 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 2 Dec 2017 18:11:04 +0100 Subject: [PATCH 55/80] kernel/irq: Extend lockdep class for request mutex The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn Signed-off-by: Thomas Gleixner Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch --- arch/powerpc/sysdev/fsl_msi.c | 4 ++- drivers/gpio/gpio-bcm-kona.c | 3 ++- drivers/gpio/gpio-brcmstb.c | 4 ++- drivers/gpio/gpio-tegra.c | 4 ++- drivers/gpio/gpiolib.c | 27 ++++++++++++------- drivers/irqchip/irq-renesas-intc-irqpin.c | 6 ++++- drivers/mfd/arizona-irq.c | 4 ++- drivers/pinctrl/pinctrl-single.c | 5 +++- include/linux/gpio/driver.h | 33 ++++++++++++++--------- include/linux/irqdesc.h | 9 ++++--- kernel/irq/generic-chip.c | 11 +++++--- 11 files changed, 75 insertions(+), 35 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 44cbf4c12ea137..df95102e732cb4 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -354,6 +354,7 @@ static int fsl_of_msi_remove(struct platform_device *ofdev) } static struct lock_class_key fsl_msi_irq_class; +static struct lock_class_key fsl_msi_irq_request_class; static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev, int offset, int irq_index) @@ -373,7 +374,8 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev, dev_err(&dev->dev, "No memory for MSI cascade data\n"); return -ENOMEM; } - irq_set_lockdep_class(virt_msir, &fsl_msi_irq_class); + irq_set_lockdep_class(virt_msir, &fsl_msi_irq_class, + &fsl_msi_irq_request_class); cascade_data->index = offset; cascade_data->msi_data = msi; cascade_data->virq = virt_msir; diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index dfcf56ee3c6181..76861a00bb92c4 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -522,6 +522,7 @@ static struct of_device_id const bcm_kona_gpio_of_match[] = { * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; +static struct lock_class_key gpio_request_class; static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq) @@ -531,7 +532,7 @@ static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, ret = irq_set_chip_data(irq, d->host_data); if (ret < 0) return ret; - irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class); irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq); irq_set_noprobe(irq); diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c index 545d43a587b7ef..5b24801bffefd2 100644 --- a/drivers/gpio/gpio-brcmstb.c +++ b/drivers/gpio/gpio-brcmstb.c @@ -327,6 +327,7 @@ static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank( * category than their parents, so it won't report false recursion. */ static struct lock_class_key brcmstb_gpio_irq_lock_class; +static struct lock_class_key brcmstb_gpio_irq_request_class; static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, @@ -346,7 +347,8 @@ static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, ret = irq_set_chip_data(irq, &bank->gc); if (ret < 0) return ret; - irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class); + irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, + &brcmstb_gpio_irq_lock_class); irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); irq_set_noprobe(irq); return 0; diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 8db47f67170875..02fa8fe2292a13 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -565,6 +565,7 @@ static const struct dev_pm_ops tegra_gpio_pm_ops = { * than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; +static struct lock_class_key gpio_request_class; static int tegra_gpio_probe(struct platform_device *pdev) { @@ -670,7 +671,8 @@ static int tegra_gpio_probe(struct platform_device *pdev) bank = &tgi->bank_info[GPIO_BANK(gpio)]; - irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class, + &gpio_request_class); irq_set_chip_data(irq, bank); irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq); } diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index aad84a6306c4e5..44332b793718af 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -73,7 +73,8 @@ LIST_HEAD(gpio_devices); static void gpiochip_free_hogs(struct gpio_chip *chip); static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, - struct lock_class_key *key); + struct lock_class_key *lock_key, + struct lock_class_key *request_key); static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip); static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip); static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip); @@ -1100,7 +1101,8 @@ static void gpiochip_setup_devs(void) } int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, - struct lock_class_key *key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { unsigned long flags; int status = 0; @@ -1246,7 +1248,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, if (status) goto err_remove_from_list; - status = gpiochip_add_irqchip(chip, key); + status = gpiochip_add_irqchip(chip, lock_key, request_key); if (status) goto err_remove_chip; @@ -1632,7 +1634,7 @@ int gpiochip_irq_map(struct irq_domain *d, unsigned int irq, * This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ - irq_set_lockdep_class(irq, chip->irq.lock_key); + irq_set_lockdep_class(irq, chip->irq.lock_key, chip->irq.request_key); irq_set_chip_and_handler(irq, chip->irq.chip, chip->irq.handler); /* Chips that use nested thread handlers have them marked */ if (chip->irq.threaded) @@ -1712,10 +1714,12 @@ static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset) /** * gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip * @gpiochip: the GPIO chip to add the IRQ chip to - * @lock_key: lockdep class + * @lock_key: lockdep class for IRQ lock + * @request_key: lockdep class for IRQ request */ static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, - struct lock_class_key *lock_key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { struct irq_chip *irqchip = gpiochip->irq.chip; const struct irq_domain_ops *ops; @@ -1753,6 +1757,7 @@ static int gpiochip_add_irqchip(struct gpio_chip *gpiochip, gpiochip->to_irq = gpiochip_to_irq; gpiochip->irq.default_type = type; gpiochip->irq.lock_key = lock_key; + gpiochip->irq.request_key = request_key; if (gpiochip->irq.domain_ops) ops = gpiochip->irq.domain_ops; @@ -1850,7 +1855,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE * to have the core avoid setting up any default type in the hardware. * @threaded: whether this irqchip uses a nested thread handler - * @lock_key: lockdep class + * @lock_key: lockdep class for IRQ lock + * @request_key: lockdep class for IRQ request * * This function closely associates a certain irqchip with a certain * gpiochip, providing an irq domain to translate the local IRQs to @@ -1872,7 +1878,8 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, irq_flow_handler_t handler, unsigned int type, bool threaded, - struct lock_class_key *lock_key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { struct device_node *of_node; @@ -1913,6 +1920,7 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, gpiochip->irq.default_type = type; gpiochip->to_irq = gpiochip_to_irq; gpiochip->irq.lock_key = lock_key; + gpiochip->irq.request_key = request_key; gpiochip->irq.domain = irq_domain_add_simple(of_node, gpiochip->ngpio, first_irq, &gpiochip_domain_ops, gpiochip); @@ -1940,7 +1948,8 @@ EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key); #else /* CONFIG_GPIOLIB_IRQCHIP */ static inline int gpiochip_add_irqchip(struct gpio_chip *gpiochip, - struct lock_class_key *key) + struct lock_class_key *lock_key, + struct lock_class_key *request_key) { return 0; } diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c index 06f29cf5018a15..cee59fe1321c44 100644 --- a/drivers/irqchip/irq-renesas-intc-irqpin.c +++ b/drivers/irqchip/irq-renesas-intc-irqpin.c @@ -342,6 +342,9 @@ static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id) */ static struct lock_class_key intc_irqpin_irq_lock_class; +/* And this is for the request mutex */ +static struct lock_class_key intc_irqpin_irq_request_class; + static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { @@ -352,7 +355,8 @@ static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, intc_irqpin_dbg(&p->irq[hw], "map"); irq_set_chip_data(virq, h->host_data); - irq_set_lockdep_class(virq, &intc_irqpin_irq_lock_class); + irq_set_lockdep_class(virq, &intc_irqpin_irq_lock_class, + &intc_irqpin_irq_request_class); irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); return 0; } diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index 09cf3699e35441..a307832d7e45fd 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -184,6 +184,7 @@ static struct irq_chip arizona_irq_chip = { }; static struct lock_class_key arizona_irq_lock_class; +static struct lock_class_key arizona_irq_request_class; static int arizona_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) @@ -191,7 +192,8 @@ static int arizona_irq_map(struct irq_domain *h, unsigned int virq, struct arizona *data = h->host_data; irq_set_chip_data(virq, data); - irq_set_lockdep_class(virq, &arizona_irq_lock_class); + irq_set_lockdep_class(virq, &arizona_irq_lock_class, + &arizona_irq_request_class); irq_set_chip_and_handler(virq, &arizona_irq_chip, handle_simple_irq); irq_set_nested_thread(virq, 