-
-
Notifications
You must be signed in to change notification settings - Fork 558
Setup Guide: Raspberry Pi | MJPEG Streamer Install & Setup & FFMpeg Recording
Joe Schroedl edited this page Jul 7, 2021
·
12 revisions
- https://github.com/jacksonliam/mjpg-streamer
- http://raspberrypi.stackexchange.com/questions/36734/compile-mjpg-streamer-error
# Update & Install Tools
sudo apt-get update -y
sudo apt-get upgrade -y
sudo apt-get install build-essential git imagemagick libv4l-dev libjpeg-dev cmake -y
# Clone Repo in /tmp
cd /tmp
git clone https://github.com/jacksonliam/mjpg-streamer.git
cd mjpg-streamer/mjpg-streamer-experimental
# Make
make
sudo make install
# Run
/usr/local/bin/mjpg_streamer -i "input_uvc.so -r 1280x720 -d /dev/video0 -f 30" -o "output_http.so -p 8080 -w /usr/local/share/mjpg-streamer/www"
nano /home/pi/mjpg-streamer.sh
Add the below code to ( /home/pi/mjpg-streamer.sh )
#!/bin/bash
# chmod +x mjpg-streamer.sh
# Crontab: @reboot /home/pi/mjpg-streamer/mjpg-streamer.sh start
# Crontab: @reboot /home/pi/mjpg-streamer/mjpg-streamer-experimental/mjpg-streamer.sh start
MJPG_STREAMER_BIN="/usr/local/bin/mjpg_streamer" # "$(dirname $0)/mjpg_streamer"
MJPG_STREAMER_WWW="/usr/local/share/mjpg-streamer/www"
MJPG_STREAMER_LOG_FILE="${0%.*}.log" # "$(dirname $0)/mjpg-streamer.log"
RUNNING_CHECK_INTERVAL="2" # how often to check to make sure the server is running (in seconds)
HANGING_CHECK_INTERVAL="3" # how often to check to make sure the server is not hanging (in seconds)
VIDEO_DEV="/dev/video0"
FRAME_RATE="5"
QUALITY="80"
RESOLUTION="1280x720" # 160x120 176x144 320x240 352x288 424x240 432x240 640x360 640x480 800x448 800x600 960x544 1280x720 1920x1080 (QVGA, VGA, SVGA, WXGA) # lsusb -s 001:006 -v | egrep "Width|Height" # https://www.textfixer.com/tools/alphabetical-order.php # v4l2-ctl --list-formats-ext # Show Supported Video Formates
PORT="8080"
YUV="yes"
################INPUT_OPTIONS="-r ${RESOLUTION} -d ${VIDEO_DEV} -f ${FRAME_RATE} -q ${QUALITY} -pl 60hz"
INPUT_OPTIONS="-r ${RESOLUTION} -d ${VIDEO_DEV} -q ${QUALITY} -pl 60hz --every_frame 2" # Limit Framerate with "--every_frame ", ( mjpg_streamer --input "input_uvc.so --help" )
if [ "${YUV}" == "true" ]; then
INPUT_OPTIONS+=" -y"
fi
OUTPUT_OPTIONS="-p ${PORT} -w ${MJPG_STREAMER_WWW}"
# ==========================================================
function running() {
if ps aux | grep ${MJPG_STREAMER_BIN} | grep ${VIDEO_DEV} >/dev/null 2>&1; then
return 0
else
return 1
fi
}
function start() {
if running; then
echo "[$VIDEO_DEV] already started"
return 1
fi
export LD_LIBRARY_PATH="$(dirname $MJPG_STREAMER_BIN):."
