temperature sensor: Add support on ESP32-S3,

Closes #8086

components/driver/CMakeLists.txt

@@ -67,6 +67,7 @@ if(${target} STREQUAL "esp32s3")
                      "spi_slave_hd.c"
                      "touch_sensor_common.c"
                      "esp32s3/touch_sensor.c"
+                     "esp32s3/rtc_tempsensor.c"
                     )
 endif()
 

components/driver/esp32c3/rtc_tempsensor.c

@@ -111,6 +111,7 @@ esp_err_t temp_sensor_stop(void)
 {
     APB_SARADC.apb_tsens_ctrl.tsens_pu = 0;
     APB_SARADC.apb_tsens_ctrl2.tsens_clk_sel = 0;
+    tsens_hw_state = TSENS_HW_STATE_CONFIGURED;
     return ESP_OK;
 }
 

components/driver/esp32h2/rtc_tempsensor.c

@@ -111,6 +111,7 @@ esp_err_t temp_sensor_stop(void)
 {
     APB_SARADC.apb_tsens_ctrl.tsens_pu = 0;
     APB_SARADC.apb_tsens_ctrl2.tsens_clk_sel = 0;
+    tsens_hw_state = TSENS_HW_STATE_CONFIGURED;
     return ESP_OK;
 }
 

components/driver/esp32s2/rtc_tempsensor.c

@@ -129,6 +129,7 @@ esp_err_t temp_sensor_stop(void)
         vSemaphoreDelete(rtc_tsens_mux);
         rtc_tsens_mux = NULL;
     }
+    tsens_hw_state = TSENS_HW_STATE_CONFIGURED;
     return ESP_OK;
 }
 