1); irq_set_noprobe(virq); diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index e6cd8de793e2ae..3501491e5bfc8a 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -222,6 +222,9 @@ static enum pin_config_param pcs_bias[] = { */ static struct lock_class_key pcs_lock_class; +/* Class for the IRQ request mutex */ +static struct lock_class_key pcs_request_class; + /* * REVISIT: Reads and writes could eventually use regmap or something * generic. But at least on omaps, some mux registers are performance @@ -1486,7 +1489,7 @@ static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq, irq_set_chip_data(irq, pcs_soc); irq_set_chip_and_handler(irq, &pcs->chip, handle_level_irq); - irq_set_lockdep_class(irq, &pcs_lock_class); + irq_set_lockdep_class(irq, &pcs_lock_class, &pcs_request_class); irq_set_noprobe(irq); return 0; diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 55e672592fa93c..7258cd676df42c 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -66,9 +66,10 @@ struct gpio_irq_chip { /** * @lock_key: * - * Per GPIO IRQ chip lockdep class. + * Per GPIO IRQ chip lockdep classes. */ struct lock_class_key *lock_key; + struct lock_class_key *request_key; /** * @parent_handler: @@ -323,7 +324,8 @@ extern const char *gpiochip_is_requested(struct gpio_chip *chip, /* add/remove chips */ extern int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, - struct lock_class_key *lock_key); + struct lock_class_key *lock_key, + struct lock_class_key *request_key); /** * gpiochip_add_data() - register a gpio_chip @@ -350,11 +352,13 @@ extern int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, */ #ifdef CONFIG_LOCKDEP #define gpiochip_add_data(chip, data) ({ \ - static struct lock_class_key key; \ - gpiochip_add_data_with_key(chip, data, &key); \ + static struct lock_class_key lock_key; \ + static struct lock_class_key request_key; \ + gpiochip_add_data_with_key(chip, data, &lock_key, \ + &request_key); \ }) #else -#define gpiochip_add_data(chip, data) gpiochip_add_data_with_key(chip, data, NULL) +#define gpiochip_add_data(chip, data) gpiochip_add_data_with_key(chip, data, NULL, NULL) #endif static inline int gpiochip_add(struct gpio_chip *chip) @@ -429,7 +433,8 @@ int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, irq_flow_handler_t handler, unsigned int type, bool threaded, - struct lock_class_key *lock_key); + struct lock_class_key *lock_key, + struct lock_class_key *request_key); #ifdef CONFIG_LOCKDEP @@ -445,10 +450,12 @@ static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, irq_flow_handler_t handler, unsigned int type) { - static struct lock_class_key key; + static struct lock_class_key lock_key; + static struct lock_class_key request_key; return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, false, &key); + handler, type, false, + &lock_key, &request_key); } static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, @@ -458,10 +465,12 @@ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, unsigned int type) { - static struct lock_class_key key; + static struct lock_class_key lock_key; + static struct lock_class_key request_key; return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, true, &key); + handler, type, true, + &lock_key, &request_key); } #else static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, @@ -471,7 +480,7 @@ static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, unsigned int type) { return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, false, NULL); + handler, type, false, NULL, NULL); } static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, @@ -481,7 +490,7 @@ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, unsigned int type) { return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, - handler, type, true, NULL); + handler, type, true, NULL, NULL); } #endif /* CONFIG_LOCKDEP */ diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 39fb3700f7a92a..25b33b66453773 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -255,12 +255,15 @@ static inline bool irq_is_percpu_devid(unsigned int irq) } static inline void -irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class) +irq_set_lockdep_class(unsigned int irq, struct lock_class_key *lock_class, + struct lock_class_key *request_class) { struct irq_desc *desc = irq_to_desc(irq); - if (desc) - lockdep_set_class(&desc->lock, class); + if (desc) { + lockdep_set_class(&desc->lock, lock_class); + lockdep_set_class(&desc->request_mutex, request_class); + } } #ifdef CONFIG_IRQ_PREFLOW_FASTEOI diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c index c26c5bb6b491f7..508c03dfef254b 100644 --- a/kernel/irq/generic-chip.c +++ b/kernel/irq/generic-chip.c @@ -364,10 +364,11 @@ irq_get_domain_generic_chip(struct irq_domain *d, unsigned int hw_irq) EXPORT_SYMBOL_GPL(irq_get_domain_generic_chip); /* - * Separate lockdep class for interrupt chip which can nest irq_desc - * lock. + * Separate lockdep classes for interrupt chip which can nest irq_desc + * lock and request mutex. */ static struct lock_class_key irq_nested_lock_class; +static struct lock_class_key irq_nested_request_class; /* * irq_map_generic_chip - Map a generic chip for an irq domain @@ -409,7 +410,8 @@ int irq_map_generic_chip(struct irq_domain *d, unsigned int virq, set_bit(idx, &gc->installed); if (dgc->gc_flags & IRQ_GC_INIT_NESTED_LOCK) - irq_set_lockdep_class(virq, &irq_nested_lock_class); + irq_set_lockdep_class(virq, &irq_nested_lock_class, + &irq_nested_request_class); if (chip->irq_calc_mask) chip->irq_calc_mask(data); @@ -479,7 +481,8 @@ void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk, continue; if (flags & IRQ_GC_INIT_NESTED_LOCK) - irq_set_lockdep_class(i, &irq_nested_lock_class); + irq_set_lockdep_class(i, &irq_nested_lock_class, + &irq_nested_request_class); if (!(flags & IRQ_GC_NO_MASK)) { struct irq_data *d = irq_get_irq_data(i); From 11bca0a83f83f6093d816295668e74ef24595944 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 2 Dec 2017 09:13:04 -0800 Subject: [PATCH 56/80] genirq: Guard handle_bad_irq log messages An interrupt storm on a bad interrupt will cause the kernel log to be clogged. [ 60.089234] ->handle_irq(): ffffffffbe2f803f, [ 60.090455] 0xffffffffbf2af380 [ 60.090510] handle_bad_irq+0x0/0x2e5 [ 60.090522] ->irq_data.chip(): ffffffffbf2af380, [ 60.090553] IRQ_NOPROBE set [ 60.090584] ->handle_irq(): ffffffffbe2f803f, [ 60.090590] handle_bad_irq+0x0/0x2e5 [ 60.090596] ->irq_data.chip(): ffffffffbf2af380, [ 60.090602] 0xffffffffbf2af380 [ 60.090608] ->action(): (null) [ 60.090779] handle_bad_irq+0x0/0x2e5 This was seen when running an upstream kernel on Acer Chromebook R11. The system was unstable as result. Guard the log message with __printk_ratelimit to reduce the impact. This won't prevent the interrupt storm from happening, but at least the system remains stable. Signed-off-by: Guenter Roeck Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: Joe Perches Cc: Andy Shevchenko Cc: Mika Westerberg Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Link: https://lkml.kernel.org/r/1512234784-21038-1-git-send-email-linux@roeck-us.net --- kernel/irq/debug.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/irq/debug.h b/kernel/irq/debug.h index 17f05ef8f575f9..e4d3819a91cc7d 100644 --- a/kernel/irq/debug.h +++ b/kernel/irq/debug.h @@ -12,6 +12,11 @@ static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc) { + static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5); + + if (!__ratelimit(&ratelimit)) + return; + printk("irq %d, desc: %p, depth: %d, count: %d, unhandled: %d\n", irq, desc, desc->depth, desc->irq_count, desc->irqs_unhandled); printk("->handle_irq(): %p, ", desc->handle_irq); From 4fcab6693445cfb84f2b65868c58043535090e52 Mon Sep 17 00:00:00 2001 From: Dou Liyang Date: Mon, 4 Dec 2017 12:03:12 +0800 Subject: [PATCH 57/80] x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case There are two consumers of apic=: apic_set_verbosity() for setting the APIC debug level; parse_apic() for registering APIC driver by hand. X86-32 supports both of them, but sometimes, kernel issues a weird warning. eg: when kernel was booted up with 'apic=bigsmp' in command line, early_param would warn like that: ... [ 0.000000] APIC Verbosity level bigsmp not recognised use apic=verbose or apic=debug [ 0.000000] Malformed early option 'apic' ... Wrap the warning code in CONFIG_X86_64 case to avoid this. Signed-off-by: Dou Liyang Signed-off-by: Thomas Gleixner Cc: peterz@infradead.org Cc: rdunlap@infradead.org Cc: corbet@lwn.net Link: https://lkml.kernel.org/r/20171204040313.24824-1-douly.fnst@cn.fujitsu.com --- arch/x86/kernel/apic/apic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 6e272f3ea984a2..880441f2414610 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2626,11 +2626,13 @@ static int __init apic_set_verbosity(char *arg) apic_verbosity = APIC_DEBUG; else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; +#ifdef CONFIG_X86_64 else { pr_warning("APIC Verbosity level %s not recognised" " use apic=verbose or apic=debug\n", arg); return -EINVAL; } +#endif return 0; } From 64e05d118e357bb52a084b609436acf292ce7944 Mon Sep 17 00:00:00 2001 From: Dou Liyang Date: Mon, 4 Dec 2017 12:03:13 +0800 Subject: [PATCH 58/80] x86/apic: Update the 'apic=' description of setting APIC driver There are two consumers of apic=: the APIC debug level and the low level generic architecture code, but Linux just documented the first one. Append the second description. Signed-off-by: Dou Liyang Signed-off-by: Thomas Gleixner Cc: peterz@infradead.org Cc: rdunlap@infradead.org Cc: corbet@lwn.net Link: https://lkml.kernel.org/r/20171204040313.24824-2-douly.fnst@cn.fujitsu.com --- Documentation/admin-guide/kernel-parameters.