Sensors stuck #71

Operrr · 2023-11-20T14:08:42Z

I have LYWSD03MMC sensors, I flashed 5 of them with firmware 1.0.6 and after some time all the sensors freeze, stop sending readings and the values on the display do not change. After a power reset they work normally for a while and freeze again. On the stock BT firmware the sensors worked flawlessly

drwalr · 2023-11-20T14:25:13Z

also have this problem,
Manual reading in Z2M gives an error in the 'MAC transaction expired' logs

The connection to the coordinator is good.

oosinnyi · 2023-11-24T07:22:32Z

Same problem on latest firmware.

wimpie007 · 2023-11-24T07:25:52Z

Same issues here. OTA from 1.0.5 to 1.0.6 was successfull, but after a few hours, reporting stopped. (and display freezed)
Pulling battery kicks it on again.

pvvx · 2023-11-25T23:46:04Z

This is a particular error when switching the operation of the end device through a router.
For such cases, it is advisable to support a “Poll Management Cluster” on the end device and router.

https://community.silabs.com/s/article/the-poll-control-cluster-a-reliable-way-for-sed-to-receive-asynchronous-transmi?language=en_US

wimpie007 · 2023-11-26T00:04:12Z

This is the only device i have (and i have a LOT) that shows this behavior.
I didnt configure a "Poll Management Cluster” for neither of the devices....

Fienberber · 2023-12-03T13:57:22Z

I have the exact same issue on all 4 sensors. Power reset fix the issue for some time.
Those two issues don't seem to occur at the same time tho.

I still have HA updates while the screen reports old values.
I don't see how to configure "Poll Management Cluster” using ZHA.

pvvx · 2023-12-03T14:37:54Z

The "Poll Management Cluster” does not need to be configured. An upstream device—a router or coordinator—works with it.

See 3.16 "Poll Control" in "ZigBee Cluster Library Specification"

enryIT · 2023-12-11T18:24:28Z

The "Poll Management Cluster” does not need to be configured. An upstream device—a router or coordinator—works with it.

See 3.16 "Poll Control" in "ZigBee Cluster Library Specification"

So the problem is in both ZHA and zigbee2mqtt or in the zigbee coordinator itself?

pvvx · 2023-12-11T18:28:41Z

So the problem is in both ZHA and zigbee2mqtt or in the zigbee coordinator itself?

I have not observed any of the problems described here on ZHA since the first versions of the firmware.
It is not even possible to reproduce the problems described.

Users with sensors falling off do not describe the full Zigbee network configuration and other technical details. And they hide the thermometer versions - B1.4...B2.0?

It is only possible to assume that the problem lies in the coordinator's firmware.

GravitySandwichh · 2023-12-12T21:25:28Z

Same issue happening here. Sonoff ZBDongle-P on Zigbee2MQTT. They constantly freeze or even drop off the network. Other devices are completely fine and stay working properly. Not usable in this state :(

Everything was fine on 1.0.5 but 1.0.6 seems to have broken it. LCD on the Xiaomi also freezes so it's definitely client side and not coordinator side.

jul1an353 · 2023-12-13T14:28:34Z

I have the same problem with seven sensors I have just bought, so probably the latest hardware revision. Zigbee2mqtt with SONOFF Zigbee 3.0 USB Dongle Plus coordinator. all sensors freeze after about a day in use.
I have tried to downgrade to 1.0.5 without success.

Error 2023-12-13 15:24:31 Update of 'wohnen sensor2' failed (Image type mismatch)

my_index.json:
[
{
"manufacturerCode": 4417,
"imageType": 522,
"url": "1141-0203-10053001-z03mmc.zigbee",
"force": true
}
]

I would appreciate any help with downgrading.

pvvx · 2023-12-13T15:05:05Z

help with downgrading.