components/driver/esp32s3/rtc_tempsensor.c

@@ -0,0 +1,168 @@
+/*
+ * SPDX-FileCopyrightText: 2016-2021 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <stdlib.h>
+#include <ctype.h>
+#include <math.h>
+#include "esp_types.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/semphr.h"
+#include "esp_log.h"
+#include "esp_check.h"
+#include "soc/rtc_cntl_reg.h"
+#include "soc/rtc_io_reg.h"
+#include "soc/rtc_io_struct.h"
+#include "soc/sens_reg.h"
+#include "soc/sens_struct.h"
+#include "driver/temp_sensor.h"
+#include "regi2c_ctrl.h"
+#include "esp_log.h"
+#include "esp_efuse_rtc_calib.h"
+
+static const char *TAG = "tsens";
+
+#define TSENS_XPD_WAIT_DEFAULT 0xFF   /* Set wait cycle time(8MHz) from power up to reset enable. */
+#define TSENS_ADC_FACTOR  (0.4386)
+#define TSENS_DAC_FACTOR  (27.88)
+#define TSENS_SYS_OFFSET  (20.52)
+
+typedef struct {
+    int index;
+    int offset;
+    int set_val;
+    int range_min;
+    int range_max;
+    int error_max;
+} tsens_dac_offset_t;
+
+static const tsens_dac_offset_t dac_offset[TSENS_DAC_MAX] = {
+    /*     DAC     Offset reg_val  min  max  error */
+    {TSENS_DAC_L0,   -2,     5,    50,  125,   3},
+    {TSENS_DAC_L1,   -1,     7,    20,  100,   2},
+    {TSENS_DAC_L2,    0,    15,   -10,   80,   1},
+    {TSENS_DAC_L3,    1,    11,   -30,   50,   2},
+    {TSENS_DAC_L4,    2,    10,   -40,   20,   3},
+};
+
+typedef enum {
+    TSENS_HW_STATE_UNCONFIGURED,
+    TSENS_HW_STATE_CONFIGURED,
+    TSENS_HW_STATE_STARTED,
+} tsens_hw_state_t;
+
+static tsens_hw_state_t tsens_hw_state = TSENS_HW_STATE_UNCONFIGURED;
+
+static float s_deltaT = NAN; // Unused number
+
+esp_err_t temp_sensor_set_config(temp_sensor_config_t tsens)
+{
+    esp_err_t err = ESP_OK;
+    if (tsens_hw_state == TSENS_HW_STATE_STARTED) {
+        ESP_LOGE(TAG, "Do not configure the temp sensor when it's running!");
+        err = ESP_ERR_INVALID_STATE;
+    }
+    CLEAR_PERI_REG_MASK(ANA_CONFIG_REG, I2C_SAR_M);
+    SET_PERI_REG_MASK(ANA_CONFIG2_REG, ANA_SAR_CFG2_M);
+    REGI2C_WRITE_MASK(I2C_SAR_ADC, I2C_SARADC_TSENS_DAC, dac_offset[tsens.dac_offset].set_val);
+    SENS.sar_tctrl.tsens_clk_div = tsens.clk_div;
+    SENS.sar_tctrl.tsens_power_up_force = 1;
+    SENS.sar_tctrl.tsens_power_up = 1;
+    SENS.sar_tctrl2.tsens_xpd_force = 1;
+    ESP_LOGI(TAG, "Config temperature range [%d°C ~ %d°C], error < %d°C",
+             dac_offset[tsens.dac_offset].range_min,
+             dac_offset[tsens.dac_offset].range_max,
+             dac_offset[tsens.dac_offset].error_max);
+    tsens_hw_state = TSENS_HW_STATE_CONFIGURED;
+    return err;
+}
+
+esp_err_t temp_sensor_get_config(temp_sensor_config_t *tsens)
+{
+    ESP_RETURN_ON_FALSE(tsens != NULL, ESP_ERR_INVALID_ARG, TAG, "no tsens specified");
+    CLEAR_PERI_REG_MASK(ANA_CONFIG_REG, I2C_SAR_M);
+    SET_PERI_REG_MASK(ANA_CONFIG2_REG, ANA_SAR_CFG2_M);
+    tsens->dac_offset = REGI2C_READ_MASK(I2C_SAR_ADC, I2C_SARADC_TSENS_DAC);
+    for (int i = TSENS_DAC_L0; i < TSENS_DAC_MAX; i++) {
+        if ((int)tsens->dac_offset == dac_offset[i].set_val) {
+            tsens->dac_offset = dac_offset[i].index;
+            break;
+        }
+    }
+    tsens->clk_div = SENS.sar_tctrl.tsens_clk_div;
+    return ESP_OK;
+}
+
+esp_err_t temp_sensor_start(void)
+{
+    esp_err_t err = ESP_OK;
+    if (tsens_hw_state != TSENS_HW_STATE_CONFIGURED) {
+        ESP_LOGE(TAG, "Temperature sensor is already running or not be configured");
+        err = ESP_ERR_INVALID_STATE;
+    }
+    SENS.sar_tctrl.tsens_dump_out = 0;
+    SENS.sar_tctrl.tsens_power_up = 1;
+    SENS.sar_peri_clk_gate_conf.tsens_clk_en = 1;
+    tsens_hw_state = TSENS_HW_STATE_STARTED;
+    return err;
+}
+
+esp_err_t temp_sensor_stop(void)
+{
+    SENS.sar_tctrl.tsens_power_up = 0;
+    tsens_hw_state = TSENS_HW_STATE_CONFIGURED;
+    return ESP_OK;
+}
+
+esp_err_t temp_sensor_read_raw(uint32_t *tsens_out)
+{
+    ESP_RETURN_ON_FALSE(tsens_out != NULL, ESP_ERR_INVALID_ARG, TAG, "no tsens_out specified");
+    SENS.sar_tctrl.tsens_dump_out = 1;
+    while (!SENS.sar_tctrl.tsens_ready);
+    *tsens_out = SENS.sar_tctrl.tsens_out;
+    SENS.sar_tctrl.tsens_dump_out = 0;
+    return ESP_OK;
+}
+
+static void read_delta_t_from_efuse(void)
+{
+    uint32_t version = esp_efuse_rtc_calib_get_ver();
+    if (version == 1) {
+        // fetch calibration value for temp sensor from eFuse
+        s_deltaT = esp_efuse_rtc_calib_get_cal_temp(version);
+    } else {
+        // no value to fetch, use 0.
+        s_deltaT = 0;
+    }
+    ESP_LOGD(TAG, "s_deltaT = %f", s_deltaT);
+}
+
+static float parse_temp_sensor_raw_value(uint32_t tsens_raw, const int dac_offset)
+{
+    if (isnan(s_deltaT)) { //suggests that the value is not initialized
+        read_delta_t_from_efuse();
+    }
+    float result = (TSENS_ADC_FACTOR * (float)tsens_raw - TSENS_DAC_FACTOR * dac_offset - TSENS_SYS_OFFSET) - s_deltaT;
+    return result;
+}
+
+esp_err_t temp_sensor_read_celsius(float *celsius)
+{
+    ESP_RETURN_ON_FALSE(celsius != NULL, ESP_ERR_INVALID_ARG, TAG, "celsius points to nothing");
+    temp_sensor_config_t tsens;
+    uint32_t tsens_out = 0;
+    esp_err_t ret = temp_sensor_get_config(&tsens);
+    if (ret == ESP_OK) {
+        ret = temp_sensor_read_raw(&tsens_out);
+        ESP_RETURN_ON_FALSE(ret == ESP_OK, ret, TAG, "failed to read raw data");
+        const tsens_dac_offset_t *dac = &dac_offset[tsens.dac_offset];
+        *celsius = parse_temp_sensor_raw_value(tsens_out, dac->offset);
+        if (*celsius < dac->range_min || *celsius > dac->range_max) {
+            ESP_LOGW(TAG, "Exceeding the temperature range!");
+            ret = ESP_ERR_INVALID_STATE;
+        }
+    }
+    return ret;
+}