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b74e13312fdc29..852fb11dd2c953 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -328,11 +328,15 @@ not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,X86-32] Advanced Programmable Interrupt Controller + apic= [APIC,X86] Advanced Programmable Interrupt Controller Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output when initialising the APIC and IO-APIC components. + For X86-32, this can also be used to specify an APIC + driver name. + Format: apic=driver_name + Examples: apic=bigsmp apic_extnmi= [APIC,X86] External NMI delivery setting Format: { bsp (default) | all | none } From e7e83dd3ff1dd2f9e60213f6eedc7e5b08192062 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Tue, 26 Dec 2017 15:27:20 -0600 Subject: [PATCH 59/80] objtool: Fix Clang enum conversion warning Fix the following Clang enum conversion warning: arch/x86/decode.c:141:20: error: implicit conversion from enumeration type 'enum op_src_type' to different enumeration type 'enum op_dest_type' [-Werror,-Wenum-conversion] op->dest.type = OP_SRC_REG; ~ ^~~~~~~~~~ It just happened to work before because OP_SRC_REG and OP_DEST_REG have the same value. Signed-off-by: Lukas Bulwahn Signed-off-by: Josh Poimboeuf Reviewed-by: Nicholas Mc Guire Reviewed-by: Nick Desaulniers Cc: Jiri Slaby Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0") Link: http://lkml.kernel.org/r/b4156c5738bae781c392e7a3691aed4514ebbdf2.1514323568.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/arch/x86/decode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c index 8acfc47af70efd..540a209b78ab3c 100644 --- a/tools/objtool/arch/x86/decode.c +++ b/tools/objtool/arch/x86/decode.c @@ -138,7 +138,7 @@ int arch_decode_instruction(struct elf *elf, struct section *sec, *type = INSN_STACK; op->src.type = OP_SRC_ADD; op->src.reg = op_to_cfi_reg[modrm_reg][rex_r]; - op->dest.type = OP_SRC_REG; + op->dest.type = OP_DEST_REG; op->dest.reg = CFI_SP; } break; From a31e58e129f73ab5b04016330b13ed51fde7a961 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 28 Dec 2017 11:33:33 +0100 Subject: [PATCH 60/80] x86/apic: Switch all APICs to Fixed delivery mode Some of the APIC incarnations are operating in lowest priority delivery mode. This worked as long as the vector management code allocated the same vector on all possible CPUs for each interrupt. Lowest priority delivery mode does not necessarily respect the affinity setting and may redirect to some other online CPU. This was documented somewhere in the old code and the conversion to single target delivery missed to update the delivery mode of the affected APIC drivers which results in spurious interrupts on some of the affected CPU/Chipset combinations. Switch the APIC drivers over to Fixed delivery mode and remove all leftovers of lowest priority delivery mode. Switching to Fixed delivery mode is not a problem on these CPUs because the kernel already uses Fixed delivery mode for IPIs. The reason for this is that th SDM explicitely forbids lowest prio mode for IPIs. The reason is obvious: If the irq routing does not honor destination targets in lowest prio mode then an IPI targeted at CPU1 might end up on CPU0, which would be a fatal problem in many cases. As a consequence of this change, the apic::irq_delivery_mode field is now pointless, but this needs to be cleaned up in a separate patch. Fixes: fdba46ffb4c2 ("x86/apic: Get rid of multi CPU affinity") Reported-by: vcaputo@pengaru.com Signed-off-by: Thomas Gleixner Tested-by: vcaputo@pengaru.com Cc: Pavel Machek Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712281140440.1688@nanos --- arch/x86/kernel/apic/apic_flat_64.c | 2 +- arch/x86/kernel/apic/apic_noop.c | 2 +- arch/x86/kernel/apic/msi.c | 8 ++------ arch/x86/kernel/apic/probe_32.c | 2 +- arch/x86/kernel/apic/x2apic_cluster.c | 2 +- drivers/pci/host/pci-hyperv.c | 8 ++------ 6 files changed, 8 insertions(+), 16 deletions(-) diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index aa85690e9b6416..25a87028cb3fe9 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -151,7 +151,7 @@ static struct apic apic_flat __ro_after_init = { .apic_id_valid = default_apic_id_valid, .apic_id_registered = flat_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, .irq_dest_mode = 1, /* logical */ .disable_esr = 0, diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index 7b659c4480c91a..5078b5ce63a7aa 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -110,7 +110,7 @@ struct apic apic_noop __ro_after_init = { .apic_id_valid = default_apic_id_valid, .apic_id_registered = noop_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, /* logical delivery broadcast to all CPUs: */ .irq_dest_mode = 1, diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c index 9b18be76442236..ce503c99f5c4cd 100644 --- a/arch/x86/kernel/apic/msi.c +++ b/arch/x86/kernel/apic/msi.c @@ -39,17 +39,13 @@ static void irq_msi_compose_msg(struct irq_data *data, struct msi_msg *msg) ((apic->irq_dest_mode == 0) ? MSI_ADDR_DEST_MODE_PHYSICAL : MSI_ADDR_DEST_MODE_LOGICAL) | - ((apic->irq_delivery_mode != dest_LowestPrio) ? - MSI_ADDR_REDIRECTION_CPU : - MSI_ADDR_REDIRECTION_LOWPRI) | + MSI_ADDR_REDIRECTION_CPU | MSI_ADDR_DEST_ID(cfg->dest_apicid); msg->data = MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | - ((apic->irq_delivery_mode != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED : - MSI_DATA_DELIVERY_LOWPRI) | + MSI_DATA_DELIVERY_FIXED | MSI_DATA_VECTOR(cfg->vector); } diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index fa22017de80650..02e8acb134f856 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -105,7 +105,7 @@ static struct apic apic_default __ro_after_init = { .apic_id_valid = default_apic_id_valid, .apic_id_registered = default_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, /* logical delivery broadcast to all CPUs: */ .irq_dest_mode = 1, diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index 622f13ca8a943c..8b04234e010b26 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -184,7 +184,7 @@ static struct apic apic_x2apic_cluster __ro_after_init = { .apic_id_valid = x2apic_apic_id_valid, .apic_id_registered = x2apic_apic_id_registered, - .irq_delivery_mode = dest_LowestPrio, + .irq_delivery_mode = dest_Fixed, .irq_dest_mode = 1, /* logical */ .disable_esr = 0, diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c index 0fe3ea164ee533..e7d94473aedd0b 100644 --- a/drivers/pci/host/pci-hyperv.c +++ b/drivers/pci/host/pci-hyperv.c @@ -985,9 +985,7 @@ static u32 hv_compose_msi_req_v1( int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; int_pkt->int_desc.vector_count = 1; - int_pkt->int_desc.delivery_mode = - (apic->irq_delivery_mode == dest_LowestPrio) ? - dest_LowestPrio : dest_Fixed; + int_pkt->int_desc.delivery_mode = dest_Fixed; /* * Create MSI w/ dummy vCPU set, overwritten by subsequent retarget in @@ -1008,9 +1006,7 @@ static u32 hv_compose_msi_req_v2( int_pkt->wslot.slot = slot; int_pkt->int_desc.vector = vector; int_pkt->int_desc.vector_count = 1; - int_pkt->int_desc.delivery_mode = - (apic->irq_delivery_mode == dest_LowestPrio) ? - dest_LowestPrio : dest_Fixed; + int_pkt->int_desc.delivery_mode = dest_Fixed; /* * Create MSI w/ dummy vCPU set targeting just one vCPU, overwritten From 8880c13734af33635118a1e9567dadc7f9ddb7a8 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 16:29:15 +0100 Subject: [PATCH 61/80] gpio: brcmstb: Make really use of the new lockdep class The recent extension of irq_set_lockdep_class() with a second argument added the new lockdep class to the mrcmstb driver, but used the already existing lockdep class as second argument, which leaves the new lockdep class defined but unused. Use the new lockdep class as that's what the change intended to do. Fixes: 39c3fd58952d ("kernel/irq: Extend lockdep class for request mutex") Reported-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: Andrew Lunn Cc: linus.walleij@linaro.org --- drivers/gpio/gpio-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c index 5b24801bffefd2..bb4f8cf18bd9f6 100644 --- a/drivers/gpio/gpio-brcmstb.c +++ b/drivers/gpio/gpio-brcmstb.c @@ -348,7 +348,7 @@ static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, if (ret < 0) return ret; irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, - &brcmstb_gpio_irq_lock_class); + &brcmstb_gpio_irq_request_class); irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); irq_set_noprobe(irq); return 0; From da5dd9e854d2edd6b02ebfe28583052f922104da Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 10:42:10 +0100 Subject: [PATCH 62/80] genirq/msi: Handle reactivation only on success When analyzing the fallout of the x86 vector allocation rework it turned out that the error handling in msi_domain_alloc_irqs() is broken. If MSI_FLAG_MUST_REACTIVATE is set for a MSI domain then it clears the activation flag for a successfully initialized msi descriptor. If a subsequent initialization fails then the error handling code path does not deactivate the interrupt because the activation flag got cleared. Move the clearing of the activation flag outside of the initialization loop so that an eventual failure can be cleaned up correctly. Fixes: 22d0b12f3560 ("genirq/irqdomain: Add force reactivation flag to irq domains") Signed-off-by: Thomas Gleixner Tested-by: Alexandru Chirvasitu Tested-by: Andy Shevchenko Cc: Dou Liyang Cc: Pavel Machek Cc: Maciej W. Rozycki Cc: Mikael Pettersson Cc: Josh Poulson Cc: Mihai Costache Cc: Stephen Hemminger Cc: Marc Zyngier Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang Cc: Dexuan Cui Cc: Simon Xiao Cc: Saeed Mahameed Cc: Jork Loeser Cc: Bjorn Helgaas Cc: devel@linuxdriverproject.org Cc: KY Srinivasan Cc: Alan Cox Cc: Sakari Ailus , Cc: linux-media@vger.kernel.org --- kernel/irq/msi.