README.md

Looking for the latest version?

I've moved the project back to thisiskeithb/Marlin/tree/prusa-aio/bugfix-2.0.x

- thisiskeithb

All-in-One Prusa SKR Marlin Firmware (Beta)

About

Originally configured for a Prusa MK3S/+ Bear upgraded with an SKR 1.4, this All-in-One firmware supports 210/320mm Bear and 220/320/420mm Caribou printers with common upgrades like:

• Motherboards
  • SKR 1.4 + Turbo
  • SKR 2.0 Rev. B with flash drive support
  • BTT002
  • MKS/Makerbase SGen-L V2 (Coming soon!)
  • MKS/Makerbase Robin Nano V3 (Coming soon!)
• Drivers
  • TMC2209s
  • TMC5160s (Coming soon!)
• Display
  • BigTreeTech dual mode TFT (TFT35/TFT50/TFT70/etc.)
  • WINSTAR OLED-based RepRapDiscount smart controller
• LDO/Moons Stepper Motors
  • Planetary extruder
  • 0.9° X/Y/E
• Bondtech BMG extruder
  • BMG upgrade kit from Bondtech
  • Self-printed BMG
• Slice Engineering 450°C High Temperature thermistor
• Probes
  • BLTouch
  • SuperPINDA
• NeoPixels

Configuring & Building Prusa SKR Firmware

To configure this firmware, edit Prusa_SKR_Configuration.h

To build this firmware, you'll need PlatformIO. Detailed setup instructions can be found on the Building Marlin with PlatformIO for ReArm guide.

Helpful links

• Chris Warkocki's SKR Bear Github, SKR Bear wiring guide, and SKR Bear videos
• #🐻-skr-bear-firmware on The FDM Lounge Discord server
• Prusa Bear Upgrade Facebook group
• Prusa Community Facebook group

Credits

If you find this project helpful, please consider donating:

• Chris Warkocki [@codiac2600], SKR Bear Project - Patreon
• Keith Bennett [@thisiskeithb], Marlin tester/config builder - Github Sponsors
• Grégoire Saunier [@gregsaun], Prusa Bear Project - Patreon
• Scott Lahteine [@thinkyhead], Lead Marlin dev/maintainer - Donate

License

Marlin and the Prusa SKR Firmware is published under the GPL license because we believe in open development.