Restore to BLE, use the Zigbee OTA file with https://github.com/pvvx/ATC_MiThermometer/raw/master/zigbee_ota/1141-0203-99993001-ATC_v46.zigbee
Use TelinkMiFlasher.html by pasting the link "https://github.com/devbis/z03mmc/releases/download/1.0.5/1141-0203-10053001-z03mmc.zigbee" into the download option.

jul1an353 · 2023-12-13T15:33:52Z

no luck, same error: Error 2023-12-13 16:25:59Update of 'schlafen sensor' failed (Image type mismatch)

Debug 2023-12-13 16:25:59Got OTA request '{"fieldControl":0,"manufacturerCode":4417,"imageType":522,"fileVersion":17903617}'
Debug 2023-12-13 16:25:59ZigbeeOTA: downloaded main index
Debug 2023-12-13 16:25:59ZigbeeOTA: Loading override index /app/data/my_index.json
Debug 2023-12-13 16:25:59ZigbeeOTA: getting local firmware file /app/data/1141-0203-99993001-ATC_v46.zigbee
Debug 2023-12-13 16:25:59getNewImage for '0xa4c1385f60f296ad', meta {"fileVersion":2576953345,"url":"1141-0203-99993001-ATC_v46.zigbee","force":true}
Debug 2023-12-13 16:25:59ZigbeeOTA: getting local firmware file /app/data/1141-0203-99993001-ATC_v46.zigbee
Debug 2023-12-13 16:25:59getNewImage for '0xa4c1385f60f296ad', image header {"otaUpgradeFileIdentifier":{"type":"Buffer","data":[30,241,238,11]},"otaHeaderVersion":256,"otaHeaderLength":56,"otaHeaderFieldControl":0,"manufacturerCode":4417,"imageType":515,"fileVersion":2576953345,"zigbeeStackVersion":2,"otaHeaderString":"Telink OTA BLE device\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000","totalImageSize":82674}
Debug 2023-12-13 16:25:59Update of 'schlafen sensor' failed (AssertionError [ERR_ASSERTION]: Image type mismatch)
Info 2023-12-13 16:25:59MQTT publish: topic 'zigbee2mqtt/schlafen sensor', payload '{"battery":23,"humidity":69.5,"last_seen":"2023-12-13T15:25:59.639Z","linkquality":98,"temperature":18.7,"temperature_display_mode":null,"update":{"installed_version":17903617,"latest_version":2576953345,"state":"available"},"update_available":null,"voltage":3100}'
Info 2023-12-13 16:25:59MQTT publish: topic 'zigbee2mqtt/bridge/response/device/ota_update/update', payload '{"data":{"id":"schlafen sensor"},"error":"Update of 'schlafen sensor' failed (Image type mismatch)","status":"error","transaction":"otbeu-5"}'
Error 2023-12-13 16:25:59Update of 'schlafen sensor' failed (Image type mismatch)

is the imageType maybe tot correct?

my_index.json:
[
{
"manufacturerCode": 4417,
"imageType": 522,
"url": "1141-0203-99993001-ATC_v46.zigbee",
"force": true
}
]

pvvx · 2023-12-13T15:38:02Z

https://github.com/pvvx/ATC_MiThermometer/raw/master/zigbee_ota/1141-0203-99993001-ATC_v46.zigbee

Internal Headers:
Zigbee OTA Info: ManCode: 1141, ImageType: 0203, FwVer: 99993001 - APP Release: 9.9 Build: 9.9, Stack Version: 3.0 Release: 0.1

my_index.json:
[
{
"manufacturerCode": 4417,
"imageType": 522,
"url": "1141-0203-99993001-ATC_v46.zigbee",
"force": true
}
]

Incorrect. -> "imageType": 515,

Debug 2023-12-13 16:25:59Got OTA request '{"fieldControl":0,"manufacturerCode":4417,"imageType":522,"fileVersion":17903617}'

"manufacturerCode": 4417 -> 0x1141,
"imageType": 522 -> 0x020A,
"fileVersion": 17903617 -> 0x01113001

https://github.com/pvvx/ZigbeeTLc#zigbee-ota

You can determine what firmware you have by the version number:

0x0203 - firmware from devbis is used, version number from 1.0.0.1 to 1.0.0.6.
0x020A - my firmware is used, version number from 0.1.0.1 to 0.1.1.6.