echo "Starting: [$VIDEO_DEV] ${MJPG_STREAMER_BIN} -i \"input_uvc.so ${INPUT_OPTIONS}\" -o \"output_http.so ${OUTPUT_OPTIONS}\""
${MJPG_STREAMER_BIN} -i "input_uvc.so ${INPUT_OPTIONS}" -o "output_http.so ${OUTPUT_OPTIONS}" >> ${MJPG_STREAMER_LOG_FILE} 2>&1 &
sleep 1
if running; then
if [ "$1" != "nocheck" ]; then
check_running & > /dev/null 2>&1 # start the running checking task
check_hanging & > /dev/null 2>&1 # start the hanging checking task
fi
echo "[$VIDEO_DEV] started"
return 0
else
echo "[$VIDEO_DEV] failed to start"
return 1
fi
}
function stop() {
if ! running; then
echo "[$VIDEO_DEV] not running"
return 1
fi
own_pid=$$
if [ "$1" != "nocheck" ]; then
# stop the script running check task
ps aux | grep $0 | grep start | tr -s ' ' | cut -d ' ' -f 2 | grep -v ${own_pid} | xargs -r kill
sleep 0.5
fi
# stop the server
ps aux | grep ${MJPG_STREAMER_BIN} | grep ${VIDEO_DEV} | tr -s ' ' | cut -d ' ' -f 2 | grep -v ${own_pid} | xargs -r kill
echo "[$VIDEO_DEV] stopped"
return 0
}
function check_running() {
echo "[$VIDEO_DEV] starting running check task" >> ${MJPG_STREAMER_LOG_FILE}
while true; do
sleep ${RUNNING_CHECK_INTERVAL}
if ! running; then
echo "[$VIDEO_DEV] server stopped, starting" >> ${MJPG_STREAMER_LOG_FILE}
start nocheck
fi
done
}
function check_hanging() {
echo "[$VIDEO_DEV] starting hanging check task" >> ${MJPG_STREAMER_LOG_FILE}
while true; do
sleep ${HANGING_CHECK_INTERVAL}
# treat the "error grabbing frames" case
if tail -n2 ${MJPG_STREAMER_LOG_FILE} | grep -i "error grabbing frames" > /dev/null; then
echo "[$VIDEO_DEV] server is hanging, killing" >> ${MJPG_STREAMER_LOG_FILE}
stop nocheck
fi
done
}
function help() {
echo "Usage: $0 [start|stop|restart|status]"
return 0
}
if [ "$1" == "start" ]; then
start && exit 0 || exit -1
elif [ "$1" == "stop" ]; then
stop && exit 0 || exit -1
elif [ "$1" == "restart" ]; then
stop && sleep 1
start && exit 0 || exit -1
elif [ "$1" == "status" ]; then
if running; then
echo "[$VIDEO_DEV] running"
exit 0
else
echo "[$VIDEO_DEV] stopped"
exit 1
fi
else
help
fi
# Make Executable
chmod +x /home/pi/mjpg-streamer.sh
# Open Cron Job
crontab -e
# Add line
@reboot /home/pi/mjpg-streamer.sh start
http://www.jeffreythompson.org/blog/2014/11/13/installing-ffmpeg-for-raspberry-pi/
# Install FFMpeg from Package Manager
sudo apt-get update
sudo apt-get install ffmpeg -y
---- OR ------
# COMPILE & INSTALL FFMPEG
# Run as Sudo
sudo -i
# INSTALL H264 SUPPORT
cd /usr/src
git clone https://code.videolan.org/videolan/x264.git
cd x264
./configure --host=arm-unknown-linux-gnueabi --enable-static --disable-opencl
make
sudo make install
# COMPILE & INSTALL FFMPEG (This may take a REALLY long time, so be patient.)
cd /usr/src
git clone https://github.com/FFmpeg/FFmpeg.git
cd FFmpeg
sudo ./configure --arch=armel --target-os=linux --enable-gpl --enable-libx264 --enable-nonfree
make
sudo make install
# [Varables]
source_stream="http://localhost:8080/?action=stream"
destination_directory="/home/pi/Videos"
destination_file="cncjs-recording_$(date +'%Y%m%d_%H%M%S').mpeg"
# Recored Stream w/ ffmpeg
ffmpeg -f mjpeg -re -i "${source_stream}" -q:v 10 "${destination_directory}/${destination_file}"
Join CNCjs Users Group on Facebook to share your experiences with other people.
Site: https://cnc.js.org
- Introduction
- Installation
- Using Pendants
-
Raspberry Pi Setup Guide
- System Setup & Preparation
- Install Node.js & CNCjs
- Install Node.js via Package Manager (Recommended)
- Install Node.js via Node Version Manager (NVM) (Alternative)
- Install Node.js Manually (Alternative)
- Use PM2 to auto-start CNCjs (Optional)
- Use Port 80 (Optional)
- Maintain
- Additional Setup Options:
- CNCjs UI on Pi - Adventures in PiLand
- Pi with Arduino Due
- Electron App
- User Guide
- Tool Change
- Troubleshooting
-
FAQ
- Forgot your password?
- How can I enable WebGL in my browser?
- Raspberry Pi: Error opening serial port "ttyAMA0"
- Webcam Streaming with Raspberry Pi
- Restream RTSP to M-JPEG
- Connect to an Arduino using WiFi
- Install Native Addons with Node.js v4
- Install Serialport on OS X El Capitan
- Kernel panic issue on macOS Sierra for devices using the CH340G, CH34G or CH34X chipset
- Testing without Arduino board
- Development
- API
- Wiki History
- Resources
- About