Skip to content

Latest commit

 

History

History
117 lines (96 loc) · 5.75 KB

Quickstart.md

File metadata and controls

117 lines (96 loc) · 5.75 KB
Raw

SmartShape2D - QuickStart

Finished Image

If you feel like your workflow with SmartShape2D is a little bit slow, try reading Controls and Hotkeys. The hotkeys may help you work with the tool more effectively.

Creating a Shape

  • First, instance a node of either:
    • SS2D_Shape_Open
    • SS2D_Shape_Closed
      • We'll use a closed shape for this Quickstart demo
  • SS2D_Shape_Base cannot be instanced directly
  • SS2D_Shape_Anchor is a node that attaches to a shape
  • The following Nodes are legacy nodes and are deprecated:
    • RMSmartShape2D
    • RMSmartShape2DAnchor

Nodes

Editing the Shape

  • After creating the shape node, make sure it's selected and the toolbar appears and is in Point Edit mode
    • Toolbar Default State
  • Hold ALT and Left Click on the viewport to add points
    • If this is a closed shape, the polygon will close after adding the 3rd point
  • You should now have a shape consisting of a few points and lines:

Toolbar Default State

Setting the Fill Texture of the Shape (Closed Shape only)

  • To give it some life, we'll want to edit the "Shape Material" in the Inspector
  • Under "Shape Material" Expand "Fill Textures" and you'll see an empty array
  • Set the Array's size to '1'
  • Assign a texture to the newly created slot in the array
  • After assigning the shape should now have a valid texture
    • If nothing happens after setting the texture, try to force the shape to update by adjusting one of the points
  • Note that "Fill Textures" does not affect SS2D_Shape_Open Nodes at all
  • If you want to add a normal_texture, you would add it using the "Fill Texture Normals" property

Fill Texture Set

Texturing the Edges

  • This where the rubber hits the road, the real meat of the tool
  • Under "Shape Material" add an element to the "Edge Meta Materials" property
    • Shape Material -> Edge Meta Materials
  • Set the resource of the newly created element to "SS2D_Material_Edge_Metadata"
    • Unfortunately, due to Godot limitations, every avaiable resource will offered to you instead of the one you want
    • The options are alphabetized though, which helps in finding the resource you want
  • Expand the first element of the "Edge Meta Materials" that you just set
    • Shape Material -> Edge Meta Materials -> element 1
  • Set the value of the "Edge Material" property to a new resource of type "SS2D_Material_Edge"
    • Shape Material -> Edge Meta Materials -> element 1 -> Edge Material
  • Expand "Edge Material" that you just set
  • Add an element to "Textures" and assign the texture to one that you want to use as an edge
  • The shape's edges should now update using the texture you set
    • If nothing happens after setting the texture, try to force the shape to update by adjusting one of the points
  • If you want to add a normal_texture, you would add it using the "Texture Normals" property
  • Godot should now look something like this:

Inspector

Corners

  • If your shape has sharp 90-degree corners, the texture can look a bit warped in those places
  • You can specify a unique texture to use for inner and outer corners for each Edge Material
  • The following Edge Material properties are used for corners
    • Textures Corner Inner
    • Texture Normals Corner Inner
    • Textures Corner Outer
    • Texture Normals Corner Outer
  • See how the addition of outer corner textures improves the square created earlier

Inspector

Multiple Edge Materials in One Edge

  • You can add as many Edge Meta Materials as you want to a Shape Material, each with their own Edge Material
  • For instance, you can add an additional egde with a rock texture (and its own set of corner textures) and have it render behind the grass
    • To have it render behind the grass, Set the Z index of the meta material

Inspector

Normal Range

  • Each Meta material has a Normal Range

  • The Normal Range indicates when a texture should be rendered

    • If the normal range is 0 - 360 or 0 - 0, then any angle is considered in range and the edge will always render
    • Angle "0" is Facing directly Right
    • Angle "90" is Facing directly Up
    • Angle "180" is Facing directly Left
    • Angle "270" is Facing directly Down

  • If you wanted to, for example:

    • Have rocks display on the bottom part of the shape only
    • Have grass display on the sides and top of the shape only

  • You could:

    • Set the grass Normal Range to 0 - 180
    • Set the rock Normal Range to 181 - 359

Inspector

Material Overrides

  • Using Material Overrides will allow you to change how specific edges are rendered
  • For Example, to prevent the left edge from rendering, we'll do the following:
    • Select the edge edit button from the toolbar
    • Right Click the left edge of the shape
    • Press the "Material Override" Button
    • Uncheck the "Render" Checkbox

Edge NoRender

  • You can use material overrrides to also specify a specific material for a single edge
  • For example, Checking Render and choosing the "Rock" Edge Material will cause the edge to render as rocks, even though the NormalRange configuration would otherwise have it render as grass

Multiple Textures

  • If more than one texture is specified for an Edge Material, you can specify which texture should be used
  • Enter Point Edit mode, mouseover a point, and scroll up or down to change the texture index

Anchoring Nodes to the Shape

  • To anchor nodes directly to the SmartShape2D node, use SmartSahpeAnchor2D
  • You can then make nodes children to the anchor