The firmware that works simultaneously in Zigbee and BLE is version 0.2.0.1 onwards.

The version number listed here is incorrect. Missing "0":

If you load all the files from https://github.com/pvvx/ATC_MiThermometer/tree/master/zigbee_ota into ZHA, then all types of known thermometers will be updated in the BLE version.
Use "raw" download from github!

jul1an353 · 2023-12-14T13:16:15Z

Edit: After flashing over SWS-UART with TLSR825xComFlasher.py first ATC_ota_40000.bin, 2. z03mmc.bin (v1.0.5) and then updating via Z2M to v1.06 all my sensors working perfect. thanks a lot.

WickedDurkie · 2024-02-12T08:16:44Z

This is still an issue on the latest firmware (1.10).

Fr3di · 2024-02-14T15:03:55Z

Have the same issue after updating to v1.10 but only on one device :/

drwalr mentioned this issue Nov 27, 2023

LYWSD03MMC -sensor freezes ver. 0.1.1.2. pvvx/ZigbeeTLc#17

Closed

pvvx mentioned this issue Dec 16, 2023

Отваливание термометров из сети Zigbee. #95

Open

KGS501 mentioned this issue May 31, 2024

Crashed sensors #145

Open

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Sensors stuck #71

Sensors stuck #71

Operrr commented Nov 20, 2023

drwalr commented Nov 20, 2023

oosinnyi commented Nov 24, 2023

wimpie007 commented Nov 24, 2023

pvvx commented Nov 25, 2023 •

edited

Loading

wimpie007 commented Nov 26, 2023

Fienberber commented Dec 3, 2023 •

edited

Loading

pvvx commented Dec 3, 2023 •

edited

Loading

enryIT commented Dec 11, 2023 •

edited

Loading

pvvx commented Dec 11, 2023 •

edited

Loading

GravitySandwichh commented Dec 12, 2023

jul1an353 commented Dec 13, 2023

pvvx commented Dec 13, 2023 •

edited

Loading

jul1an353 commented Dec 13, 2023

pvvx commented Dec 13, 2023 •

edited

Loading

jul1an353 commented Dec 14, 2023 •

edited

Loading

WickedDurkie commented Feb 12, 2024

Fr3di commented Feb 14, 2024

Sensors stuck #71

Sensors stuck #71

Comments

Operrr commented Nov 20, 2023

drwalr commented Nov 20, 2023

oosinnyi commented Nov 24, 2023

wimpie007 commented Nov 24, 2023

pvvx commented Nov 25, 2023 • edited Loading

wimpie007 commented Nov 26, 2023

Fienberber commented Dec 3, 2023 • edited Loading

pvvx commented Dec 3, 2023 • edited Loading

enryIT commented Dec 11, 2023 • edited Loading

pvvx commented Dec 11, 2023 • edited Loading

GravitySandwichh commented Dec 12, 2023

jul1an353 commented Dec 13, 2023

pvvx commented Dec 13, 2023 • edited Loading

jul1an353 commented Dec 13, 2023

pvvx commented Dec 13, 2023 • edited Loading

jul1an353 commented Dec 14, 2023 • edited Loading

WickedDurkie commented Feb 12, 2024

Fr3di commented Feb 14, 2024

pvvx commented Nov 25, 2023 •

edited

Loading

Fienberber commented Dec 3, 2023 •

edited

Loading

pvvx commented Dec 3, 2023 •

edited

Loading

enryIT commented Dec 11, 2023 •

edited

Loading

pvvx commented Dec 11, 2023 •

edited

Loading

pvvx commented Dec 13, 2023 •

edited

Loading

pvvx commented Dec 13, 2023 •

edited

Loading

jul1an353 commented Dec 14, 2023 •

edited

Loading