components/efuse/esp32s3/esp_efuse_rtc_calib.c

@@ -96,3 +96,19 @@ esp_err_t esp_efuse_rtc_calib_get_cal_voltage(int version, uint32_t adc_unit, in
 
     return ESP_OK;
 }
+
+float esp_efuse_rtc_calib_get_cal_temp(int version)
+{
+    assert(version == 1);
+    const esp_efuse_desc_t** cal_temp_efuse;
+    cal_temp_efuse = ESP_EFUSE_TEMP_CALIB;
+    int cal_temp_size = esp_efuse_get_field_size(cal_temp_efuse);
+    assert(cal_temp_size == 9);
+
+    uint32_t cal_temp = 0;
+    esp_err_t err = esp_efuse_read_field_blob(cal_temp_efuse, &cal_temp, cal_temp_size);
+    assert(err == ESP_OK);
+    (void)err;
+    // BIT(8) stands for sign: 1: negtive, 0: positive
+    return ((cal_temp & BIT(8)) != 0)? -(uint8_t)cal_temp: (uint8_t)cal_temp;
+}

components/soc/esp32s3/include/soc/soc_caps.h

@@ -39,6 +39,7 @@
 #define SOC_FLASH_ENCRYPTION_XTS_AES_256 1
 #define SOC_PSRAM_DMA_CAPABLE           1
 #define SOC_XT_WDT_SUPPORTED            1
+#define SOC_TEMP_SENSOR_SUPPORTED       1
 
 /*-------------------------- SOC CAPS ----------------------------------------*/
 #define SOC_APPCPU_HAS_CLOCK_GATING_BUG (1)

docs/doxygen/Doxyfile_esp32s3

@@ -8,6 +8,7 @@ INPUT += \
          $(PROJECT_PATH)/components/driver/include/driver/pcnt.h \
          $(PROJECT_PATH)/components/soc/$(IDF_TARGET)/include/soc/touch_sensor_channel.h \
          $(PROJECT_PATH)/components/driver/$(IDF_TARGET)/include/driver/touch_sensor.h \
+         $(PROJECT_PATH)/components/driver/esp32s2/include/driver/temp_sensor.h \
          $(PROJECT_PATH)/components/ulp/include/esp32s3/ulp_riscv.h \
          $(PROJECT_PATH)/components/usb/include/usb/usb_helpers.h \
          $(PROJECT_PATH)/components/usb/include/usb/usb_host.h \

docs/en/api-reference/peripherals/temp_sensor.rst

@@ -1,12 +1,6 @@
 Temperature Sensor
 ===================
 
-.. only:: esp32s3
-
-    .. warning::
-
-        This feature is not supported in v4.4
-
 Overview
 --------
 

examples/peripherals/temp_sensor/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-S2 | ESP32-C3 |
-| ----------------- | -------- | -------- |
+| Supported Targets | ESP32-S2 | ESP32-C3 | ESP32-S3 |
+| ----------------- | -------- | -------- | -------- |
 
 # Temperature Sensor Example
 

examples/peripherals/temp_sensor/main/temp_sensor_main.c

@@ -14,7 +14,7 @@
 
 /* Note: ESP32 don't support temperature sensor */
 
-#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32C3
+#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3
 #include "driver/temp_sensor.h"
 
 static const char *TAG = "TempSensor";