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c index edb987b2c58dc1..9ba95433117153 100644 --- a/kernel/irq/msi.c +++ b/kernel/irq/msi.c @@ -339,6 +339,13 @@ int msi_domain_populate_irqs(struct irq_domain *domain, struct device *dev, return ret; } +static bool msi_check_reservation_mode(struct msi_domain_info *info) +{ + if (!(info->flags & MSI_FLAG_MUST_REACTIVATE)) + return false; + return true; +} + /** * msi_domain_alloc_irqs - Allocate interrupts from a MSI interrupt domain * @domain: The domain to allocate from @@ -353,9 +360,11 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev, { struct msi_domain_info *info = domain->host_data; struct msi_domain_ops *ops = info->ops; - msi_alloc_info_t arg; + struct irq_data *irq_data; struct msi_desc *desc; + msi_alloc_info_t arg; int i, ret, virq; + bool can_reserve; ret = msi_domain_prepare_irqs(domain, dev, nvec, &arg); if (ret) @@ -385,6 +394,8 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev, if (ops->msi_finish) ops->msi_finish(&arg, 0); + can_reserve = msi_check_reservation_mode(info); + for_each_msi_entry(desc, dev) { virq = desc->irq; if (desc->nvec_used == 1) @@ -397,15 +408,23 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev, * the MSI entries before the PCI layer enables MSI in the * card. Otherwise the card latches a random msi message. */ - if (info->flags & MSI_FLAG_ACTIVATE_EARLY) { - struct irq_data *irq_data; + if (!(info->flags & MSI_FLAG_ACTIVATE_EARLY)) + continue; + irq_data = irq_domain_get_irq_data(domain, desc->irq); + ret = irq_domain_activate_irq(irq_data, true); + if (ret) + goto cleanup; + } + + /* + * If these interrupts use reservation mode, clear the activated bit + * so request_irq() will assign the final vector. + */ + if (can_reserve) { + for_each_msi_entry(desc, dev) { irq_data = irq_domain_get_irq_data(domain, desc->irq); - ret = irq_domain_activate_irq(irq_data, true); - if (ret) - goto cleanup; - if (info->flags & MSI_FLAG_MUST_REACTIVATE) - irqd_clr_activated(irq_data); + irqd_clr_activated(irq_data); } } return 0; From 69790ba92b8d67eaee5e50b30a5b696d40664caf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 16:44:34 +0100 Subject: [PATCH 63/80] genirq: Introduce IRQD_CAN_RESERVE flag Add a new flag to mark interrupts which can use reservation mode. This is going to be used in subsequent patches to disable reservation mode for a certain class of MSI devices. Signed-off-by: Thomas Gleixner Tested-by: Alexandru Chirvasitu Tested-by: Andy Shevchenko Cc: Dou Liyang Cc: Pavel Machek Cc: Maciej W. Rozycki Cc: Mikael Pettersson Cc: Josh Poulson Cc: Mihai Costache Cc: Stephen Hemminger Cc: Marc Zyngier Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang Cc: Dexuan Cui Cc: Simon Xiao Cc: Saeed Mahameed Cc: Jork Loeser Cc: Bjorn Helgaas Cc: devel@linuxdriverproject.org Cc: KY Srinivasan Cc: Alan Cox Cc: Sakari Ailus , Cc: linux-media@vger.kernel.org --- include/linux/irq.h | 17 +++++++++++++++++ kernel/irq/debugfs.c | 1 + 2 files changed, 18 insertions(+) diff --git a/include/linux/irq.h b/include/linux/irq.h index e140f69163b693..a0231e96a57834 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -212,6 +212,7 @@ struct irq_data { * mask. Applies only to affinity managed irqs. * IRQD_SINGLE_TARGET - IRQ allows only a single affinity target * IRQD_DEFAULT_TRIGGER_SET - Expected trigger already been set + * IRQD_CAN_RESERVE - Can use reservation mode */ enum { IRQD_TRIGGER_MASK = 0xf, @@ -233,6 +234,7 @@ enum { IRQD_MANAGED_SHUTDOWN = (1 << 23), IRQD_SINGLE_TARGET = (1 << 24), IRQD_DEFAULT_TRIGGER_SET = (1 << 25), + IRQD_CAN_RESERVE = (1 << 26), }; #define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors) @@ -377,6 +379,21 @@ static inline bool irqd_is_managed_and_shutdown(struct irq_data *d) return __irqd_to_state(d) & IRQD_MANAGED_SHUTDOWN; } +static inline void irqd_set_can_reserve(struct irq_data *d) +{ + __irqd_to_state(d) |= IRQD_CAN_RESERVE; +} + +static inline void irqd_clr_can_reserve(struct irq_data *d) +{ + __irqd_to_state(d) &= ~IRQD_CAN_RESERVE; +} + +static inline bool irqd_can_reserve(struct irq_data *d) +{ + return __irqd_to_state(d) & IRQD_CAN_RESERVE; +} + #undef __irqd_to_state static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) diff --git a/kernel/irq/debugfs.c b/kernel/irq/debugfs.c index 7f608ac3965379..acfaaef8672ad2 100644 --- a/kernel/irq/debugfs.c +++ b/kernel/irq/debugfs.c @@ -113,6 +113,7 @@ static const struct irq_bit_descr irqdata_states[] = { BIT_MASK_DESCR(IRQD_SETAFFINITY_PENDING), BIT_MASK_DESCR(IRQD_AFFINITY_MANAGED), BIT_MASK_DESCR(IRQD_MANAGED_SHUTDOWN), + BIT_MASK_DESCR(IRQD_CAN_RESERVE), BIT_MASK_DESCR(IRQD_FORWARDED_TO_VCPU), From 945f50a591783ac6e9bd59694f34d1ba03b778a7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 16:57:00 +0100 Subject: [PATCH 64/80] x86/vector: Use IRQD_CAN_RESERVE flag Set the new CAN_RESERVE flag when the initial reservation for an interrupt happens. The flag is used in a subsequent patch to disable reservation mode for a certain class of MSI devices. Signed-off-by: Thomas Gleixner Tested-by: Alexandru Chirvasitu Tested-by: Andy Shevchenko Cc: Dou Liyang Cc: Pavel Machek Cc: Maciej W. Rozycki Cc: Mikael Pettersson Cc: Josh Poulson Cc: Mihai Costache Cc: Stephen Hemminger Cc: Marc Zyngier Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang Cc: Dexuan Cui Cc: Simon Xiao Cc: Saeed Mahameed Cc: Jork Loeser Cc: Bjorn Helgaas Cc: devel@linuxdriverproject.org Cc: KY Srinivasan Cc: Alan Cox Cc: Sakari Ailus , Cc: linux-media@vger.kernel.org --- arch/x86/kernel/apic/vector.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index 750449152b04b4..1e969dba047619 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -184,6 +184,7 @@ static void reserve_irq_vector_locked(struct irq_data *irqd) irq_matrix_reserve(vector_matrix); apicd->can_reserve = true; apicd->has_reserved = true; + irqd_set_can_reserve(irqd); trace_vector_reserve(irqd->irq, 0); vector_assign_managed_shutdown(irqd); } @@ -478,6 +479,7 @@ static bool vector_configure_legacy(unsigned int virq, struct irq_data *irqd, } else { /* Release the vector */ apicd->can_reserve = true; + irqd_set_can_reserve(irqd); clear_irq_vector(irqd); realloc = true; } From 702cb0a02813299d6911b775c637906ae21b737d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 16:59:06 +0100 Subject: [PATCH 65/80] genirq/irqdomain: Rename early argument of irq_domain_activate_irq() The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner Cc: Alexandru Chirvasitu Cc: Andy Shevchenko Cc: Dou Liyang Cc: Pavel Machek Cc: Maciej W. Rozycki Cc: Mikael Pettersson Cc: Josh Poulson Cc: Mihai Costache Cc: Stephen Hemminger Cc: Marc Zyngier Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang Cc: Dexuan Cui Cc: Simon Xiao Cc: Saeed Mahameed Cc: Jork Loeser Cc: Bjorn Helgaas Cc: devel@linuxdriverproject.org Cc: KY Srinivasan Cc: Alan Cox Cc: Sakari Ailus , Cc: linux-media@vger.kernel.org --- arch/x86/include/asm/irqdomain.h | 2 +- arch/x86/include/asm/trace/irq_vectors.h | 16 ++++++++-------- arch/x86/kernel/apic/io_apic.c | 2 +- arch/x86/kernel/apic/vector.c | 6 +++--- arch/x86/platform/uv/uv_irq.c | 2 +- drivers/gpio/gpio-xgene-sb.c | 2 +- drivers/iommu/amd_iommu.c | 2 +- drivers/iommu/intel_irq_remapping.c | 2 +- drivers/irqchip/irq-gic-v3-its.c | 4 ++-- drivers/pinctrl/stm32/pinctrl-stm32.c | 2 +- include/linux/irqdomain.h | 2 +- kernel/irq/internals.h | 2 +- kernel/irq/irqdomain.c | 13 +++++++------ 13 files changed, 29 insertions(+), 28 deletions(-) diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h index 139feef467f7e2..c066ffae222b76 100644 --- a/arch/x86/include/asm/irqdomain.h +++ b/arch/x86/include/asm/irqdomain.h @@ -44,7 +44,7 @@ extern int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs); extern int mp_irqdomain_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early); + struct irq_data *irq_data, bool reserve); extern void mp_irqdomain_deactivate(struct irq_domain *domain, struct irq_data *irq_data); extern int mp_irqdomain_ioapic_idx(struct irq_domain *domain); diff --git a/arch/x86/include/asm/trace/irq_vectors.h