Skip to content

Latest commit

 

History

History
92 lines (64 loc) · 2.67 KB

README.md

File metadata and controls

92 lines (64 loc) · 2.67 KB
Raw

drm-kmod

The DRM drivers ported from Linux to FreeBSD using linuxkpi.

Installing from sources

Requirements

You need to have the sources of FreeBSD kernel available and they MUST correspond to the installed version of FreeBSD.

There are several ways to get them:

  • by using the FreeBSD installer
  • by using the FreeBSD-src-sys package if you use PkgBase
  • by cloning the Git repository from https://git.FreeBSD.org/src.git or any mirror

By default, Makefiles expect the sources of the kernel to be in /usr/src/sys. The installer and the PkgBase package will install them in that directory. If you clone from Git, you can set SYSDIR=/path/to/FreeBSD/src/sys on the make(1) command line or in the environment when compiling the drivers and their firmwares.

Building

make -j12 DEBUG_FLAGS=-g SYSDIR=/usr/src/sys

As stated in the requirements section, set SYSDIR to the location where you put the FreeBSD kernel sources. The example above shows the default value.

Installing

sudo make install DEBUG_FLAGS=-g SYSDIR=/usr/src/sys KMODDIR=/boot/modules

As stated in the requirements section, set SYSDIR to the location where you put the FreeBSD kernel sources. The example above shows the default value.

Likewise, set KMODDIR to the location of the kernel you want to install the drivers for. The example above shows the default value which is the global directory, used by all installed kernels

Important

The DRM drivers MUST be compiled against the kernel sources corresponding to the installed kernel you want to use them with.

GPU firmwares

DRM drivers depend on binary firmwares. They are maintained in a separate Git repository at https://github.com/freebsd/drm-kmod-firmware.

The binary firmwares are packaged into kernel modules and loaded automatically by the DRM drivers when needed.

The kernel modules can be compiled by following the same instructions as the DRM drivers. The same constraint applies: use the matching kernel sources.

Contributing

Tip

This part is a TL;DR version of the porting process. For the full version, please visit https://github.com/freebsd/drm-kmod/wiki/Porting-a-new-version-of-DRM-drivers-from-Linux.

  1. Clone Linux:

    git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git /path/to/linux-src

  2. Extract Linux patches:

    ./scripts/drmgeneratepatch \
    /path/to/linux-src \
    /path/to/patches-6.7 \
    v6.6..v6.7

  3. Filter out already applied patches:

    ./scripts/drmcheckapplied /path/to/patches-6.7

  4. Apply patches to drm-kmod:

    ./scripts/drmpatch /path/to/patches-6.7