A laser cut and bent single piece bed concept, trying to implement a lightweight and stiff bed with full access to the mounting screws.
I only did a small prototype run and will not be able to sell it myself, however there are a few Voron related shops that started stocking it:
- Deepfriedhero (US)
- Fabreeko (US)
- 3dmakerparts (US)
- Printyplease (UK)
- Lecktor (EU)
- Unique Prints (AU)
- Zen3D (EU)
I will add additional suppliers with a vendor role on the Voron discord - please contact me on discord or create a pull request with your discord ID.
The sheet metal part is available under CC-BY-SA 4.0 AND GPL V3.0. The plastic parts are partially derived from the existing Voron parts and hence follow the same License, GPL V3.0.
This means you are allowed to modify and share the sheet metal part under either license, as long as you credit me with a link to this Github repository. You are allowed to produce and sell the part without royalties, a donation on vorondesign.com to fund future development of the Voron project is however appreciated.
https://en.wikipedia.org/wiki/Kirigami
- 1x Kirigami Bed
- 8x M2x4 to mount the bed to the carriages
- 4x M3 Heatsets + 4x M3x6 screws for the leadscrew mount
- 4x M3 Heatsets + 2 M3x6 screws for the chain mount
- 1x M3 Heatset + 1 M3x6 screw for the wire guide
- V2: added a cutout for the thermal fuse
- V3: slots instead of holes for the bed springs, allowing to adjust the Y offset over a 3mm range to support V0.0 as well as the sherpa mini mod.
The guys from Maple Leaf Makers made a nice tutorial on how to convert the stock bed to Kirigami.