b/arch/x86/include/asm/trace/irq_vectors.h index 84b9ec0c1bc086..22647a642e98c4 100644 --- a/arch/x86/include/asm/trace/irq_vectors.h +++ b/arch/x86/include/asm/trace/irq_vectors.h @@ -283,34 +283,34 @@ TRACE_EVENT(vector_alloc_managed, DECLARE_EVENT_CLASS(vector_activate, TP_PROTO(unsigned int irq, bool is_managed, bool can_reserve, - bool early), + bool reserve), - TP_ARGS(irq, is_managed, can_reserve, early), + TP_ARGS(irq, is_managed, can_reserve, reserve), TP_STRUCT__entry( __field( unsigned int, irq ) __field( bool, is_managed ) __field( bool, can_reserve ) - __field( bool, early ) + __field( bool, reserve ) ), TP_fast_assign( __entry->irq = irq; __entry->is_managed = is_managed; __entry->can_reserve = can_reserve; - __entry->early = early; + __entry->reserve = reserve; ), - TP_printk("irq=%u is_managed=%d can_reserve=%d early=%d", + TP_printk("irq=%u is_managed=%d can_reserve=%d reserve=%d", __entry->irq, __entry->is_managed, __entry->can_reserve, - __entry->early) + __entry->reserve) ); #define DEFINE_IRQ_VECTOR_ACTIVATE_EVENT(name) \ DEFINE_EVENT_FN(vector_activate, name, \ TP_PROTO(unsigned int irq, bool is_managed, \ - bool can_reserve, bool early), \ - TP_ARGS(irq, is_managed, can_reserve, early), NULL, NULL); \ + bool can_reserve, bool reserve), \ + TP_ARGS(irq, is_managed, can_reserve, reserve), NULL, NULL); \ DEFINE_IRQ_VECTOR_ACTIVATE_EVENT(vector_activate); DEFINE_IRQ_VECTOR_ACTIVATE_EVENT(vector_deactivate); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 201579dc52428e..8a79634214600a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2988,7 +2988,7 @@ void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, } int mp_irqdomain_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { unsigned long flags; diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index 1e969dba047619..52c85c8147e94c 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -399,21 +399,21 @@ static int activate_managed(struct irq_data *irqd) } static int x86_vector_activate(struct irq_domain *dom, struct irq_data *irqd, - bool early) + bool reserve) { struct apic_chip_data *apicd = apic_chip_data(irqd); unsigned long flags; int ret = 0; trace_vector_activate(irqd->irq, apicd->is_managed, - apicd->can_reserve, early); + apicd->can_reserve, reserve); /* Nothing to do for fixed assigned vectors */ if (!apicd->can_reserve && !apicd->is_managed) return 0; raw_spin_lock_irqsave(&vector_lock, flags); - if (early || irqd_is_managed_and_shutdown(irqd)) + if (reserve || irqd_is_managed_and_shutdown(irqd)) vector_assign_managed_shutdown(irqd); else if (apicd->is_managed) ret = activate_managed(irqd); diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index 5f6fd860820a3c..e4cb9f4cde8ae2 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -128,7 +128,7 @@ static void uv_domain_free(struct irq_domain *domain, unsigned int virq, * on the specified blade to allow the sending of MSIs to the specified CPU. */ static int uv_domain_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data); return 0; diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c index 2313af82fad3d4..acd59113e08b9c 100644 --- a/drivers/gpio/gpio-xgene-sb.c +++ b/drivers/gpio/gpio-xgene-sb.c @@ -139,7 +139,7 @@ static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio) static int xgene_gpio_sb_domain_activate(struct irq_domain *d, struct irq_data *irq_data, - bool early) + bool reserve) { struct xgene_gpio_sb *priv = d->host_data; u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq); diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 7d5eb004091d1d..97baf88d950589 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -4184,7 +4184,7 @@ static void amd_ir_update_irte(struct irq_data *irqd, struct amd_iommu *iommu, struct irq_cfg *cfg); static int irq_remapping_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { struct amd_ir_data *data = irq_data->chip_data; struct irq_2_irte *irte_info = &data->irq_2_irte; diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index 76a193c7fcfc69..66f69af2c2191f 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -1397,7 +1397,7 @@ static void intel_irq_remapping_free(struct irq_domain *domain, } static int intel_irq_remapping_activate(struct irq_domain *domain, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { intel_ir_reconfigure_irte(irq_data, true); return 0; diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 4039e64cd34211..06f025fd5726f6 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -2303,7 +2303,7 @@ static int its_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, } static int its_irq_domain_activate(struct irq_domain *domain, - struct irq_data *d, bool early) + struct irq_data *d, bool reserve) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); u32 event = its_get_event_id(d); @@ -2818,7 +2818,7 @@ static int its_vpe_irq_domain_alloc(struct irq_domain *domain, unsigned int virq } static int its_vpe_irq_domain_activate(struct irq_domain *domain, - struct irq_data *d, bool early) + struct irq_data *d, bool reserve) { struct its_vpe *vpe = irq_data_get_irq_chip_data(d); struct its_node *its; diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index a276c61be217b4..e62ab087bfd8af 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -290,7 +290,7 @@ static int stm32_gpio_domain_translate(struct irq_domain *d, } static int stm32_gpio_domain_activate(struct irq_domain *d, - struct irq_data *irq_data, bool early) + struct irq_data *irq_data, bool reserve) { struct stm32_gpio_bank *bank = d->host_data; struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent); diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index a34355d195463f..48c7e86bb55667 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -113,7 +113,7 @@ struct irq_domain_ops { unsigned int nr_irqs, void *arg); void (*free)(struct irq_domain *d, unsigned int virq, unsigned int nr_irqs); - int (*activate)(struct irq_domain *d, struct irq_data *irqd, bool early); + int (*activate)(struct irq_domain *d, struct irq_data *irqd, bool reserve); void (*deactivate)(struct irq_domain *d, struct irq_data *irq_data); int (*translate)(struct irq_domain *d, struct irq_fwspec *fwspec, unsigned long *out_hwirq, unsigned int *out_type); diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index 07d08ca701ec46..ab19371eab9b8e 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -440,7 +440,7 @@ static inline bool irq_fixup_move_pending(struct irq_desc *desc, bool fclear) #endif /* !CONFIG_GENERIC_PENDING_IRQ */ #if !defined(CONFIG_IRQ_DOMAIN) || !defined(CONFIG_IRQ_DOMAIN_HIERARCHY) -static inline int irq_domain_activate_irq(struct irq_data *data, bool early) +static inline int irq_domain_activate_irq(struct irq_data *data, bool reserve) { irqd_set_activated(data); return 0; diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 4f4f60015e8ab4..62068ad46930dd 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -1693,7 +1693,7 @@ static void __irq_domain_deactivate_irq(struct irq_data *irq_data) } } -static int __irq_domain_activate_irq(struct irq_data *irqd, bool early) +static int __irq_domain_activate_irq(struct irq_data *irqd, bool reserve) { int ret = 0; @@ -1702,9 +1702,9 @@ static int __irq_domain_activate_irq(struct irq_data *irqd, bool early) if (irqd->parent_data) ret = __irq_domain_activate_irq(irqd->parent_data, - early); + reserve); if (!ret && domain->ops->activate) { - ret = domain->ops->activate(domain, irqd, early); + ret = domain->ops->activate(domain, irqd, reserve); /* Rollback in case of error */ if (ret && irqd->parent_data) __irq_domain_deactivate_irq(irqd->parent_data); @@ -1716,17 +1716,18 @@ static int __irq_domain_activate_irq(struct irq_data *irqd, bool early) /** * irq_domain_activate_irq - Call domain_ops->activate recursively to activate * interrupt - * @irq_data: outermost irq_data associated with interrupt + * @irq_data: Outermost irq_data associated with interrupt + * @reserve: If set only reserve an interrupt vector instead of assigning one * * This is the second step to call domain_ops->activate to program interrupt * controllers, so the interrupt could actually get delivered. */ -int irq_domain_activate_irq(struct irq_data *irq_data, bool early) +int irq_domain_activate_irq(struct irq_data *irq_data, bool reserve) { int ret = 0; if (!irqd_is_activated(irq_data)) - ret = __irq_domain_activate_irq(irq_data, early); + ret = __irq_domain_activate_irq(irq_data, reserve); if (!ret) irqd_set_activated(irq_data); return ret; From bc976233a872c0f20f018fb1e89264a541584e25 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Dec 2017 10:47:22 +0100 Subject: [PATCH 66/80] genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI The new reservation mode for interrupts assigns a dummy vector when the interrupt is allocated and assigns a real vector when the interrupt is requested. The reservation mode prevents vector pressure when devices with a large amount of queues/interrupts are initialized, but only a minimal subset of those queues/interrupts is actually used. This mode has an issue with MSI interrupts which cannot be masked. If the driver is not careful or the hardware emits an interrupt before the device irq is requestd by the driver then the interrupt ends up on the dummy vector as a spurious interrupt which can cause malfunction of the device or in the worst case a lockup of the machine. Change the logic for the reservation mode so that the early activation of MSI interrupts checks whether: - the device is a PCI/MSI device - the reservation mode of the underlying irqdomain is activated - PCI/MSI masking is globally enabled - the PCI/MSI device uses either MSI-X, which supports masking, or MSI with the maskbit supported. If one of those conditions is false, then clear the reservation mode flag in the irq data of the interrupt and invoke irq_domain_activate_irq() with the reserve argument cleared. In the x86 vector code, clear the can_reserve flag in the vector allocation data so a subsequent free_irq() won't create the same situation again. The interrupt stays assigned to a real vector until pci_disable_msi() is invoked and all allocations are undone. Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode") Reported-by: Alexandru Chirvasitu Reported-by: Andy Shevchenko Signed-off-by: Thomas Gleixner Tested-by: Alexandru Chirvasitu Tested-by: Andy Shevchenko Cc: Dou Liyang Cc: Pavel Machek Cc: Maciej W. Rozycki Cc: Mikael Pettersson Cc: Josh Poulson Cc: Mihai Costache Cc: Stephen Hemminger Cc: Marc Zyngier Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang Cc: Dexuan Cui Cc: Simon Xiao Cc: Saeed Mahameed Cc: Jork Loeser Cc: Bjorn Helgaas Cc: devel@linuxdriverproject.org Cc: KY Srinivasan Cc: Alan Cox Cc: Sakari Ailus , Cc: linux-media@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291406420.1899@nanos Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291409460.1899@nanos --- arch/x86/kernel/apic/vector.c | 12 +++++++++++- kernel/irq/msi.c | 37 +++++++++++++++++++++++++++++++---- 2 files changed, 44 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index 52c85c8147e94c..f8b03bb8e72560 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -369,8 +369,18 @@ static int activate_reserved(struct irq_data *irqd) int ret; ret = assign_irq_vector_any_locked(irqd); - if (!ret) + if (!ret) { apicd->has_reserved = false; + /* + * Core might have disabled reservation mode after + * allocating the irq descriptor. Ideally this should + * happen before allocation time, but that would require + * completely convoluted ways of transporting that + * information. + */ + if (!irqd_can_reserve(irqd)) + apicd->can_reserve = false; + } return ret; } diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c index 9ba95433117153..2f3c4f5382cc6b 100644 --- a/kernel/irq/msi.c +++ b/kernel/irq/msi.c @@ -339,11 +339,38 @@ int msi_domain_populate_irqs(struct irq_domain *domain, struct device *dev, return ret; } -static bool msi_check_reservation_mode(struct msi_domain_info *info) +/* + * Carefully check whether the device can use reservation mode. If + * reservation mode is enabled then the early activation will assign a + * dummy vector to the device. If the PCI/MSI device does not support + * masking of the entry then this can result in spurious interrupts when + * the device driver is not absolutely careful. But even then a malfunction + * of the hardware could result in a spurious interrupt on the dummy vector + * and render the device unusable. If the entry can be masked then the core + * logic will prevent the spurious interrupt and reservation mode can be + * used. For now reservation mode is restricted to PCI/MSI. + */ +static bool msi_check_reservation_mode(struct irq_domain *domain, + struct msi_domain_info *info, + struct device *dev) { + struct msi_desc *desc; + + if (domain->bus_token != DOMAIN_BUS_PCI_MSI) + return false; + if (!(info->flags & MSI_FLAG_MUST_REACTIVATE)) return false; - return true; + + if (IS_ENABLED(CONFIG_PCI_MSI) && pci_msi_ignore_mask) + return false; + + /* + * Checking the first MSI descriptor is sufficient. MSIX supports + * masking and MSI does so when the maskbit is set. + */ + desc = first_msi_entry(dev); + return desc->msi_attrib.is_msix || desc->msi_attrib.maskbit; } /** @@ -394,7 +421,7 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev, if (ops->msi_finish) ops->msi_finish(&arg, 0); - can_reserve = msi_check_reservation_mode(info); + can_reserve = msi_check_reservation_mode(domain, info, dev); for_each_msi_entry(desc, dev) { virq = desc->irq; @@ -412,7 +439,9 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev, continue; irq_data = irq_domain_get_irq_data(domain, desc->irq); - ret = irq_domain_activate_irq(irq_data, true); + if (!can_reserve) + irqd_clr_can_reserve(irq_data); + ret = irq_domain_activate_irq(irq_data, can_reserve); if (ret) goto cleanup; } From ced6d5c11d3e7b342f1a80f908e6756ebd4b8ddd Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner Date: Fri, 22 Dec 2017 15:51:12 +0100 Subject: [PATCH 67/80] timers: Use deferrable base independent of base::nohz_active During boot and before base::nohz_active is set in the timer bases, deferrable timers are enqueued into the standard timer base. This works correctly as long as base::nohz_active is false. Once it base::nohz_active is set and a timer which was enqueued before that is accessed the lock selector code choses the lock of the deferred base. This causes unlocked access to the standard base and in case the timer is removed it does not clear the pending flag in the standard base bitmap which causes get_next_timer_interrupt() to return bogus values. To prevent that, the deferrable timers must be enqueued in the deferrable base, even when base::nohz_active is not set. Those deferrable timers also need to be expired unconditional. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Anna-Maria Gleixner Signed-off-by: Thomas Gleixner Reviewed-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Sebastian Siewior Cc: stable@vger.kernel.org Cc: rt@linutronix.de Cc: Paul McKenney Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de --- kernel/time/timer.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/kernel/time/timer.c b/kernel/time/timer.c index ffebcf878fba5d..19a9c3da769856 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -823,11 +823,10 @@ static inline struct timer_base *get_timer_cpu_base(u32 tflags, u32 cpu) struct timer_base *base = per_cpu_ptr(&timer_bases[BASE_STD], cpu); /* - * If the timer is deferrable and nohz is active then we need to use - * the deferrable base. + * If the timer is deferrable and NO_HZ_COMMON is set then we need + * to use the deferrable base. */ - if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active && - (tflags & TIMER_DEFERRABLE)) + if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && (tflags & TIMER_DEFERRABLE)) base = per_cpu_ptr(&timer_bases[BASE_DEF], cpu); return base; } @@ -837,11 +836,10 @@ static inline struct timer_base *get_timer_this_cpu_base(u32 tflags) struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]); /* - * If the timer is deferrable and nohz is active then we need to use - * the deferrable base. + * If the timer is deferrable and NO_HZ_COMMON is set then we need + * to use the deferrable base. */ - if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active && - (tflags & TIMER_DEFERRABLE)) + if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && (tflags & TIMER_DEFERRABLE)) base = this_cpu_ptr(&timer_bases[BASE_DEF]); return base; } @@ -1684,7 +1682,7 @@ static __latent_entropy void run_timer_softirq(struct softirq_action *h) base->must_forward_clk = false; __run_timers(base); - if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active) + if (IS_ENABLED(CONFIG_NO_HZ_COMMON)) __run_timers(this_cpu_ptr(&timer_bases[BASE_DEF])); } From 26456f87aca7157c057de65c9414b37f1ab881d1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 27 Dec 2017 21:37:25 +0100 Subject: [PATCH 68/80] timers: Reinitialize per cpu bases on hotplug The timer wheel bases are not (re)initialized on CPU hotplug. That leaves them with a potentially stale clk and next_expiry valuem, which can cause trouble then the CPU is plugged. Add a prepare callback which forwards the clock, sets next_expiry to far in the future and reset the control flags to a known state. Set base->must_forward_clk so the first timer which is queued will try to forward the clock to current jiffies. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Reported-by: Paul E. McKenney Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: Sebastian Siewior Cc: Anna-Maria Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos --- include/linux/cpuhotplug.h | 2 +- include/linux/timer.h | 4 +++- kernel/cpu.c | 4 ++-- kernel/time/timer.c | 15 +++++++++++++++ 4 files changed, 21 insertions(+), 4 deletions(-) diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 201ab726798631..1a32e558eb1175 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -86,7 +86,7 @@ enum cpuhp_state { CPUHP_MM_ZSWP_POOL_PREPARE, CPUHP_KVM_PPC_BOOK3S_PREPARE, CPUHP_ZCOMP_PREPARE, - CPUHP_TIMERS_DEAD, + CPUHP_TIMERS_PREPARE, CPUHP_MIPS_SOC_PREPARE, CPUHP_BP_PREPARE_DYN, CPUHP_BP_PREPARE_DYN_END = CPUHP_BP_PREPARE_DYN + 20, diff --git a/include/linux/timer.h b/include/linux/timer.h index 04af640ea95bd0..2448f9cc48a312 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -207,9 +207,11 @@ unsigned long round_jiffies_up(unsigned long j); unsigned long round_jiffies_up_relative(unsigned long j); #ifdef CONFIG_HOTPLUG_CPU +int timers_prepare_cpu(unsigned int cpu); int timers_dead_cpu(unsigned int cpu); #else -#define timers_dead_cpu NULL +#define timers_prepare_cpu NULL +#define timers_dead_cpu NULL #endif #endif diff --git a/kernel/cpu.c b/kernel/cpu.c index 41376c3ac93b06..97858477e586fb 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -1277,9 +1277,9 @@ static struct cpuhp_step cpuhp_bp_states[] = { * before blk_mq_queue_reinit_notify() from notify_dead(), * otherwise a RCU stall occurs. */ - [CPUHP_TIMERS_DEAD] = { + [CPUHP_TIMERS_PREPARE] = { .name = "timers:dead", - .startup.single = NULL, + .startup.single = timers_prepare_cpu, .teardown.single = timers_dead_cpu, }, /* Kicks the plugged cpu into life */ diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 19a9c3da769856..6be576e0220957 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -1853,6 +1853,21 @@ static void migrate_timer_list(struct timer_base *new_base, struct hlist_head *h } } +int timers_prepare_cpu(unsigned int cpu) +{ + struct timer_base *base; + int b; + + for (b = 0; b < NR_BASES; b++) { + base = per_cpu_ptr(&timer_bases[b], cpu); + base->clk = jiffies; + base->next_expiry = base->clk + NEXT_TIMER_MAX_DELTA; + base->is_idle = false; + base->must_forward_clk = true; + } + return 0; +} + int timers_dead_cpu(unsigned int cpu) { struct timer_base *old_base; From 5d62c183f9e9df1deeea0906d099a94e8a43047a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 22 Dec 2017 15:51:13 +0100 Subject: [PATCH 69/80] nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick() The conditions in irq_exit() to invoke tick_nohz_irq_exit() which subsequently invokes tick_nohz_stop_sched_tick() are: if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) If need_resched() is not set, but a timer softirq is pending then this is an indication that the softirq code punted and delegated the execution to softirqd. need_resched() is not true because the current interrupted task takes precedence over softirqd. Invoking tick_nohz_irq_exit() in this case can cause an endless loop of timer interrupts because the timer wheel contains an expired timer, but softirqs are not yet executed. So it returns an immediate expiry request, which causes the timer to fire immediately again. Lather, rinse and repeat.... Prevent that by adding a check for a pending timer soft interrupt to the conditions in tick_nohz_stop_sched_tick() which avoid calling get_next_timer_interrupt(). That keeps the tick sched timer on the tick and prevents a repetitive programming of an already expired timer. Reported-by: Sebastian Siewior Signed-off-by: Thomas Gleixner Acked-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Paul McKenney Cc: Anna-Maria Gleixner Cc: Sebastian Siewior Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos --- kernel/time/tick-sched.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 77555faf6fbc57..f7cc7abfcf252f 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -650,6 +650,11 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now) ts->next_tick = 0; } +static inline bool local_timer_softirq_pending(void) +{ + return local_softirq_pending() & TIMER_SOFTIRQ; +} + static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts, ktime_t now, int cpu) { @@ -666,8 +671,18 @@ static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts, } while (read_seqretry(&jiffies_lock, seq)); ts->last_jiffies = basejiff; - if (rcu_needs_cpu(basemono, &next_rcu) || - arch_needs_cpu() || irq_work_needs_cpu()) { + /* + * Keep the periodic tick, when RCU, architecture or irq_work + * requests it. + * Aside of that check whether the local timer softirq is + * pending. If so its a bad idea to call get_next_timer_interrupt() + * because there is an already expired timer, so it will request + * immeditate expiry, which rearms the hardware timer with a + * minimal delta which brings us back to this place + * immediately. Lather, rinse and repeat... + */ + if (rcu_needs_cpu(basemono, &next_rcu) || arch_needs_cpu() || + irq_work_needs_cpu() || local_timer_softirq_pending()) { next_tick = basemono + TICK_NSEC; } else { /* From fd45bb77ad682be728d1002431d77b8c73342836 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 22 Dec 2017 15:51:14 +0100 Subject: [PATCH 70/80] timers: Invoke timer_start_debug() where it makes sense The timer start debug function is called before the proper timer base is set. As a consequence the trace data contains the stale CPU and flags values. Call the debug function after setting the new base and flags. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: Sebastian Siewior Cc: stable@vger.kernel.org Cc: rt@linutronix.de Cc: Paul McKenney Cc: Anna-Maria Gleixner Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de --- kernel/time/timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 6be576e0220957..89a9e1b4264a07 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -1007,8 +1007,6 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option if (!ret && (options & MOD_TIMER_PENDING_ONLY)) goto out_unlock; - debug_activate(timer, expires); - new_base = get_target_base(base, timer->flags); if (base != new_base) { @@ -1032,6 +1030,8 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option } } + debug_activate(timer, expires); + timer->expires = expires; /* * If 'idx' was calculated above and the base time did not advance From 9f4533cd7334235cd4c9b9fb1b0b8791e2ba01a7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 22 Dec 2017 15:51:15 +0100 Subject: [PATCH 71/80] timerqueue: Document return values of timerqueue_add/del() The return values of timerqueue_add/del() are not documented in the kernel doc comment. Add proper documentation. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: Sebastian Siewior Cc: rt@linutronix.de Cc: Paul McKenney Cc: Anna-Maria Gleixner Link: https://lkml.kernel.org/r/20171222145337.872681338@linutronix.de --- lib/timerqueue.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/lib/timerqueue.c b/lib/timerqueue.c index 4a720ed4fdafd5..0d54bcbc8170c7 100644 --- a/lib/timerqueue.c +++ b/lib/timerqueue.c @@ -33,8 +33,9 @@ * @head: head of timerqueue * @node: timer node to be added * - * Adds the timer node to the timerqueue, sorted by the - * node's expires value. + * Adds the timer node to the timerqueue, sorted by the node's expires + * value. Returns true if the newly added timer is the first expiring timer in + * the queue. */ bool timerqueue_add(struct timerqueue_head *head, struct timerqueue_node *node) { @@ -70,7 +71,8 @@ EXPORT_SYMBOL_GPL(timerqueue_add); * @head: head of timerqueue * @node: timer node to be removed * - * Removes the timer node from the timerqueue. + * Removes the timer node from the timerqueue. Returns true if the queue is + * not empty after the remove. */ bool timerqueue_del(struct timerqueue_head *head, struct timerqueue_node *node) { From 3ce120b16cc548472f80cf8644f90eda958cf1b6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Dec 2017 17:34:43 -0800 Subject: [PATCH 72/80] kbuild: add '-fno-stack-check' to kernel build options MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by: Alexander Tsoy Reported-and-tested-by: Toralf Förster Cc: stable@kernel.org Cc: Dave Hansen Cc: Jiri Kosina Cc: Andy Lutomirski Signed-off-by: Linus Torvalds --- Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Makefile b/Makefile index ac8c441866b70d..92b74bcd3c2a28 100644 --- a/Makefile +++ b/Makefile @@ -789,6 +789,9 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) # disable invalid "can't wrap" optimizations for signed / pointers KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) +# Make sure -fstack-check isn't enabled (like gentoo apparently did) +KBUILD_CFLAGS += $(call cc-option,-fno-stack-check,) + # conserve stack if available KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) From d89e426499cf36b96161bd32970d6783f1fbcb0e Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Sat, 30 Dec 2017 14:43:31 -0600 Subject: [PATCH 73/80] objtool: Fix seg fault caused by missing parameter Fix a seg fault when no parameter is provided to 'objtool orc'. Signed-off-by: Simon Ser Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/builtin-orc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/objtool/builtin-orc.c b/tools/objtool/builtin-orc.c index 4c6b5c9ef073b3..91e8e19ff5e061 100644 --- a/tools/objtool/builtin-orc.c +++ b/tools/objtool/builtin-orc.c @@ -44,6 +44,9 @@ int cmd_orc(int argc, const char **argv) const char *objname; argc--; argv++; + if (argc <= 0) + usage_with_options(orc_usage, check_options); + if (!strncmp(argv[0], "gen", 3)) { argc = parse_options(argc, argv, check_options, orc_usage, 0); if (argc != 1) @@ -52,7 +55,6 @@ int cmd_orc(int argc, const char **argv) objname = argv[0]; return check(objname, no_fp, no_unreachable, true); - } if (!strcmp(argv[0], "dump")) { From ce90aaf5cde4ce057b297bb6c955caf16ef00ee6 Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Sat, 30 Dec 2017 14:43:32 -0600 Subject: [PATCH 74/80] objtool: Fix seg fault with clang-compiled objects Fix a seg fault which happens when an input file provided to 'objtool orc generate' doesn't have a '.shstrtab' section (for instance, object files produced by clang don't have this section). Signed-off-by: Simon Ser Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/orc_gen.