# Grid to Grid Anomoly Example

[config]

LOG_MET_VERBOSITY = 5
LOG_LEVEL = DEBUG

# time looping - options are INIT, INIT, RETRO, and REALTIME
LOOP_BY = INIT

# Format of INIT_BEG and VALID_END
INIT_TIME_FMT = %Y%m%d%H

# Start time for METplus run
INIT_BEG = 2022051100

# End time for METplus run
INIT_END = 2022051100

# Increment between METplus runs in seconds. Must be >= 60
INIT_INCREMENT = 6H

# Options are times, processes
# times = run all items in the PROCESS_LIST for a single initialization
# time, then repeat until all times have been evaluated.
# processes = run each item in the PROCESS_LIST for all times
#   specified, then repeat for the next item in the PROCESS_LIST.
LOOP_ORDER = times

# List of applications to run
PROCESS_LIST = GridStat

# list of variables to compare

FCST_VAR1_NAME = AOTK
FCST_VAR1_LEVELS = A0
FCST_VAR1_THRESH =  >=0.1, >=0.2, >=0.4
FCST_VAR1_OPTIONS = GRIB2_process=62000;GRIB2_ipdtmpl_index = [ 2, 10 ]; GRIB2_ipdtmpl_val = [ 62000, 545 ]
OBS_VAR1_NAME = TOTEXTTAU
OBS_VAR1_OPTIONS = file_type = NETCDF_NCCF
##OBS_VAR1_OPTIONS = censor_thresh = [ <=0]; censor_val = [ -9999]; GRIB_lvl_typ = 200;
OBS_VAR1_LEVELS =  ({valid?fmt=%Y%m%d_%H%M},*,*)
#OBS_VAR1_LEVELS =  ({lead?fmt=%H},*,*)
OBS_VAR1_THRESH = >=0.1, >=0.2, >=0.4

# list of forecast leads to process
LEAD_SEQ = begin_end_incr(0,120,6)

# description of data to be processed
# used in output file path
MODEL = GEFSAERO
OBTYPE = ANLYS

# location of grid_stat MET config file
GRID_STAT_CONFIG_FILE = {PARM_BASE}/met_config/GridStatConfig_wrapped

#GRID_STAT_OUTPUT_PREFIX = {MODEL}_{CURRENT_FCST_NAME}_vs_{OBTYPE}_{CURRENT_OBS_NAME}_{CURRENT_FCST_LEVEL}
GRID_STAT_OUTPUT_PREFIX = GEFSAERO_TAOD_vs_GEOS5_TAOD

GRID_STAT_REGRID_TO_GRID = OBS
GRID_STAT_REGRID_METHOD = NEAREST
GRID_STAT_REGRID_WIDTH = 1
GRID_STAT_REGRID_VLD_THRESH = 1
GRID_STAT_REGRID_VLD_SHAPE = SQUARE


GRID_STAT_OUTPUT_FLAG_SL1L2 = STAT
GRID_STAT_OUTPUT_FLAG_CTC = STAT
GRID_STAT_OUTPUT_FLAG_CNT = STAT

GRID_STAT_GRID = FULL

GRID_STAT_NC_PAIRS_FLAG_LATLON = FALSE
GRID_STAT_NC_PAIRS_FLAG_RAW = FALSE
GRID_STAT_NC_PAIRS_FLAG_DIFF = FALSE
GRID_STAT_NC_PAIRS_FLAG_CLIMO = FALSE
GRID_STAT_NC_PAIRS_FLAG_APPLY_MASK = FALSE

# variables to describe format of forecast data
FCST_IS_PROB = false

# variables to describe format of observation data
#  none needed

[dir]

OUTPUT_BASE = /gpfs/dell2/emc/verification/noscrub/Partha.Bhattacharjee/Aerosol/GSD_Chem/METplus_test/output6
METPLUS_BASE = /gpfs/dell2/emc/verification/noscrub/emc.metplus/METplus/METplus-4.0.0
MET_BUILD_BASE = /gpfs/dell2/emc/verification/noscrub/emc.metplus/met/10.0.0
MET_INSTALL_DIR = /gpfs/dell2/emc/verification/noscrub/emc.metplus/met/10.0.0
PARM_BASE = {METPLUS_BASE}/parm
INPUT_BASE=/i/dont/need/to/set/this

# input and output data directories
FCST_GRID_STAT_INPUT_DIR = /gpfs/dell4/nco/ops/com/gefs/prod
OBS_GRID_STAT_INPUT_DIR = /gpfs/dell2/emc/verification/noscrub/Partha.Bhattacharjee/Aerosol/GSD_Chem/GEOS5/Analysis/Test
GRID_STAT_OUTPUT_DIR = {OUTPUT_BASE}

[filename_templates]
# format of filenames
# FCST
FCST_GRID_STAT_INPUT_TEMPLATE = gefs.{valid?fmt=%Y%m%d}/00/chem/pgrb2ap25/gefs.chem.t00z.a2d_0p25.f{lead?fmt=%3H}.grib2

# ANLYS
OBS_GRID_STAT_INPUT_TEMPLATE = GEOS.fp.asm.tavg3_2d_aer_Nx.{valid?fmt=%Y%m%d_%H%M}.V01.nc4

GRID_STAT_OUTPUT_TEMPLATE = grid_stat