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c index e5ca31429c9bac..e61fe703197baa 100644 --- a/tools/objtool/orc_gen.c +++ b/tools/objtool/orc_gen.c @@ -165,6 +165,8 @@ int create_orc_sections(struct objtool_file *file) /* create .orc_unwind_ip and .rela.orc_unwind_ip sections */ sec = elf_create_section(file->elf, ".orc_unwind_ip", sizeof(int), idx); + if (!sec) + return -1; ip_relasec = elf_create_rela_section(file->elf, sec); if (!ip_relasec) From 322f8b8b340c824aef891342b0f5795d15e11562 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 30 Dec 2017 22:13:53 +0100 Subject: [PATCH 75/80] x86/smpboot: Remove stale TLB flush invocations smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by: Dominik Brodowski Signed-off-by: Thomas Gleixner Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Linus Torvalds Cc: Linus Torvalds Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 33d6000265aa75..c3402fc30865ca 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -128,25 +128,16 @@ static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(0xa, 0xf); spin_unlock_irqrestore(&rtc_lock, flags); - local_flush_tlb(); - pr_debug("1.\n"); *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) = start_eip >> 4; - pr_debug("2.\n"); *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = start_eip & 0xf; - pr_debug("3.\n"); } static inline void smpboot_restore_warm_reset_vector(void) { unsigned long flags; - /* - * Install writable page 0 entry to set BIOS data area. - */ - local_flush_tlb(); - /* * Paranoid: Set warm reset code and vector here back * to default values. From decab0888e6e14e11d53cefa85f8b3d3b45ce73c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 30 Dec 2017 22:13:54 +0100 Subject: [PATCH 76/80] x86/mm: Remove preempt_disable/enable() from __native_flush_tlb() The preempt_disable/enable() pair in __native_flush_tlb() was added in commit: 5cf0791da5c1 ("x86/mm: Disable preemption during CR3 read+write") ... to protect the UP variant of flush_tlb_mm_range(). That preempt_disable/enable() pair should have been added to the UP variant of flush_tlb_mm_range() instead. The UP variant was removed with commit: ce4a4e565f52 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code") ... but the preempt_disable/enable() pair stayed around. The latest change to __native_flush_tlb() in commit: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches") ... added an access to a per CPU variable outside the preempt disabled regions, which makes no sense at all. __native_flush_tlb() must always be called with at least preemption disabled. Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch bad callers independent of the smp_processor_id() debugging. Signed-off-by: Thomas Gleixner Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Dominik Brodowski Cc: Linus Torvalds Cc: Linus Torvalds Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20171230211829.679325424@linutronix.de Signed-off-by: Ingo Molnar --- arch/x86/include/asm/tlbflush.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index b519da4fc03c7c..f9b48ce152ebac 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -345,15 +345,17 @@ static inline void invalidate_user_asid(u16 asid) */ static inline void __native_flush_tlb(void) { - invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); /* - * If current->mm == NULL then we borrow a mm which may change - * during a task switch and therefore we must not be preempted - * while we write CR3 back: + * Preemption or interrupts must be disabled to protect the access + * to the per CPU variable and to prevent being preempted between + * read_cr3() and write_cr3(). */ - preempt_disable(); + WARN_ON_ONCE(preemptible()); + + invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); + + /* If current->mm == NULL then the read_cr3() "borrows" an mm */ native_write_cr3(__native_read_cr3()); - preempt_enable(); } /* From a62d69857aab4caa43049e72fe0ed5c4a60518dd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 31 Dec 2017 11:24:34 +0100 Subject: [PATCH 77/80] x86/ldt: Plug memory leak in error path The error path in write_ldt() tries to free 'old_ldt' instead of the newly allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a half populated LDT pagetable, which is not a leak as it gets cleaned up when the process exits. Free both the potentially half populated LDT pagetable and the newly allocated LDT struct. This can be done unconditionally because once an LDT is mapped subsequent maps will succeed, because the PTE page is already populated and the two LDTs fit into that single page. Reported-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Dominik Brodowski Cc: Linus Torvalds Cc: Linus Torvalds Cc: Peter Zijlstra Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos Signed-off-by: Ingo Molnar --- arch/x86/kernel/ldt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 579cc4a66fdf66..500e90e44f8669 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -421,7 +421,13 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode) */ error = map_ldt_struct(mm, new_ldt, old_ldt ? !old_ldt->slot : 0); if (error) { - free_ldt_struct(old_ldt); + /* + * This only can fail for the first LDT setup. If an LDT is + * already installed then the PTE page is already + * populated. Mop up a half populated page table. + */ + free_ldt_pgtables(mm); + free_ldt_struct(new_ldt); goto out_unlock; } From 7f414195b0c3612acd12b4611a5fe75995cf10c7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 31 Dec 2017 16:52:15 +0100 Subject: [PATCH 78/80] x86/ldt: Make LDT pgtable free conditional Andy prefers to be paranoid about the pagetable free in the error path of write_ldt(). Make it conditional and warn whenever the installment of a secondary LDT fails. Requested-by: Andy Lutomirski Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ldt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 500e90e44f8669..26d713ecad34a8 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -426,7 +426,8 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode) * already installed then the PTE page is already * populated. Mop up a half populated page table. */ - free_ldt_pgtables(mm); + if (!WARN_ON_ONCE(old_ldt)) + free_ldt_pgtables(mm); free_ldt_struct(new_ldt); goto out_unlock; } From c0b23903f5b077effec90769d365646a8c2faae0 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Mon, 25 Dec 2017 16:38:58 +0100 Subject: [PATCH 79/80] MAINTAINERS: mark arch/blackfin/ and its gubbins as orphaned The blackfin architecture has seen no maintainer action of any kind since April 2015. No new code, no pull requests, no acks to patches, no response to mails, nothing. The web site has an expired certificate (expiration Sep 2017, issued in 2013), the mailing list sees no answers either, with one exception: https://sourceforge.net/p/adi-buildroot/mailman/adi-buildroot-devel/ > > Steven is no longer working on this for ADI. Acked by me if this works. Thanks. > > Best regards, > Aaron Wu > Analog Devices Inc. But, Aaron doesn't seem to respond to queries either. Signed-off-by: Adam Borowski Acked-by: Linus Walleij Cc: Arnd Bergmann Signed-off-by: Linus Torvalds --- MAINTAINERS | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index a6e86e20761e14..2d0773007c89b3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2621,24 +2621,22 @@ F: fs/bfs/ F: include/uapi/linux/bfs_fs.h BLACKFIN ARCHITECTURE -M: Steven Miao L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) T: git git://git.code.sf.net/p/adi-linux/code W: http://blackfin.uclinux.org -S: Supported +S: Orphan F: arch/blackfin/ BLACKFIN EMAC DRIVER L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://blackfin.uclinux.org -S: Supported +S: Orphan F: drivers/net/ethernet/adi/ BLACKFIN MEDIA DRIVER -M: Scott Jiang L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://blackfin.uclinux.org/ -S: Supported +S: Orphan F: drivers/media/platform/blackfin/ F: drivers/media/i2c/adv7183* F: drivers/media/i2c/vs6624* @@ -2646,25 +2644,25 @@ F: drivers/media/i2c/vs6624* BLACKFIN RTC DRIVER L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://blackfin.uclinux.org -S: Supported +S: Orphan F: drivers/rtc/rtc-bfin.c BLACKFIN SDH DRIVER L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://blackfin.uclinux.org -S: Supported +S: Orphan F: drivers/mmc/host/bfin_sdh.c BLACKFIN SERIAL DRIVER L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://blackfin.uclinux.org -S: Supported +S: Orphan F: drivers/tty/serial/bfin_uart.c BLACKFIN WATCHDOG DRIVER L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://blackfin.uclinux.org -S: Supported +S: Orphan F: drivers/watchdog/bfin_wdt.c BLINKM RGB LED DRIVER From 30a7acd573899fd8b8ac39236eff6468b195ac7d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 31 Dec 2017 14:47:43 -0800 Subject: [PATCH 80/80] Linux 4.15-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 92b74bcd3c2a28..eb1f5973813e0f 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Fearless Coyote # *DOCUMENTATION*